What should be the hood for the manga?

Mangal – the necessary thing in private household. This useful device can be of various sizes. For large stationary devices that are used in arbors or other rooms, a good extract is required.

What should be the hood for the manga?

Peculiarities

Mangals can be portable and stationary. Mobile option is a simple design that can be collected yourself. Do not need to do with such a device.

Stationary brand is a more monumental structure that has a large volume in the premises.

What should be the hood for the manga?

What should be the hood for the manga?

This unit is designed to prepare dishes for a large number of people. Fuel for its normal functioning need noticeably more. Without good drawing effectively work this design will not be.

In such devices, at first glance, there is nothing complicated. However, there are nuances to know. Big Mangal must have good ventilation that would allow combustion products. Such devices, including barbecue, are often sold with ready-made hoods.

What should be the hood for the manga?

What should be the hood for the manga?

Views

The device itself is made according to the principle of exhaust umbrella; is a small dome in the form of a hemisphere, cut pyramid or parallelepiped. Often, such extracts are decorated and become an integral part of the overall interior. They look natural and organic.

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

Mandatory condition: percentage dome area should exceed the area of ​​the equipment itself. Only in this case can be effectively assembled and deleted combustion products. Prerequisite is also the presence of a high pipe and fan.

No less important characteristics:

  • Chimney necessarily has a narrowing and bending, which will make it possible to generate a good craving. Optimal is the distance between the soil and the upper point of the pipe at least 2.8 meters. The higher the pipe, the better the thrust.
  • On the top of the pipe is the heat-resistant sparking. According to the design, it looks like a sieve through which smoke is fluent.

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

  • It is necessary to put a grease trap in the form of a frame form with a replaceable capacity. It accumulates fat meat. Such a capacity is periodically changing or cleaned, depending on the design.
  • Must be able to present the smoke – a fan that creates an additional air exchange and increases the removal of smoke.

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

All of the above items on your device are simple.

It is important that they were correctly fitted.

What should be the hood for the manga?

In specialized stores for sale ready-made “umbrellas” from metal, on which there is a channel smoke collector. They can be adopted to homemade equipment.

Often the extractor in large mangals is supplied with a fan, as well as a forced blower providing additional cravings. The device itself has standard parameters and is not something complicated in technical terms. If the equipment is non-standard, it can be ordered in a specialized organization. For example, there are companies that make draws even with complex turns of the pipe or open design.

What should be the hood for the manga?

Execution of an individual order with additional options may cost quite expensive. So as not to spend extra, you can do everything you need yourself.

Standard parameters of the four-tie exhaust for mangal, working on firewood:

  • Metal, which is suitable for such products, has a thickness of 1 to 3 mm;
  • The length of the smoke collector is 855-1550 mm;
  • Width – 660-950 m;
  • pipe tall at least 3 meters;
  • Pipe section from 255 mm.

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

Sizes may noticeably vary. However, it is important to maintain the proportions.

What should be the hood for the manga?

What should be the hood for the manga?

How to make yourself?

Metal extract has the following advantages:

  • low weight;
  • It is possible to establish additional options;
  • low price;
  • simplicity of design;
  • Easy in montage.

What should be the hood for the manga?

What should be the hood for the manga?

Brick masonry has indisputable advantages: such a design can, to chase a thousand years without visible damage.

It is important only to clean such an object from soot.

What should be the hood for the manga?

What should be the hood for the manga?

After all, it addicted to the quality of the cooked dishes and the operation of the air duct. The thrust sooner or later will decrease due to the accumulated mud, so it is best to make preventive cleaning.

What should be the hood for the manga?

What should be the hood for the manga?

It is important to determine the very beginning, what kind of exhaust device is preferable.

Materials needed to create a metal hood simple:

  • Iron sheets 1-3 mm;
  • corners with a cross section of 30 x 30 x 30 mm;
  • bolts;
  • Thermo Primemer.

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

The height of the umbrella can reach 2 meters, the optimal mangal size with this 110 x 65 cm. The umbrella is composed of three nodes: bases, dome with inner mount and pipes.

Do it yourself make a hood for the mangala easy. First marker on a sheet of metal makes a markup, which corresponds to previously drawn sketches. Then the necessary components are cut with the pulp, the parts layout and the welding of the joints are made.

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

Brick extract has its own characteristics. It creates from a special brick (chamotte), mixed on clay and sand. Clay must be a certain variety and dump in water for 48 hours. In brick extracts, a special frame is made on which the brick is put on. In this case, the material should be treated with a special refractory enamel.

Rama is fixed with mangal reinforcement on anchor bolts or with welding.

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

After that follows the laying brick. The basis, that is, the first is glad, puts the push of brick, the most short. An ordinary smoke collector consists of 9-11 rows. The masonry is done with such a calculation so that it narrowes, that is, the offset occurs about 16 mm for each level, on the end part 35 mm. Then placed from brick pipe square shape.

At the top of the pipe constitutes the section 265-265 mm. This figure is obtained empirically, it is optimal for the operation of the intensity, while the height of the pipe is about 3 meters.

What should be the hood for the manga?

What should be the hood for the manga?

IMPORTANT After the end of the masonry to withstand at least 3-4 weeks, so that the design stands for greater strength. Hurry to use “raw” construction can not. This can lead to strain and cracking material.

The surface is covered with a special primer that will protect from high temperatures. As you can see, there is nothing superpower in technological attitude in such works, make a masonry can a person with minimal construction skills.

What should be the hood for the manga?

Before starting to work, corners should be carefully cleared, then cut the right amount.

When working, you must use protective glasses and gloves.

What should be the hood for the manga?

What should be the hood for the manga?

Choosing materials

Metal exhaust is recommended to mount strictly in the center so that it hover over the equipment. The pipe is closed by a visor, to protect from moisture. Material is commonly used – copper or stainless steel, which is best opposed to corrosion. Such materials can be operated for a long period of time.

Metal hood is the most acceptable option, it is relatively inexpensive, and has excellent operational qualities.

What should be the hood for the manga?

A red or chamotte brick is also used for drawing, which has no less good technical indicators. The solution used for masonry is made in proportions of 1: 3, where 1 is the grade cement is not lower than 400, and 3 shares are a seeded sand.

What should be the hood for the manga?

What should be the hood for the manga?

Accessories

Components for creating an exhaust for large mangal are required as follows:

  • pipe;
  • sparking;
  • grease trap;
  • Fan with engine.

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

All components are collected from different sources. Mangal fan can be purchased in the store, the sparking and grease trap is easy to make from a metal sheet. The most important element is a pipe that must match the operating power of the device. If the cross section is too small, the combustion products will fall into the room, which is extremely undesirable. Before creating an exhaust you need to make a detailed drawing and spend thorough calculations.

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

Building drawings

Properly compiled drawing – this is a guarantee of the impeccable operation of the device for many years. The cross section of the pipe and the weight of the mangala – these are the main parameters that need to be taken into account during the study of the plan scheme. Start building a drawing follows from a sketch and applying the basic dimensions of the mangala. Based on these numbers, it will be possible to calculate and draw the extract. A properly compiled drawing will also make it possible to calculate the number of required material. Avoid its overrun.

What should be the hood for the manga?

Instructions for assembly

  • First, the dome is going. Then the pipe is going and fixed.
  • After the end of the welding work, the seams are processed by a grinder. The finished surface is covered by anti-corrosion primer.

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

  • Then you should mark the metal that will go to the trim of the exhaust umbrella. On the corner of the workbenk the sheets are bent. Metal is attached to the base with rivets and bolts;
  • In the dome on the diagonal, it is recommended to place a metal plate (size 98 x 35 cm), which will contribute to improved traction. An indentation from the edge should be made about 1.5 cm, the plate will be attached for these edges.
  • The base is mounted on the grill with anchors or special self-tapping screws. After the dome is installed and the pipe is fixed using rivets.

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

The pipe can be made and brick, but in this case it will be wearing much more.

Under it will require a massive durable basis so that it does not occur during the operation of the deformation or distortion. Exhaust brick umbrellas are created according to a simple principle: a metal frame is cooked, which is placed with refractory material.

Often the extract can be decorated with wild stone. Metal umbrella can also be trimmed with wooden panels; Thermal gasket should be present between the panels and the metal.

What should be the hood for the manga?

What should be the hood for the manga?

Where you can apply?

Extraction can be used in any room:

  • on the balcony;
  • in a glazed gazebo;
  • garage;
  • East Kitchen Restaurant Hall.

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

What should be the hood for the manga?

If everything is done correctly, in closed premises, the extractor will work smoothly for a long time.

What should be the hood for the manga?

What should be the hood for the manga?

Useful advice

The chimney section is recommended to do the optimal, from the diameter of the pipe by 80% depends on how the chimney will work. Metal design must have a cross section of at least 16 cm. Brick chimney must have a cross section of at least 26 cm.

Length of the exhaust pipe – the key to good thrust. The design should be sufficient enough, otherwise the smoke will enter the room. When creating a manga and drawing, it should be remembered that the material is obliged to match the temperatures in which the process occurs. Otherwise, too thin metal will be deformed. It is also impossible to use asbestos in construction, this material is technological, but unsafe for health.

What should be the hood for the manga?

What should be the hood for the manga?

See below.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment