Subtleties Building Shed from Osb-Plate

To complement the house by various buildings – a very important component of the part in the arrangement of any country or utility ownership. But auxiliary facilities have long been required not only reliability and strength, the aesthetic parameters are now crucial. To full extent, this requirement refers to the sheds, to economic blocks.


The whole majority of developers, creating a barn with their own hands, trims it using OSB-stoves. Clumsy boiling of boards, as well as painted sheet iron already look archaic on this background. Oriented plate is available at a price and convenient to work. The love of the walls is made only after the roof finish is completed. At the same time, only after the final decoration of the walls there is a queue of installation of doors, windows, and so on.

Design and accommodation

Previously, you should decide whether the barn will stand apart, or it will be torture to the house.

You can build it in the same time in approximately the same time, but there are other considerations:

  • Under the development there is worth to give the least valuable for growing fruits and for decorative plants, the land plot;
  • It is best if you can not only approach the utility structure, but also drive up by car;
  • It is recommended to choose a point where it makes it easier to get to the house, and to any place in the garden (garden), and to the gate at the same time.

Despite the seeming simplicity of the upcoming work, it is not necessary to make light cozpostroys without drawings. It’s not just that there may be bad visual characteristics. It is the drawing or at least a sketch that is extremely important to choose the right place and to assess suitable sizes, as well as to calculate the general need for materials.

Important: It is worth first to make a general plan of the territory of the existing and planned development, and only then begin to compile more private projects.

This will avoid many ridiculous incidents, often overtaking inexperienced builders.


Step-by-step instructions In any case, prescribes first to clear the platform and align it to ideal hydraulic levels. It is categorically unacceptable to leave bushes and even grass or single roots. The easiest way to make the foundation itself is the use of finished blocks. They are unfolded around the perimeter. Alternative – a polenue base, there will already have to dig the pits and after frowning the pillow from the sand, put inside the vertically the same designs.

Another method consists in the spilling of a concrete solution, which, frozen, turns into an excellent basis.

Next steps during construction will be:

  • Low strapping assembly;
  • processing its antiseptic;
  • Floor flooring from boards, which are protected from rot;
  • Installation of the original frame rack and fix it on a metal corner;
  • Attachment of the temporary strut for greater rigidity;
  • fastening sheet OSB;
  • Repetition of the same manipulation with other racks.

When all this is completed, it will only take to paint the walls and make the threshold. It is recommended to fix the sheets to the bottom line of the frame with an indent 50 mm. It is achieved by adding the height of the necessary height to the initial strapping. After the sheet rests in this part lock, it can be transferred to another place and repeat the procedure. The most rational sizes for the shed – 3×6 m; less impractical, and increase area additionally required not all.


If the foundation is poured using formwork, it is enough for it to perform at 20-30 cm. In the pillow of a mixture of sand with gravel in front of the fill of concrete It is worth introducing fittings. The roof is almost always done with one-sided, more complex options are needed in exceptionally rare situations.

The distance between parts of the rafter complex ideally is 60-80 cm, according to this, the number of rafter feet is calculated.

Roof coating galvanized steel allows you to abandon the crate. List layout should be made with the allen. If it is decided not to seize outside the wall siding, but to apply the edged board, the recommended nastybest is 2.5 cm. This avoids the occurrence of cracks upon subsequent drying and shrinkage of the material; paint is most often applied to the finishing elements in front of the trim. You must not forget when designing a regulatory distance to other buildings, to neighboring fences and to public roads. For the formation of floors, boards with a thickness of 4 cm, not having grooves.

Floor insulation is most often mineral wool. Safder is conducted from the wall to the entrance. If possible, it is worth the shed in the backyard, where it will not spoil the view. The entrance layout should be as free and easily accessible to use it. The best places are located on the sublime areas, and raising the barn over the ground, you can additionally protect it from corrosion and rotting; It is advisable to immediately design everything so that the need for an extension.

How to build a barn from Osb-slab with your own hands, you can learn from the video.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: