Almost everyone who has a country house, stored on the firewood area to melt the oven in the house, bath or just make a barbecue. For storage of firewood use various options for Woodrovnikov. Even if the cottage for someone is only a place for summer holidays and does not imply travel there in the cold season, firewood is needed to escape the bath or make kebabs. Of course, you can use coals in the package or buy popular knitting firewood in the summer season, but it is very uncomfortable if the cottage is in the distance from the shops. That is why there is a small margin of firewood, as a rule, on any summer cottage.
If the cottage needs heating, the stove on firewood will become a real “salvation” for a country house. Agree, not in all houses there are sufficient electricity capacities. In addition, it is the easiest and cheapest type of heating. Finally, the oven is an indispensable attribute of the country rest: it is beautiful, creates a comfort and atmosphere. Many people pointed firewood for the whole season and keep them in specially equipped woodwood. This allows you to protect firewood from precipitation and dry more raw firewood. In this article we will tell about the ways of making a wobbler for giving with their own hands.
Device
Woodrovnik is a design of wood or metal that is used as a warehouse for firewood. Woods for giving can be completely different, the main thing is that they satisfy the basic requirements.
- The device must be roomy and allow access to firewood without difficulty.
- The wrapping must be open so much so that the firewood is not reset and ventilated. If fresh lamps lie in the woodwood, then they should be able to dry.
- The design should have a roof that protects the lamps from rain and snow.
- Woodrovnik should be located so that they do not hit the straight sun rays. Ultraviolet badly affects wood, reduces its suitability for use for intended.
- Of course, it is desirable that the woven is careful to not spoil the entire landscape of the site.
There are various options for the designs of Woodrovniks, depending on their location and type.
Woodrovnik who leans to the building (house, shed, bath)
This is the simplest design, which has a wall of the building is the rear wall of the woodwood. But this design has a number of serious flaws:
- Fire hazard. Large volume of dry wood at home.
- In the wood dwells a large number of insects. This problem can be solved by processing the woodwood with a special composition or separating firewood from the building using a metal sheet.
The wrapping of the building is recommended to be located from the north or where the most open place for winds. Of course, a canopy at the wall is a very simple design, so it may not be distinguished by beauty. Such a canopy is better to hide with the least visible part. The simplest scheme is 4 supports, elevated floor and 4 walls with a canopy.
Woodrovnik, standing apart from buildings
This is more beautiful and reliable building. Such a device involves design and construction plan. Such a canopy can be built in a suitable place and even decorate the landscape. The Woodrovnik will require you time, but it will serve for a long time, and the firewood will constantly blow up from all directions.
Portable
Separately, it is worth saying a portable wobbler, which is necessary for storing a small amount of firewood. Such options are needed to keep firewood closer to the place of use. These are structures of wood or metal, which simply move along with firewood. As a rule, these are beautiful designs that complement the interior. Portable woodcover should:
- be
- be
- Easily tolerated.
Such wobbies are located indoors. You can see such structures next to the fireplaces in the house.
How to choose Material?
Sometimes the woven is hiding in the most distant or imperceptible corner of the plot, and then it is built without thinking about the appearance. Used can be any blowed materials, remnants of various boards and logs. You can make a wrapper without walls and supports. Then smoothly folded firewood are covered with any material that will protect them from precipitation.
The most common material for wipers – wood. Wooden wobbiers make from boards and bars. Also use metal elements. For example, pipes covered with board. Roof make from any lung, but hard material. For example, galvanized iron, professional flooring, slate (it is pretty heavy), Ondulin, rubberoid.
When choosing materials for the Wrong, it is important to pay attention to its design. If the style is suitable for a simple wooden woodwood, the design will be from boards and bars. If you plan to use the metal not only for the support, but also for the walls of the woodlover, then you can think about the wrought. Often portable wobbies make metal.
Here are what materials will be needed to create a conventional wooden wobbler.
- Board board. It is necessary that the lamps are not lying on the ground. The board is worth choosing a thick, no thinner of 2.5 cm so that it can withstand firewood.
- Concrete blocks, instead of foundation.
- Bar, logs. For the basis of the floor.
- Boards for carcass.
- Bar for carcass.
- Boards for the roof.
- Roofing material. Polycarbonate, slate or professional flooring.
- Nails and selflessness.
Required tools:
- electric drill;
- shovel;
- screwdriver;
- plumb;
- axe;
- roulette;
- hacksaw;
- screwdriver;
- Galnik.
eight
Photos
Barrels, former rabbits for rabbits and even pallets and rings for wells are also used for the construction and construction of original wobbies. Such options do not require the creation of drawing and differ not only by external originality, but also the ease of creating a design.
How to make it yourself?
Below are the instructions for the creation of Woods. Let’s start with an option separately standing. For the construction of such a design, it is necessary to make drawings for the manufacture, so that the woven turns out the specified size and fit into the landscape. The basis will be 6 logs. These are supports that create a frame. Consider how to build a woodwood stages.
- Determine and designate the construction area on the site. Drop 6 holes under the support – 3 in the front and rear. The dimensions of the recesses are not less than 30 cm by 30 cm, and the depth of up to 50 cm. Pulling up the yams with rubble at 15 cm and sink. Make pits for logs.
- Logs need to deepen 25 cm minimum. Treat a log antiseptic. Wrap Regularoid. Secure support concrete or stone. Ends of logs, too, treat.
- The length of the logs in the front and rear must be different, to create a rope slope. Rear logs must be lower than the front no less than 3 cm.
- Place the transverse lags, the basis for the floor. Secure them by connecting with supports. Transverse lags should be raised above the ground by 10 cm to provide ventilation.
- Install floor boards on lags. Distance between boards Leave a small, up to 2 cm, for ventilation from the floor. Use for fastening the tapping screws on wood and screwdriver. You can use nails.
- Wall form from three sides of the boards. Step between boards about 15 cm. You can use the grid. This is a cheapest option, but less beautiful.
- Install 3 rafters on a wrapping frame to make a roof. Across place another 5 logs. Secure roof on frame. Use nails for slate and runnerdoor. Self-tapping screws are used for fastening of professional flooring and ondulin.
- It is possible instead of 5 logs for the roof frame apply duch and cover it with rubberoid or other roofing material.
- Cover the tree varnish. You can paint the woodwood paint and decorate with decorative designs.
Note the following details.
- Be sure to keep into account the roof slot so that the snow is unhindered down.
- The roof must be greater than the woodwood. The protrusion should be about 25 cm.
- Necessarily the presence of a floor that is raised over the soil by 10 cm.
- In the walls and in the floor should be the lumens for free ventilation. These elements are made of wood.
- All wooden materials before fastening. Proceed by antiseptic.
- Decorate the Woodrovnik can be carved, plants, sculptures.
- To protect the firewood from moisture, create drainage.
To build a woodwood that adjoins the building, no special instruction needs. It is created as well as a separate woven. Such a wrapping should also be well ventilated, because one wall has a solid, unlike previous variation. The materials for the roof and frame are used the same.
There are a number of distinctive features for such a building.
- It is necessary to draw attention to the fact that the Woodrovnik stands back to the house. It is necessary to make water from the roof of the building not falling on firewood.
- Watrovnik located from the north will warm the north wall of the house. The house will close firewood from unwanted light.
- In this case, sex also needed. Firewood should not be stored right on earth.
- To give aesthetics, you can make the doors that close firewood. If you connect the woodcut on the covered terrace, then go out of the lamps from the house will be more pleasant and easier.
On the Internet you can find many ready-made projects with drawings and pictures for various woodcuts. An option that you prefer depends on the availability, requirements for the capacity, availability of materials and fantasies. The size of the wreck will be determined not only by the presence of a place on the site, but also how much firewood is required for storage of firewood.
Consider some more options that will look original and allow the use of infirm materials. Woodwood from barrels can be done very quickly. Make a rings from the barrels, knocking down the bottom. Install barrels to each other and secure. Fold in barrels, but do not forget that the firewood is needed, so it’s not close to fill the barrels.
Drugs are also made from the old house for rabbits. If these buildings remained on your dacha, which are no longer applied to destination, then make a place for firewood from them:
- Disconnect the doors;
- Clean the roof so that it is strong and protecting firewood from precipitation;
- Repair frame or replace it with a grid.
You can also make a woodlover from pallets. This option is very easy. Boards in pallets are already choking at a distance. It remains only to assemble the design of the design. From 5 pallets you can make a cube that put on the basis or cover the roof. You can make a big barn of cubes. From concrete rings you can also make a woodlover. To do this, you only need to put a ring horizontally or a few rings and secure. This is the easiest idea for the woodwood.
Spend a little strength and time to create a comfortable comfortable to you and protect firewood stocks from bad weather and damp. Proper storage will not only save firewood, but will make them more suitable for use. The woodwood can be not only convenient and necessary built on your site, but also become an element of decoration. Woods are decorated with carved elements, plants, basins. Next to the woodlover can be located a shop. It is advisable to perform a wobbler in one style with other buildings. It all depends on your desire and fantasy.
About how to make a woodwood for giving with your own hands, look in the video below.
