How to make a mini smoking yourself?

How to make a mini smoking yourself?

Make a mini-smoking room yourself quite easily, you only need to focus on the prepared drawings, follow the step-by-step instructions and take into account when implementing similar works, important nuances. There are several popular ways to manufacture such structures, and each of them has certain features.

How to make a mini smoking yourself?

Cold

Cold smoked facilities can be created from a variety of materials.

The following is a step-by-step instruction for the manufacture of smokelines using polyethylene coating.

  • Prepare 2 m plastic films, it must be quite thick (it is better to choose a coating that is used for greenhouses). Slide the sleeve of films from one end so that it ultimately become like a bag.

How to make a mini smoking yourself?

  • Then you will need to prepare a place for the future design (for it one square meter is enough). Make a platform as smooth as possible and secure in all its corners two-meter stakes. Using crossbars, you will need to connect the installed items. The construction should be quite sustainable.
  • Connect the stakes that are opposite to each other using diagonal rails (you will need to do 2-3 rows).

How to make a mini smoking yourself?

  • It should be tightened to the resulting building “Bag” from polyethylene. Then pour hot cornes on the platform and put green grass on them.
  • The design should be sealed, so it will be necessary to press it with something on Earth.

How to make a mini smoking yourself?

So that in the construction is constantly thick smoke, put fresh grass when it is necessary. After a few hours, remove polyethylene and give meats to ventilate. If necessary, you can proceed it again, just need to wait at least a day.

How to make a mini smoking yourself?

Hot

Hot smoked facilities most often make metal. Very good for this stainless steel. It is better not to choose aluminum, because products can enter into interaction with such material.

Prepare the following materials and tools:

  • Two metal sheets (dimensions – 610×1565 mm, thickness – 2 mm);
  • Bulgarian;
  • apparatus for welding;

How to make a mini smoking yourself?

How to make a mini smoking yourself?

How to make a mini smoking yourself?

  • Thin reinforcement rods;
  • joiner’s corner;
  • meter.

How to make a mini smoking yourself?

How to make a mini smoking yourself?

How to make a mini smoking yourself?

Creating a hot smoked design is carried out like this:

  • Cut on 4 parts one of the sheets, applying a grinder for this. So that the structure was square, make sheets the same.
  • With drip welding, connect two sheets with each other. They must be located relative to each other strictly perpendicular. To ensure that you use a carbon black area. Adjust the position of the items if it is necessary. Then just also connect other sheets.
  • Neatly negotiate all the inner seams of the structure so that it will be maximally sealed.
  • Take another sheet of metal and create a bottom for design. Attach it to the box that was made earlier.

How to make a mini smoking yourself?

    • Make the shock lid. Make sure it is easy to wear on the box.
    • Weld to iron handle housing. It will also be necessary to attach the rods to the housing, on which the pallet is usually held. From above there must be a rod for hooks where meat will hang.

    If desired, the sizes of the structure can be increased or decreased. The most important requirement is one thing: absolute tightness.

    How to make a mini smoking yourself?

    Bucket

    Create your own hands the smokehouse from the bucket is needed as follows:

    • Pour wood sawdust on the bottom of the container (there will be a layer of 1-2 cm). Install the lattice of 10 cm from the bottom: it will be produced on it.
    • Put on the fire closed with a lid bucket. Smoking should be completed, before you remove the cover should not.
    • A sign that the process began – smoke or steam. The construction itself should not become too hot.

    How to make a mini smoking yourself?

      • You can find out the temperature with water. Drip a bit on the lid. If there is only hissing, not boiling, with temperature everything is fine. Meat is not welded, but processes well.
      • To adjust the temperature, you need to put the fuel or remove in the direction of the coal. Usually meat smokes for half an hour or a little longer. First have to sometimes remove the design from the fire and trying food. When the process is mastered, no need for such actions.
      • When the products are swapped, remove the bucket from the fire and let it cool. Need to extract meat and give it a bit lightly.

      How to make a mini smoking yourself?

      In the apartment

      To create such a smokehouse for giving, you need to do the following:

      • Welsh stainless steel box. It should be relatively small, approximate height – half meter. Then we turn into the cover of the iron tube: With this element, smoke will be output.
      • Will need to take the hose and put it on the tube. Out it in the window.
      • Install the cover in special sides equipped in advance.

      How to make a mini smoking yourself?

        • So that the box does not go smoke, pour water into flights.
        • Take the sawmakers from Alder and place them on the bottom of the construction. Approximate layer thickness – 1-2 cm.
        • Breeding sides for pallet. They must be approximately 10 cm from the bottom of Smoke. The grid for products will need to set 20 cm from these sides.
        • Take the lid and cover the homemade design, fill the sides with water. Put the shock on the gas stove, turn on the gas. After that, products will start to shock.

        How to make a mini smoking yourself?

        Old refrigerator

        Owners of sites that are outside the city are often made from old refrigerators Cabinets where various important things are located. However, do not everyone know that there are good small smokers from such structures.

        Such structures are created according to a specific scheme.

        • First, remove all unnecessary from the refrigerator, the box and door must remain.
        • To build a chimney pipe, do the hole over the box.
        • Then fasten three pairs of metal corners on three different levels. They must be on the side walls of the case. Hooks and grilles will be installed on the first two levels. The pallet will be in the corners located below.

        How to make a mini smoking yourself?

        How to make a mini smoking yourself?

          • You also need to prepare a separate pallet for sawdust. Place the electric tile on the bottom and place this pallet on it.

          How to make a mini smoking yourself?

          • Make sure the door will be well closed. The amount of air falling into the smoke must be minimal.

          How to make a mini smoking yourself?

          Barrel

          Since the barrels are quite large, there can be many products in them.

          Creating small smokers from barrels is as follows:

          • Rinse and dry the container if it is made of wood. Remove the old paint material from the barrel if it is made of metal.
          • In parts of the barrel, which is the top, set on the walls of the attachment, where the rods will be.

          How to make a mini smoking yourself?

          How to make a mini smoking yourself?

            • From the finished pipe (height – about half a meter, diameter – also approximately 0.5 m) or metal sheets will need to make a “glass”. Do on the bottom of the tank hole hole of the same size and paste the resulting “glass”. Do not make the walls of “glass” too thick, it will be enough 3 mm. If the container is made of wood, it will need to be protected from overheating with asbestos cloth.
            • Products will shock while the saws are burned. Usually it takes about 60 minutes.

            Meat will be completely prepared when the construction will cease to be hot. After that, it will be necessary to remove with sawdust products that did not have time to burn.

            How to make a mini smoking yourself?

            Balloon

            An unnecessary cylinder from Propane can be used to create a design designed for smoking.

            Redoing him in the smokehouse is quite difficult, but you will be quite able to cope with such work if you consider all the recommendations specified in the instructions.

            • First you need to cut the valve and remove the remaining propane. For this you need to take a balloon away from home. Determine whether the cylinder is empty, you can use soap water: just apply it to the valve. You can start working if there are no bubbles.
            • The remains of gasoline will need to drain from the tank. Then it should be burned.
            • Take a clean balloon home. After that, it will be possible to start doing the design for smoking.

            How to make a mini smoking yourself?

              • First you need to take care of the door (its size must be quite significant). Then create a stand for design.
              • In the construction of the balloon there must be a combustion compartment. It is created from metal sheets (they should be rather thick). The finished flopping chamber will need to be welded to the balloon. As a result, a single structure should turn out.
              • Before applying the finished smokehouse, you need to hide it using for this firewood.

              How to make a mini smoking yourself?

              Features of the choice of fuel

              Pick up sawdust for smokers need, given the various important nuances. Appearance and taste of food largely depend on the tree of wood. It is better to choose a cherry, a pear, apricot, apple tree. In second place – beech, ash, alder, juniper, aspen, oak.

              Oak and red wood can affect the color of the products (so you can make a dish more interesting). In the first case, the shade will become browned or dark yellow, in the second – golden.

              How to make a mini smoking yourself?

              How to make a mini smoking yourself?

              How to make a mini smoking yourself?

                        You also need to take into account the following recommendations:

                        • Size of sawdust should be selected, focusing on the recipe and features of the product itself.
                        • So that there are less soot on the products, we wet fuel slightly.
                        • Do not use birch and coniferous colors. They do food not very pleasant to taste, bitter.

                        In the next video you will see how to make chips from wood residues after pruning the garden and vineyard.

                        Rate article
                        ( No ratings yet )
                        Share to friends
                        Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
                        Add a comment