Garage doors: Production subtleties with their own hands

Most of the men crazy about their car and ready to spend a bunch of time in the garage. But to build a capital garage and separate it as you want to invest consonants. Fortunately, you can master the subtleties of the independent manufacture of some elements of the structure, for example, garage gates.

All nuances associated with making, installation and care for them, and will be discussed in our article.

Garage doors: Production subtleties with their own hands

Garage doors: Production subtleties with their own hands

Views

There are the following garage gate options:

  • swing;
  • sliding;
  • Rotary (folding);
  • lifting-section (folding);
  • retractive;
  • Rolled (roller or roller shutters).

Garage doors: Production subtleties with their own hands

Now we will consider in detail the features of the design of each type, the schemes of their functioning, dignity and disadvantages. As well as tell about what material to choose to make a garage doors yourself (wood, galvanized iron or professional flooring) than to strengthen the sash and how to paint them.

Design features

To make reliable and high-quality gates with your own hands, you need to take into account the main nuances of the structure of each of their types.

Swing

Swing garage doors – the most common option known since ancient times with its reliability and convenience.

Garage doors: Production subtleties with their own hands

The design principle is extremely simple – the swollen doors consist of two sash, which is based on a metal frame. They can be wooden, iron, made of professional flooring. Close on the external and internal locks and deposits. For additional comfort in one of the doors, you can cut a wicket.

Main advantages: economy, simplicity of manufacture, high degree of security. Disadvantages: require free space before the garage for full opening.

Sliding

If you connect the drive to the unpaved gate, then they can be automated and turning into sliding.

Garage doors: Production subtleties with their own hands

Lifting-swivels (folding)

Modern, neat and compact option, more suitable for insulated garages located on the territory of protected cooperatives. The basis of the design is the door made of galvanized steel or aluminum, which rises up and fixes parallel to the floor with a hinge-lever drive, special guides and retainers.

Main advantages: Space savings, ease of operation. Disadvantages: high cost, low level of protection, complexity of manufacture.

Garage doors: Production subtleties with their own hands

Lifting-section (folding)

Very convenient variety of gates, providing high tightness and not occupying a large space. The schematic diagram is based on the refraction of the metal sash consisting of horizontal sections, in the process of opening and placing it under the ceiling.

The functioning of the mechanism is carried out by hinged loops connecting segments, and rollers moving along guide boards. Folding gates are characterized by good noise insulation, since each section is strengthened by the seal.

Main advantages: versatility. Disadvantages: High price, low anti-svliness.

Garage doors: Production subtleties with their own hands

Reloading

Relatively inexpensive, spectacular and easy to use option. The design works on the wardrobe principle and consists of one metal door moving along the garage wall using a system from guide and rollers. Retractable gate can be installed both outside and inside the garage.

Main advantages: budget, strength, durability. Disadvantages: the need to have a garage of a wide facade.

Garage doors: Production subtleties with their own hands

Garage doors: Production subtleties with their own hands

Rolled (roller)

Rare variety of light gates. Roots better use in protected cooperatives. The mechanism of its action they resemble rolling shutters and consist of aluminum plates that are collected in a special block fixed at the top.

Main advantages: Space saving, ease of operation. Disadvantages: fragility and unreliability.

Garage doors: Production subtleties with their own hands

After studying the features of the design of various types, it can be concluded that it is easiest to make and mount swing garage gates. Their production does not require the construction of complex drawings, the availability of professional skills and the use of a specialized tool.

And how to do it with your own hands, read below.

Garage doors: Production subtleties with their own hands

Manufacture

Unhindered installation and easy operation of the gate directly depend on the clear observance of manufacturing technology. We present to your attention a universal phased guide for the production of swing garage gates.

Garage doors: Production subtleties with their own hands

Purchase of the necessary materials and tools

To work, we will need:

  1. roulette;
  2. Corolnic;
  3. level (can be used both construction and hydraulic);
  4. Bulgarian;
  5. Apparatus for welding.

Garage doors: Production subtleties with their own hands

In the process of work will be used:

  1. corners for assembling the fastener frame (it is better to prefer to the corners of steel 65×65 or 40×40 mm);
  2. Cleaning for sash (most often used wood, professional flooring or solid metal sheet);
  3. a set of exterior and internal locks (valves or deposits at your discretion);
  4. profile (for example, the size of 60×30 mm);
  5. Hinged iron loops for mounting doors.

Garage doors: Production subtleties with their own hands

Measurement measurement and drawing creation

To make reliable and accurate gates without cracks and all kinds of irregularities, you need to carefully approach the measurement of the opening and subsequent transfer of the data obtained to the drawing.

Garage opening measurement algorithm:

  1. Measuring width. As a rule, this indicator varies from 3 to 5 meters, depending on the dimensions of the vehicle. Ideally, the distance from the car to the frame frame should not be less than 30 cm on both sides.
  2. We measure height. This size is also removed based on the parameters of the car.

Garage doors: Production subtleties with their own hands

We carry the obtained numbers on paper and indicate materials. The drawing can be arbitrary, most importantly, its accuracy.

Fastener Rama

Swing gates consist of 3 base elements: frame frame (crate), doors (sash) and loops.

First of all, you need to prepare the details and cook the crate, following the technological order:

  1. We take a harvested corner and cut it into several equal parts. The first half must be proportioned by the width of the garage gate, the second corresponding to their height.
  2. The resulting segments lay out onto a flat surface at right angles, thoroughly checking the degrees by roulette-coal.
  3. Now we need to cook the crate from the finished parts.

Garage doors: Production subtleties with their own hands

Frame sash

Work at this stage should be performed with special attention, because the tightness of the gate and the convenience of their operation depends on it.

Making the door framework includes the following points:

  1. We take the cutting pipe and divide it on a 4 piece of length, different from the height of the crate of 20 mm, and another 4, the size of which is calculated by the formula: the width of the crate / 2 – 35 mm. All these calculations are made to ensure the ease of future doors in the opening.
  2. Lay out parts on a smooth straight surface at an angles of 90 degrees, checking them by the coal.
  3. Weld segments with each other and get ready-made frame.

Garage doors: Production subtleties with their own hands

Sheaving

The covering is also one of the most important stages of work, since the appearance and functionality of the design depends on the literacy and clarity of its implementation. How to put the doors correctly?

We present to your attention a detailed guide:

  1. We take a pre-acquired material. For example, a solid iron sheet.
  2. Cut it in size. Moreover, the ledge of the left flap should go to the brass right by 2 cm.
  3. We weld the canvas to the frame first in the center and at the edges to fix them, and then throughout the perimeter.

Garage doors: Production subtleties with their own hands

Mounting loops

Before you start work, we purchased mounted iron loops for mounting doors. Now it’s time to install them.

This is done very easily:

  1. First you need to welcome the lower element of the loop to the frame frame, and the upper one – to the outside of the sash.
  2. Enhance the connection, applying a bent metal strip to the top of the loop and weld to the inside of the reinforcement liner.

Garage doors: Production subtleties with their own hands

Garage doors: Production subtleties with their own hands

Constipation and stopper

Selection and correct installation of a reliable lock ensures the safety of your car. Therefore, it is necessary to approach this stage with full.

Garage doors: Production subtleties with their own hands

Outside, the garages are usually closed using a mortise or mounted lock, and from the inside – with the help of a pillage.

Install mortise lock is not difficult, but How to mount the stopper we consider Read more:

  1. First we drive the pipe cutting into the ground – it will include the movable part of the stopper.
  2. As a movable part, we use the reinforcement pin. It must be done through the loop of the carrier flap.
  3. To ensure successfully function, it is necessary to constantly monitor the purity of the pipe.

Garage doors: Production subtleties with their own hands

Painting

Before final installation of the garage gate, the sash must be painted in order to protect the metal from corrosion and improving common aesthetic qualities. After pre-primer, frost-resistant paint for metal or enamel in 2-3 layers is applied to the door.

Garage doors: Production subtleties with their own hands

Garage doors: Production subtleties with their own hands

Insulation

In conclusion of the process of manufacturing the gate, it is necessary to perform their internal insulation, otherwise at least 50 percent of heat will be left out of the room. And, agree, warm garages are much more comfortable. For insulation, foam, expanded polystyrene foam or glass. The thermal insulation material is attached to the inside of the sash and closes on top of clapboard or wooden planks.

Garage doors: Production subtleties with their own hands

Garage doors: Production subtleties with their own hands

So, we examined in detail the main stages of independent manufacture of swing garage gates. It remains to understand their installation: how to raise the frame, hang the doors, secure the design and set the drive to automate it.

Mounting

After you have completed the manufacture of all elements of the gate design, you can start them.

Installation algorithm is also quite simple:

  1. First you need to install frame frames. They are attached to the dumps of the garage opening with long metal pins (15-20 cm).
  2. Speakers outside the pins cut off, grind and disguise the paint so that they do not interfere with the door to close the doors.
  3. Now you need to connect the inner and outdoor crates through iron plates – jumpers.
  4. It remains to hang out the flaps on the loop and evaluate the finished work.

Garage doors: Production subtleties with their own hands

Garage doors: Production subtleties with their own hands

For greater ease of operation, the swing gate can be equipped with a special drive that runs from electricity – this will make them automatically. The scheme of the action of such a device is based on the use of guides from the profile coming in motion due to the electric motor.

Garage doors: Production subtleties with their own hands

Folding and rising roll gates can also be mounted independently, if there are ready-made opening-closing mechanisms (sash, sliding parts, strips, rollers and locks) that are sold in construction stores. You will only need to make a frame and assemble the design, in accordance with the attached instructions, as well as perform its seal.

Garage doors: Production subtleties with their own hands

To install a rollback gate, even a frame will not need. Everything you need is to make from the professional sheet and compact a big sash. If you wish, you can cut the wicket. Installation is reduced to the location of the fittings according to the instructions.

Tips of professionals

So that everything works as best as possible, we take into account the opinion of professionals:

  • You should not be limited to reading a pair of articles with a guide to independent garage gate. Now on the Internet there are a lot of detailed video tutorials and reviews on this topic.
  • Choosing materials to work, prefer easier and more modern. Then the further operation of the finished design will not be difficult and will not require effort.

Garage doors: Production subtleties with their own hands

Garage doors: Production subtleties with their own hands

  • To create a competent and read drawing, you can use simple specialized programs, such as: Compass-3D, AutoCAD, Nanocad, Freecad and T. D.
  • When welding the framework parts, it should be remembered that for greater strength it is better to connect the edges of the corners laid by the brass.
  • For comfortable design, the design of the garage gate, smooth opening-closing of doors and the soft functioning of locks and constipation, it is important to remember their lubrication and monitor the purity of the systems.

Garage doors: Production subtleties with their own hands

Garage doors: Production subtleties with their own hands

  • In order to increase thermal insulation qualities, you can first clamp the seal with polyethylene, and only after that cover it with a clapboard.
  • Garage doors do not have to be standard and banal. There is a lot of stylish and original solutions for their creation and design. It all depends only on your imagination and budget.

Garage doors: Production subtleties with their own hands

Garage doors: Production subtleties with their own hands

In conclusion, we suggest you to see some photos of the finished garage gates of different types.

Beautiful examples

Such familiar swollen garage gates can also surprise us with their variety of designs from classics to modern.

Garage doors: Production subtleties with their own hands

Everywhere there is a creative place. Even in the garage! Especially if this garage is decorated with such a bright gate.

Garage doors: Production subtleties with their own hands

Garage doors: Production subtleties with their own hands

High-quality and laconic sectional doors – a sign of a good taste of their owner.

Garage doors: Production subtleties with their own hands

Garage doors: Production subtleties with their own hands

European style connoisseurs will undoubtedly come up with stylish and light rolls.

Garage doors: Production subtleties with their own hands

Compact and easy-to-use sliding gates look very spectacular.

Garage doors: Production subtleties with their own hands

How to make the gate with your own hands, look in the following video.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment