Doorhan Gate: Step-by-step independent installation instructions

Doorhan Gate: Step-by-step independent installation instructions

The car as a vehicle has become an indispensable attribute for many residents of megacities. For its service life and the appearance of enormous impact on the conditions of operation and storage. The garage equipped with a new generation gate is a reliable marina for the vehicle.

Doorhan Gate: Step-by-step independent installation instructions

Peculiarities

Products presented by the company Doorhan enjoys increasing demand. This company is engaged in the production and release of a large range of gates. Notable is that the panels for such structures are made directly in Russia, and not being taken from abroad.

The gate is installed by many car owners in their garages. Automatic adjustment, as well as setting up and programming the key fob allows, without leaving the car, freely penetrate into place of its storage.

Doorhan Gate: Step-by-step independent installation instructions

Doorhan Gate: Step-by-step independent installation instructions

A distinctive feature of the products of this company is the reliability and long period of operation. The degree of its protection against the penetration of foreign in the garage is very high. Acquisition price is quite affordable.

Possessing the skills of mounting and welding works, you can install the gate on your own, without resorting to the help of specialists. It is necessary to step by step to follow the points of the instruction (it is necessarily available in the kit purchased), tune in to the scrupulous preparatory operation.

Doorhan Gate: Step-by-step independent installation instructions

Doorhan Gate: Step-by-step independent installation instructions

Views

Doorhan manufactures and implements almost all types of garage gates:

  • sectional;
  • rolled (roller);
  • lifting-swivels;
  • Mechanical swing and sliding (sliding).

Doorhan Gate: Step-by-step independent installation instructions

Doorhan Gate: Step-by-step independent installation instructions

Doorhan Gate: Step-by-step independent installation instructions

Doorhan Gate: Step-by-step independent installation instructions

Sectional doors for the garage very practical. Thermal insulation is large enough – not lower than a brick wall thickness 50 cm, they are durable and durable.

This product is available in various versions. Doorhan provides for the presence of built-in wicket garage gates.

Sectional doors make from sandwich panels. The thickness of the canvas consists of several layers. The inner layer is filled with foam, which allows you to hold heat. Installation of such structures is possible in garages with small lateral seals.

Doorhan Gate: Step-by-step independent installation instructions

Doorhan Gate: Step-by-step independent installation instructions

Rolled (roller) The gate is a set of aluminum profiles, which by automatics are folded into a protective box. It is at the very top. Due to the fact that the gate is set vertically, their installation is possible on the garages, where the adjacent territory (place of entry) is insignificant or near the sidewalk.

Your name Rotary lifting The gate was obtained due to the fact that their canvas (shield with a system of rollers and locks) moves in space from the vertical position to horizontal, forming an angle of 90 degrees. Electromechanical drive controls the process of movement.

Doorhan Gate: Step-by-step independent installation instructions

Doorhan Gate: Step-by-step independent installation instructions

Sliding gates Made of sandwich panels with a smooth or structural surface. Sliding gate beams made from hot rolled steel. All steel elements are covered with a thick layer of zinc. It provides corrosion protection.

The most ordinary gates are Swing. They open out or inside. Have two flaps that are attached on loops with bearings on the sides of the opening. To go outside, it is necessary to have a territory in front of a house of 4-5 meters.

Doorhan Gate: Step-by-step independent installation instructions

Doorhan Gate: Step-by-step independent installation instructions

Doorhan has developed and implemented a high-speed rolled gate into production. Convenient moment with their intensive use is the speed of the workflow. Heat inside the room is saved due to the body’s ability to quickly open and close. Thermal losses are minimal. Made them from transparent polyester. This makes it possible to see the territory outside.

Doorhan Gate: Step-by-step independent installation instructions

Training

Before purchasing a gate made by Doorhan, you need to conduct their careful analysis and preparatory work at the installation site.

Often, the prugeni territory is not enough to install a lipped type of gate. It is necessary to correctly assess the situation (make calculations and measurements of all parameters, clarify how the design in the assembly will look).

Doorhan Gate: Step-by-step independent installation instructions

At the beginning of work, the ceiling height should be measured (the frame is fixed to it) in the garage, as well as the depth of the structure. Then measured how wide is simple. After you need to find out what is the distance between the upper point of the garage opening and the roof (there may be no more than 20 cm).

The opening is checked for the lack of defects. Cracks and irregularities should be eliminated by saving them with a solution, and after align all irregularities of plaster. It follows from two sides of the opening – external and internal. The entire further complex of work will depend on the quality of the prepared foundation.

Doorhan Gate: Step-by-step independent installation instructions

Before proceeding with the setting of the gate, you need to carefully check their complete set.

Doorhan Gate: Step-by-step independent installation instructions

The kit includes the following mechanisms: sets of parts for fastening and guide profiles; torsion engine; sandwich panels.

Alone to install the acquired gate, pull the cables, program automation in the presence of tools:

  • roulettes and screwdriver set;
  • construction level;
  • drills with a set of drills and nozzles;
  • riveted tool;
  • hammer;
  • span keys;

Doorhan Gate: Step-by-step independent installation instructions

Doorhan Gate: Step-by-step independent installation instructions

  • electrolovka;
  • knife and passage;
  • Grinding machine.
  • marker;
  • fixtures for fastening profiles;
  • screwdriver and bits to it;
  • set of wrench keys;
  • Tools for screwing up the springs.

Doorhan Gate: Step-by-step independent installation instructions

Doorhan Gate: Step-by-step independent installation instructions

Dressed need to be in special equipment, protective gloves and glasses.

All installation, welding works, and electrical connections are carried out only with good power tools.

Doorhan Gate: Step-by-step independent installation instructions

Mounting

The algorithm setting the gate is clearly registered in the instructions of the producing company.

Installation of each type is made taking into account the individual design features.

Doorhan Gate: Step-by-step independent installation instructions

Sectional garage doors are installed according to such a scheme:

  • Mounted verticals of the opening;
  • Carrier panels are carried out;
  • set balancing springs;
  • Connect automation;
  • Picks and drills are attached (on the gate canvas);
  • regulate the tension of lifting cables.

Doorhan Gate: Step-by-step independent installation instructions

Doorhan Gate: Step-by-step independent installation instructions

After connecting the electric drive, check the quality of the canvas movement.

Doorhan Gate: Step-by-step independent installation instructions

Let’s focus in more detail on the installation. At the very beginning it will be necessary to prepare and install the framework. When the gate is bought, they need to be released from the packaging and decompose to check for the presence of a configuration. Then pin the vertical racks attribute to the mind and make a mark (ignite) where they will be.

Doorhan Gate: Step-by-step independent installation instructions

Be sure to go to the edge of the garage opening, the sides of the lower part of the canvase should be found. In the case when the floor indoors is uneven, metal plates are under construction. Panels only horizontally. At the bottom section, vertical profiles are installed and fixed fastening places for racks. Must be withstanding a distance of 2.5-3 cm from the end edge to the node of the guide.

Doorhan Gate: Step-by-step independent installation instructions

Then on both sides of the opening of the racks. Horizontal guides are fixed with bolts and corner connecting plates. They are spinning, pressing tightly to the surface. So make a frame assembly. Upon completion of this operation, the sections themselves are embarked.

Gate manufacturers facilitated the assembly process. Place or drill holes for mounting panels do not have to be, as they already exist. Put lateral supports, loops and angular brackets (in the bottom panel). The design is placed on the bottom panel, which you need to adjust horizontally, and fastened with screws.

Doorhan Gate: Step-by-step independent installation instructions

The following section is taken. It needs to fasten the side holders and combine with inner loops. Side supports are placed in the previously made holes. After that, roller supports, holders and corner brackets are fixed on the top panel. All items are very tightly attached to avoid cliff designs and loosening them. The holes in the section must coincide with the holes below the loops.

Doorhan Gate: Step-by-step independent installation instructions

Panels insert in the opening of each other. Mounting begins with the bottom section; It is fixed in the heads of the sidelines. The panel itself should be the side edges to go for the sides of the gateway equally. On the corner brackets in the roller holders put rollers.

Separately, the indoors collected fixing profiles and install them in the vertical position. Racks are attached to the side parts of the opening. After a special plate fasten all horizontal and vertical guides. Frame carcass. Periodically, the level check the panel to be placed strictly horizontally.

Doorhan Gate: Step-by-step independent installation instructions

After attaching the bottom section, the average is attached, then the top. All of them are connected to each other, screwing the loops. At the same time, the correct operation of the upper rollers is adjusted, the cloth should be faced as close as possible to the pendant.

The next step is the fastening of the reference riser with self-assembly to the gate.

On both sides of the section there are places for fastening the cable, which is fixed in them. In the future, it is used to work torsion mechanism. In the process of work, you need to install videos in the place intended for them. After the assembly of the shaft and drum. The drum is installed on the shaft, they also put a torsion mechanism (springs).

Next is the upper section. Shaft fixed in advance prepared bearing. The free ends of the cables are fixed in the drum. Cable stretch into a special channel, which is provided for by the design of the gate. Attached drum with a special sleeve.

Doorhan Gate: Step-by-step independent installation instructions

The next stage of work implies the adjustment of the rear torsion springs. Install the buffers in the middle of the opening, the bars are fixed to the ceiling beam with the help of the fasteners. Further on the outside marks the place where the handle and valve will be attached. Fix their screwdriver.

The sleeve is put on the shaft, and on the guide on top they put the drive and connect together the entire design. The bracket and cravings are fixed on the profile and self-drawing all fasten.

Doorhan Gate: Step-by-step independent installation instructions

The final mounting operation is to install a guide profile that must be above all ceiling profiles. Next to the drive is a fastener beam, which ultimately fix the second end of the cable.

Cable tension is the final stage of the entire workflow. After this stage, the portable system mounted and installed in your own hands is checked for performance.

Automation of any designs is carried out using the drive and control unit. The selection of the drive depends on the frequency of their use and weight of the sash. Connected automation is controlled by keyboard, programmed remote control, buttons or switches. Also, designs can be equipped with an electric drive with a manual (gate) lifting system.

Doorhan Gate: Step-by-step independent installation instructions

Doorhan Gate: Step-by-step independent installation instructions

Sectional doors automate with chain and compound drives.

To raise heavy flaps, use the wedroom. In the case when the opening of the gate is low, use chain. They regulate the stop and lifting of the canvas. Signal Coded Device, Built-in Receiver, Radio Points Make these devices with comfortable and very convenient in operation.

Hydraulic drives are installed for sliding gates. So that the sections smoothly moved, use special rollers. The foundation in this case should be prepared in advance for roller carriages.

Doorhan Gate: Step-by-step independent installation instructions

Doorhan Gate: Step-by-step independent installation instructions

In the opening gates for automation use electric drives (connected to each sash). They have automation inside the gate, as they open inward or out. What automation to put on your gate, each owner will solve himself.

Doorhan Gate: Step-by-step independent installation instructions

Tips and recommendations

In the instruction manual, the developers of the doorhan gate provide advice on the right use of their products:

Car owners of the lifting and turning gates are not recommended to put their cars close to the garage. Opening ahead of the gate canvas can damage the vehicle.

When choosing a design, you should pay attention to the appearance of the canvas. It will be the central component of the entire garage complex.

Doorhan Gate: Step-by-step independent installation instructions

Pay attention to the garage walls. If they are made from ordinary brick, it is not worth strengthened. Strengths are subject to walls of foam blocks and other materials (inside hollow). Their strength does not allow you to insert the gate and use torsion’s effort. In this case, the frame is welding, which is inserted into the opening of the garage and fix.

Reviews

Most buyers remained very satisfied with Doorhan products. High performance characteristics are inherent in section and rolling gates. The key feature is the simplicity and ease of adjustment. Control automation is so simple that not only adult can cope with it, but also a child.

Doorhan Gate: Step-by-step independent installation instructions

Installation and installation do not require special knowledge and under the power to anyone. The main thing is to clearly follow the items of the instruction. Production itself is reliable and durable. Purchased goods delivered in the shortest possible time. Reasonable prices. Always to help are ready to come qualified specialists and advise on any issues.

How to install the doorhan gate, look next.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment