All about polycarbonate greenhouses 3×6

Growing agricultural crops on open ground – risk idea in conditions of unstable weather conditions in Russia. Polycarbonate greenhouse will protect your harvest at any time of the year.

All about polycarbonate greenhouses 3x6

All about polycarbonate greenhouses 3x6

Peculiarities

Greenhouse from polycarbonate 3×6 m can be constructed independently in the country. The total area of ​​the surface under construction is 18 square meters.

The approximate weight of the finished building is 125 kg. Previously, a film or glass was used as a clashing of greenhouses, which are not reliable materials.

All about polycarbonate greenhouses 3x6

All about polycarbonate greenhouses 3x6

Now experienced summer residents use cellular polycarbonate, which consists of 3-layers, reinforcing plants from ultraviolet rays, moisture and sharp temperature differences.

All about polycarbonate greenhouses 3x6

Planning

Before building a similar object, the plan should be prepared for work. After all, the design with imperfections in the end may be useless and will bring a small amount of crop.

The design of the greenhouse is performed in several stages.

All about polycarbonate greenhouses 3x6

Choosing a place

The ideal option will be a sunny place near the house, protected from strong busting winds. It is impossible to build a greenhouse on lowlands, as they are subject to freezing, and on a hilly surface, because then the greenhouse will not stand exactly.

All about polycarbonate greenhouses 3x6

Size definition

Size determined, the greenhouse will be 3 meters wide and 6 – in length. The height of such greenhouses is standardized – 2.1 meters. Further It should be marked with the selected place, using pegs and thread, pulling it on the outer edge.

All about polycarbonate greenhouses 3x6

All about polycarbonate greenhouses 3x6

Choosing a form of a greenhouse

The form directly depends on the type of plants that will be on your beds.

  • Arch. The most convenient and economical option. It is it that is suitable for sunlumular cultures. Such a complex is easy to install on your own. It is easy to operate, in winter snow does not accumulate on it.

All about polycarbonate greenhouses 3x6

All about polycarbonate greenhouses 3x6

  • House. Such a greenhouse is more specific, but inferior by illumination. Collect her already harder.

All about polycarbonate greenhouses 3x6

All about polycarbonate greenhouses 3x6

  • Bleam. It is presented in the form of a low greenhouse-semicircle with a shift lid. It is convenient for landing of low-grade cultures.

All about polycarbonate greenhouses 3x6

All about polycarbonate greenhouses 3x6

  • Dome. The most beautiful greenhouse, but complex in the installation. This design is well covered.

All about polycarbonate greenhouses 3x6

Planning Doors and Footers

All plants need fresh air, so the vehicle organization is required.

It is necessary to arrange them on opposite sides to avoid draft. Doors – entrance to the greenhouse and temperature controller inside the frame.

The width of the door must be 1 meter to be possible to drive with a cart and other large-sized tools.

All about polycarbonate greenhouses 3x6

All about polycarbonate greenhouses 3x6

Choosing a type of foundation

The foundation depends on the size of the greenhouse and its mass. Many prefer to put the greenhouse immediately to the ground, but it is this additional layer that protects the harvest from frosts, underground animals and insects. The foundation can be wooden, brick, filled. You can calculate the size in a special calculator.

All about polycarbonate greenhouses 3x6

All about polycarbonate greenhouses 3x6

Drawing

This item involves the preparation of the final drawing in two projections: from the end side and in length (side view). Its algorithm is simple and universal: to know the greenhouse parameters, take into account the maximum load on the frame, take into account the presence of the foundation, doors and forces.

Remember the components of the greenhouse: a flooded foundation, metal frame and polycarbonate coating.

The drawing will help you understand the shape, sizes and quantity of the required material, converting your ideas into a real picture.

All about polycarbonate greenhouses 3x6

How to calculate polycarbonate consumption?

One standard sheet of cellular polycarbonate, regardless of thickness, in length is 6 meters. The height of the structure is the main characteristic when counting. For our covered vegetable garden with a ceiling height of 2.1 meters and a length of 6 will need 4 pieces (6 m divide by 2), three for working on the frame and one more will go to the cutting of the ends. Relieve yourself from your finished drawing when buying all materials.

All about polycarbonate greenhouses 3x6

How to make out?

In the process of creating a greenhouse, you will need to paint and cut the material on the ends in places where there are protrusions and windows with the appropriate form.

Rules cutting:

  1. Prepare a place to work, pre-calculating the area from sharp and solid items;
  2. without removing the protective film, spread the sheet;
  3. Taking advantage of the drawing of the finished design, transfer the parts using the stencil marker;
  4. Next, you can cut sheets using a special tool, an acute stationery knife;
  5. Having completed cutting, clean the finished elements from sawdust and other garbage with a vacuum cleaner.

All about polycarbonate greenhouses 3x6

Assembly instructions

When assembling do not hurry. Be careful and take care of personal security using personal protective equipment.

You will need the following materials and tools:

  • polycarbonate sheets;
  • roulette;
  • building level;
  • fasteners;
  • drill.

All about polycarbonate greenhouses 3x6

All about polycarbonate greenhouses 3x6

The highest quality and strong construction includes a metal frame.

We start installing it on the finished foundation with your own hands.

This is the most difficult stage of creating a greenhouse, but thanks to the instructions, everyone will be able to assemble the basis.

  1. Install the lower bases on the edge of the foundation.
  2. Next, put arcs to the lower base, forming a frame.
  3. Collect the end parts, polycarbonate. Installation occurs on the lower base, fixing the details with two central elements.
  4. We put the fittings: we do the holes in the polycarbonate and insert the handles for doors and forces.

All about polycarbonate greenhouses 3x6

Polycarbonate Possment

The surface of polycarbonate is sensitive to mechanical effects. Try to keep it in a standing position before the start of work. Setting the coating is strictly in a certain direction. Sheets are undesirable to position horizontally.

Polycarbonate design coating starts with edges, regardless of the configuration.

  1. Make the front-face Polycarbonate on the end, before it remove the protective film. Material must perform over the end of 50-60 mm.
  2. Next step – wall covering. Sheets secure self-drawing on one side of the frame, pull it out and secure on the other. Sheets with each other to combine braziness about 10 cm to preserve tightness, not allowing moisture to penetrate the slots.

Installation of plastic coating on arched structures is made in the direction of the carcass arc.

All – you managed to build a greenhouse from polycarbonate on a land plot without the help of specialists.

All about polycarbonate greenhouses 3x6

How to equip inside?

Next important stage to ensure good harvest – organization of internal space. It is important to make a bed correctly before the summer season. Please note that building materials must necessarily be moisture-processed, processed special protective compositions, which will prevent the appearance of pathogens and viruses.

First of all, the location is a gyrome should be convenient for the growth of seedlings and care for them. Line East – West is an ideal location solution, since the sun will fall on the bed throughout the day.

Optimal bed width 70-90 cm, do not forget to leave a place for tracks. In our case, you can make 3 beds with a width of 70 cm and 2 tracks 45 cm.

All about polycarbonate greenhouses 3x6

For a large harvest, deep beds are needed (up to 60 cm). So that the soil does not face, we need a framing. To do this, use boards treated with special varnish from insects and mold or metal shields. Tracks are greenhouse decoration. Cover the trench gravel, and then finishing material – paving tiles, brick, flat stones.

You can also add accessory storage racks, racking barrels seedlings and thermometer. All this will fit perfectly in the greenhouse of this size.

For advanced gardens install drip irrigation systems, heating and lighting. Then your greenhouse will be the most cozy home for vegetables.

All about polycarbonate greenhouses 3x6

How to plant culture?

Nevertheless, the greenhouse is a limited space, and each meter must be used rationally. Wherein It should be planned how the cultivation of vegetables will be organized, because some plants can not be neighbors, and for this will have to distinguish between the territory.

There is a simple rule – you must first make the placement of the main culture, and then put the rest, given their compatibility.

Consider the planting schemes of basic seedlings for warm garden.

All about polycarbonate greenhouses 3x6

Tomatoes

There is a wide variety of varieties of tomatoes for closed soil. They are thermal-loving, prefer light soil, moderate watering. Tomatoes need air ventilation and circulation. therefore The best place for tomatoes is a central beds opposite the doors that are located in the ends. Good Neighbors for Tomatoes – Cabbage, Onions, Salad, Radish.

All about polycarbonate greenhouses 3x6

Cucumbers

Cucumbers require abundant watering and moisture. They cannot be planted with tomatoes, so the best option is to cover plants with polyethylene. A good neighborhood is the dill, salad, eggplant, parsley, basil.

All about polycarbonate greenhouses 3x6

Pepper

Sweet and sharp peppers can not be planted together – they can interoperass and change their taste quality. But they grow well next to basic cultures.

All about polycarbonate greenhouses 3x6

Other cultures

In the greenhouse, it is quite possible to plant strawberries and strawberries, while getting a harvest before the neighbors. It is important to displete plants at a distance of 15-20 cm.

In the spring, pay due attention to the preparation of the soil, it should be very nutritious and loose. Ideal composition – a mixture of soil from your site, peat or humus, as well as river sand.

You can use hydrogel before landing of moisture-loving crops: cucumbers and cabbage.

In closed spaces, the likelihood of bacteria and viruses is much higher. To do this, try to change the soil every year. In the fall you can fum the room with gray (checker).

In the spring, polycarbonate should be washed both outside and inside. In the summer after disembarking, the soil should be saved from weeds.

All about polycarbonate greenhouses 3x6

Overview of the greenhouse size of 3×6 in the video below.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment