All about carports from metal products adjacent to the house

Canopy from metal products attached to the residential premises is one of the most popular today. To make it easily, you will not need a lot of money, and this design will last for quite a long time. Major rule – Compliance with technology and correctly selected material. Otherwise, with a strong impact of the wind or a large snow load of the wall of the building, to which the canopy is attached, it will simply not stand and may be damaged.

All about carports from metal products adjacent to the house

All about carports from metal products adjacent to the house

All about carports from metal products adjacent to the house

Peculiarities

Sheds from professional flooring, adjacent to buildings, may differ in their design and materials. Installation of a metal canopy does not take much time (maximum 2 days), with its installation you can cope on your own (you can save on a call to a specialist). It is distinguished by its increased reliability and durability. This option of the frame fits perfectly into any common interior, suitable for rough architecture and standard classics.

Such canopies use:

  • for storing personal belongings and garden inventory;
  • as an additional seating area;
  • as a car garage.

All about carports from metal products adjacent to the house

All about carports from metal products adjacent to the house

Review of species

Single sowing cans, arched or flat roof.

  • Single constructions, A bounted houses are usually made from sheets of professional flooring, the framework material is performed from a round profile pipe or a wooden bar. The easiest in assembly and installation of all kinds of canopies.

All about carports from metal products adjacent to the house

  • Arch. When installing this type of extension, most likely, you will need a specialist help, it is important to correctly design and consolidate all components of the canopy. Watching such structures are always very impressive. The cost is much more expensive than the previous type.

All about carports from metal products adjacent to the house

  • Canopy from metal-plane with a flat roof occurs in the southern regions. Conducted by the fact that such an extension is not designed for a large snow load. Perform it from a high wave of a professional sheet, the bias make the most minimal (up to 8 °).

You can find both big, full length of the house and a compact corner canopy. It all depends on the amount of free space on the site and purpose of the future canopy.

All about carports from metal products adjacent to the house

Materials

Experts begin their choice from the supports for a canopy, because they depends on how strong and durable will this structure will be. Metallic supports will serve longer, additionally, they must be covered with high-quality paint. Usually such backups are made from the profile pipe. But many also use wooden supports. To extend their life, you should use an antiseptic for wood. To the finished supports weld (or screw) beams, which will serve as a platform for mounting metal products. From the tools use a welding machine or screwdriver.

With the help of roofing screws (they have a special rubberized washer), metal sheets are placed on the finished incise. First, metal photographs are mounted at the lowest level, the following sheets are stacked with the previous. To secure the profile sheets, only hardware having rubber washers are used, when screwing them, it is impossible to clamp them very much, since the rubber gaskets may be deformed, which will lead in the future to possible leaks.

All metal parts are treated with anti-corrosion tools, in such a way to extend the life of a carport from the profile.

All about carports from metal products adjacent to the house

All about carports from metal products adjacent to the house

All about carports from metal products adjacent to the house

How to make it yourself?

Step-by-step instructions, where it is painted how to choose a place, cook canopy and install the roof, very important for beginners. Experienced people can do without it, but those who do a canopy for the first time must study a lot before entering work.

All about carports from metal products adjacent to the house

Choosing a place

Before proceeding to the installation of a canopy, you should decide on the place where this extension will be placed. Experts recommend to refrain from construction construction in lowland. If there is no other place, you will have to make a storm sewer, which will pull additional money investments. It should also be considered that the canopy must protect against sunlight throughout the day. It is possible for this to change the degree of inclination visor.

The next step is the high-quality hand drawings. The calculation should be made not only on the size of metal structures, but also on the cross section of the profile material. Mostly for frames up to 6-7 meters, the length of 60×60 is chosen in length, if the size exceeds the above length, then the pipe with a cross section of 80×80 is suitable.

All about carports from metal products adjacent to the house

Installation of supports and crates

After a suitable place is selected, on the finished scheme, it is started to install supports. It is extremely important to install them evenly and high quality, otherwise the frame will not last long. To verify the correct position of the construction supports use the level. Next, the racks are concreted and leave for several days to frozen concrete. During this time, they collect or weld the crate. To do this, use a metal profile or profile tube. Apply a wooden bar, but much less often.

The shapper performs an extremely important function. From how correctly this design will be installed, the stability and safety of the total canopy directly depends. If you correctly calculate and mounted, then the roof will be able to transfer even the fierce snowfall and shower. Fully all installation is easy to perform with your own hands, not attracting specialists. The lamp, built on its own, will be able to please a long service life only with a thorough calculation and a qualitative approach to fulfilling all works.

All about carports from metal products adjacent to the house

All about carports from metal products adjacent to the house

If the choice fell on a tree crate, then when choosing boards should pay attention to some factors:

  • Boards and bars should not be wet;
  • The best breeds of wood that are used under the professional flooring are coniferous;
  • In order to avoid damage to fungi and various microorganisms, wood must be treated with antiseptic.

When choosing a profile pipe cladder, the most important thing is its strength. In order to ensure the endurance of all carriers, you should choose a pipe with the most minimal sizes. The optimal parameters of the cross section of such elements are 40×20 mm. Absolutely all metal is treated with anti-corrosion.

All about carports from metal products adjacent to the house

All about carports from metal products adjacent to the house

Roof setting

In order to find out the amount of roofing material, you first need to calculate the entire surface area you should cover. The resulting digit should be increased by 5-7%. The most popular material for canopies recognized professional flooring. This is a corrugated sheet, which is covered with a polymer shell and zinc. It is not afraid of temperature drops, corrosion and rust, undemanding in care, has a variety of color gamut, environmentally friendly and not ignited.

It divides on three main types: carrier, wall and roofing. Experienced masters advise to be used in the construction of frames precisely carrying professional flooring, and not roofing, as it is distinguished by its increased rigidity and is able to withstand heavy loads (for example, snow). The final barcode is the fixation of the selected sheets. For this you will need self-tapping screws. Stop the professional flooring should be very careful not to damage the polymer shell. Taste is performed in one wave.

Masters note that build a canopy from metal products is quite easy. It does not take much time, and in the money plan is the most budget option.

All about carports from metal products adjacent to the house

About how to make a carport of metal products with your own hands, look in the following video.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment