Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Nowadays, the washing machines are present not only in each city house, they are good assistants by housework in villages and villages. But wherever such an aggregate stands, he ever happens a breakdown. The most common of them is the failure of the Tan. Consider how to carry out such a repair, and learn that professionals advise.

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Signs of malfunction

Each breakdown can be determined by some signs. Knowing what “symptoms” can be at a certain malfunction, it is possible to unmistakably understand what the reason lies. Based on the many years of experience in repairing different machines for washing, experts identify 3 main factors pointing to a breakdown of the Tan.

  • The water heating process does not begin, but the washing program does not stop. In certain types of washing machines, a program is provided that performs washing in cold water, so before calling the wizard or start disassembled the typewriter, check which wash mode and the temperature are currently exposed at the moment. If you are still not mistaken with the installation of the program, and the water does not heat up anyway, then we can conclude about the malfunction of the Tan. Some of the old models of washing units when the heating element fails, they begin to turn the drum to infinitely waiting for the necessary water heating. Modern machines can issue a mistake in the work of the Wen before the start of the washing process.
  • Second sign of malfunction – This is the operation of the circuit breaker in the power supply network. Most often it happens after some time after turning on the washing machine at the time when water heating should begin. The reason for such a “behavior” of the protection machine is caused by the circuit of the electrical circuit on the spiral of the heating part.
  • In the third case, the protective shutdown device is triggered through which the unit is connected to the power supply. If this happens when the heating element is turned on, then the TEN has a current leakage on the body. The reason for this is damaged isolation.

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

The listed features cannot be called absolutely accurate, they are still considered indirect, but 100% confirmation can be obtained only after dismantling the device and the name of the heating element by a multimeter.

How to find a breakdown?

After identifying indirect signs, it is necessary to find a breakdown. To explore and perform measurements, it is necessary to partially disassemble the washing machine, having received free access to the electrical part of the heater.

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Not in each case, the absence of water heating is a certificate of breakage of the Tan – contacts could be oxidized, and one of the wires could simply fall off. In this case, it is not necessary to change the heating element, and it is enough to simply clean the contacts and securely attach a plugged wire.

If a runaway inspection did not allow to identify obvious defects on the electrical part of the device for heating, then it is necessary to call it a special device – Multimetom. So that the measurements were correct, it is worth calculating the resistance of a particular Tan. To do this, we will need to know exactly what its power is. Usually it is written on it itself and in the instructions for use. Further calculation is Nestes.

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Suppose that the power of your tan is equal to 2000 W. To find out the impedance, it will take a voltage of 220V to build a square (multiply 220 to 220). As a result, multiplication will turn out the number 48400, now it is necessary to divide it on the power of a particular heating element – 2000 W. The resulting number will be 24.2 Oh. This will be the resistance of a good heater. Such uncomplicated mathematical calculations can be made on the calculator.

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Now it’s time to start the test of the Tan. To begin with, you will need to disconnect all the post. The next step you need to switch the multimeter to the mode that measures the resistance, and select the optimal range of 200 Ohm. Now we will make a measure of the parameter you need by applying the appliance of the device to the connectors of the heating element. Working Ten will show a digit close to the calculated value. If, when measured, the device showed zero – this tells us about the presence of a short circuit on the measured device, and this item requires replacement. When during the measurement, the multimeter showed 1, we can conclude that the measurable component has a break and also needs to be replaced.

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

How to remove?

Repair work with any household appliances begin with shutdown it from the outlet. Next, you can proceed directly to the removal of the heating element itself. It is worth considering that there are such varieties of washing machines, in which Ten is located on the back of the tank, and there are those in the device where the heater is in front (relative to the tank). Consider dismantling options for each of the installation types.

If there is ahead

To remove the heater from the machine with such a design, It will be necessary to perform the following steps:

  • First you need to remove the front panel;
  • We dismantle the hopper for washing powder;
  • Remove the sealing cuff, for this you need to stretch the locking clamp, and fill the seal inward;
  • Now we remove the front panel;
  • Turn off the terminals on the door lock;
  • When everything is unnecessary, you can proceed to dismantling the Tan itself, for which it will be necessary to disable all the wires;
  • We unscrew the locking nut and press the fastening bolt inside;
  • Before pulling out the item, you need to dig a little.

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

After a successful dismantling of the old faulty, the Tan must be cleaned by its landing place from scale and dirt. Only after that it is allowed to safely install a new heating element. Its fixation occurs in reverse order.

If behind

Consider the sequence of tanning with a washing machine in which this part is installed on the rear of the tank. To do this, we need:

  • disable the device from all communications;
  • unscrew the screws on the rear panel and remove it;
  • Now we have received full access to Tan and its wires, they must be turned off;
  • We unscrew the fixation bolt and press it inside;
  • Ten pulls out hard, so it will be necessary to join with a flat screwdriver;
  • After removing the element you need, it makes a good seat;
  • Install a new TEN in your place, and so that the rubber seal can easily come, it can be lubricated it a little soap or dishwashing agent;
  • Connect back all the wiring, and collect the device in reverse order.

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

How to replace and install?

Before you start repairing a washing machine, you need to drain water from it and turn off from the electrical network. Further To start repair work, you need to prepare a set of wrenches, flat and cruciform screwdrivers, pliers or passage.

Before starting the disassembly, it is necessary to understand which side in the design of the washing machine is the heating element. It depends on the characteristics of the device of a particular model of household appliances. When all the unnecessary attachment will be removed, the wizard will see only the rear part of the Tan, on which the power wires and the fixing nut will be fixed. To dismantle the heater, you must disable all the wires and unscrew the nut. Next you need to get an old heater. For this you need:

  • With a screwdriver, push the locking bolt into the inner cavity of the tank,
  • then pushing a tan with a screwdriver and swinging the movements to extract it.

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

Faulty item is best changed to a new. This will allow for a long time to forget about the problems with the Tan, in contrast to its repair.

During the installation of the new part, it is necessary to achieve a dense landing for its place without distortion and rubber sealing chances. If this is not done, water will be reduced from under the gum – there is nothing good.

After mounting, reliable fixation of the new heating element and its connection is not hurry to finally collect a washing machine, And check if a new heater works. To do this, launch the washing at a temperature of 60 degrees, and after 15-20 minutes. Turn the glass of the door. If it is hot – this means that the TEN is working properly, and the problem has been successfully eliminated. Now you can finally collect the car and put it in your place.

Replacement of the Tan in the washing machine: how to repair, the tips of the masters

The algorithm for replacing the heating element is the same for almost all modern brands of washing machines and has minor discrepancies. The difference can only be in the complexity of access. This procedure is simple and does not require special skills, so it can be made independently, without causing specialists.

Tips Masters

        Before starting independent work on replacing the heating element of the washing machine It is advisable to consider several useful tips.

        • Unfortunately, the majority of apartment buildings of the old building and many private houses do not have grounding. This significantly increases the likelihood of getting a blow when the isolation of the Tan. When a similar serious problem is detected, it is necessary to disable the device from the electrical network, after which call the wizards or repair independently.
        • After installing the heating element, it is desirable to check the tightness of the sealing gum. To do this, pour into the hot water tank above the level of the Tan. If water flows from under the gum, it will take a little tighten the nut. In the event that this simple procedure has not occurred, it is necessary to reinstall the TEN. Maybe somewhere on the gum is available.
        • In the inner cavity of the tank, the heating element is fixed with a metal bracket. If the tan did not get into it, he will stand uneven and start baking over the drum during washing. As a result, the heater will quickly fail.
        • To determine which side is the heater in your typewriter, you can use the flashlight and enlighten the drum from the inside. In this way, the wizards are often used when repairing machines. Only for a similar method of determination must have good eyesight.
        • In order not to get confused in the wiring and not guess during the assembly, which wire where it comes from, it is desirable to mark with a marker or take a picture. This method will help save a lot of time on the back assembly.
        • Carefully turn off the wires when disassembling household appliances of such a plan. Should not do too sharp movements and with diligence pull out the necessary parts. In this way, you can apply serious harm to the device.
        • The replacement of the Tan – the occupation is not the most difficult, but it is not necessary to resort to it if you are absolutely nothing we mean in the device of washing machines or you are afraid to make serious mistakes. In such a situation, it is better to call professional craftsmen or visit the service.

        Replacement of the Tan in the washing machine: how to repair, the tips of the masters

        Replacement of the Tan in the washing machine: how to repair, the tips of the masters

        If your equipment is still under warranty, it is impossible to repair it. Because of this, warranty service for your device can end, so do not experiment.

        The visual algorithm for replacing the Tan is further.

        Rate article
        ( No ratings yet )
        Share to friends
        Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
        Add a comment