Mounting of the sink: types of structures and step-by-step instructions

The sink is considered one of the important accessories, without which it is impossible to submit a kitchen and bathroom environment. Thanks to the huge selection of models, these designs are presented in various shapes and colors, so harmoniously fit into any interior of the premises. Although the installation of the shell does not represent a special complexity and is often performed independently, in order to correctly implement the installation, still require certain skills. Therefore, before starting work, it is necessary to explore not only the principles of fastening the sinks, but also know how the mixer is connected, since the slightest inaccuracy in the installation can lead to leakage and other problems.

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

Peculiarities

The sink is a unique type of construction, which in modern life performs both functional and aesthetic properties. Despite the fact that shells are of different sizes and appearance, all of them are combined by one feature – the need for high-quality installation. In order for the accessory beautifully looking in design and reliably served many years, you need to comply with all the rules of installation work, correctly calculate the size and choose the place where it can be supplied. Therefore, at first, the space allotted under the sink is precisely measured, its width can be from 60 to 250 cm. In addition, the installation of the shell depends on the design features of the product, since there are models with a mixer and without it.

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

Before installation, it is also important to decide on the shape of the sink, and it is desirable to make it even at the stage of repair or construction of the room, otherwise “to fit” the product for finished water supply and sewage conclusions will be difficult.

To date, several types of shells are distinguished, for each of which the installation is characterized by its peculiarities.

  • Suspended. Accessory is attached to the wall using brackets, as for the mixer, it can be located both on the product itself and on the wall. Such models exceed the space, but they need to complement a small bed, where all communications usually hide.

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

  • On the pedestal. Mounting the sinks are carried out directly to the wall using brackets, but in contrast to the suspension version of the communication system are hidden under a special design – pedestal. There are accessories with a partial and full pedestal, the only minus is considered to be a limit in height that cannot exceed 80 cm.
  • Built-in. Such sinks are installed in bedside tables and countertops by cutting or mounting to frame. This type of product is characterized by a beautiful design, but they occupy a lot of space, so do not fit for rooms with a small area.

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

In addition, shells are different and manufactured material, which also requires a special approach and installation technology. The most popular are products from porcelain, ceramics and faience, they cost expensive, but have high quality. Found in the market and models from marble, they look respectable, but are complex in installation and care, the material has a porous structure that can collect dirt and dust. Separate attention deserves glass sinks made of heavy-duty raw materials. Their mount should be done carefully not to damage the appearance.

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

For kitchens, stainless metal sinks are usually acquired, they are easy to install, it is inexpensive and durable. The only disadvantage is the instability to abrasive means, besides, they create noise from water. Such sinks are simple and dual form. These models can be embedded in countertops and stands, installation takes at a minimum of time, and it is quite realistic to realize it with your own hands.

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

Set your own hands

The main stage in construction works is the installation of the shell, it provides not only reliable fastening of the structure, but also connecting communications. The aesthetic view of the washbasin and the convenience of its use will depend on the proper implementation of the installation. Therefore, it is first made a dismantling of the old shell, and is preparing a place for a new accessory.

It is also important to determine what height will be placed bowl of washbasin. If the washbasin is suspended too high or low, it will be inconvenient to perform hygiene procedures, as it will have to be leaked or lifted. Therefore, it is necessary to choose such a standard in which all family members will be comfortable.

Mounting of the sink: types of structures and step-by-step instructions

As a fixing system for both kitchen and bathroom, they choose support brackets, they are suitable for any model of shells and securely fix them. Some masters prefer to use anchor elements that firmly fasten the sinks to the walls and much simplifies the installation. In addition to the bowl itself, it is also necessary to install additional details included in its package. It can be countertops, couch or supports, closing communications.

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

Previously, we should think about the placement of the sewage and water supply system. To do this, make up special schemes and calculate the level of drain, which should have a small bias from clean floor. At the same time, the distance between the siphon and pipes is recommended to do the minimum. All protruding installation surfaces need to be hidden in the cabinets or for special racks. Connect communication can only be able to control the bottom valve. You can not forget about the sealing of parts, for this there is a certain procedure for installing gaskets, they should be fixed according to the instructions indicated on the packaging of the shell.

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

In bathroom

When creating a new interior in the bathroom, it is necessary not only to replace the finishing of coatings, but also to install a new sink that would correspond to the size of the room and harmoniously combined with the design. For many, the installation process may seem difficult, in fact it is not so, even a beginner master will easily cope with it. First of all, the room measurements should be made, plan space and determine the appropriate place for a washbasin and a hygiene shower.

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

To install the accessory, you will also need to prepare the following tools:

  • Perforator;
  • A set of drills for working with concrete;
  • a set of screwdrivers and wrench;
  • Dowels, screws;
  • Winding and sealant.

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

Before starting the installation, it is necessary to block water in the system. At the first stage, dismantling the old design. To do this, unscrew the nut on the mixer and disconnect the flexible and hard liner. The ends of the discharged pipes are preferably placed in the container, as water drains may remain in them. Then the crane and siphon are dismantled. Then you can proceed to the immediate installation of the sink. It is worth noting that each model of washbasins is characterized by special installation technology, therefore, depending on the device, work sink is carried out differently for different designs.

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

On the pedestal

The height of the washbasin is selected along the length of the lower leg, after which the fastener of the bowl is made and the siphon with the mixer is fixed. To hang the sink on the wall, use special brackets. Since the plums in this case will be located inside the feet design, then special attention should be paid to the insulation of parts to avoid leakage during operation. Installation of this design is possible only after the end of all types of finishes. First you need to place the places of fasteners, after which you begin to direct installation. For this, the horizontal line is drawn, its height from the floor covering should not exceed the size of the leg and is left to a small distance that is equal to the thickness of the accessory.

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

The brackets are applied to the surface of the wall and holes under the dowel. At the end, the details are attached and the bowl is put, it must be stable. After the washbasin is exhibited in the correct position and fits tightly to the wall, you can connect the drain and mixer.

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

On the end or suspension shelf

In this design, the countertop will perform at the same time the holder and decorative element of the shell. Washbasin can be built into the hole and put on top of the couch, you need to use durable material for a substolete place. Regardless of the selected type of installation, the drain will in any case be hidden under the shelf. To give the sink exquisite view, it is recommended to choose from glass or artificial stone. Externally, the bowl can be different, but it is best to give preference to a round and cubic form.

Mounting of the sink: types of structures and step-by-step instructions

Mounting of the sink: types of structures and step-by-step instructions

For mortise construction

    As a rule, it is chosen for the installation of a cast-iron bowl or steel products, the sink is placed inside the cabinet, it is cut for it. Under such a model, you can put a washing machine. If the layout also provides the installation of the water heater, it should be suspended at a distance that would not prevent free access to the washbasin. It is also important to ensure the safe operation of electrical engineering and carry out the installation of water out. An excellent addition to the design of such shells will be mirrors.

    Mounting of the sink: types of structures and step-by-step instructions

    Mounting of the sink: types of structures and step-by-step instructions

    In the kitchen set

    When the sink replacement question arises in the kitchen, then mainly choose a mortise or overhead washing. Before starting installation work, it is necessary to choose the right place to be installed, as it is impossible to place the sink next to the stove and the working area. That is, the sink must be installed in such a way that it is used for dirty work and serving. Good and convenient is considered an angular version of the shell.Cutting sinks are embedded directly into the kitchen set, which is usually made of chipboard or wood. They are manufactured from various materials. The cheapest view is the sinks of stainless steel, there are also models with a ceramic shell.

    Mounting of the sink: types of structures and step-by-step instructions

    Mounting of the sink: types of structures and step-by-step instructions

    For mounting works of such a design, you will need:

    • electric drill;
    • electrolovik;
    • drill;
    • set of screwdrivers;
    • ruler;
    • Malyary Scotch;
    • silicone sealant;
    • Passatii.

    Mounting of the sink: types of structures and step-by-step instructions

    Standard equipment of modern shells contains not only fastening elements, but also templates from cardboard that simplify the installation process.

    Installation is made step by step according to the instructions.

    • At the first stage, a hole is prepared for the sink. To do this in the tabletop make cut. By the template on the tabletop, the selected place and the cardboard clipping is temporarily fixed by painting scotch. It is worth paying attention to the fact that the bottom of the shell does not come into contact with the inner sides of the cabinet. After that, the pattern is spinning the contour, you need to retreat 1 from it.5 cm and apply the second outline by which the hole is cut.

    Mounting of the sink: types of structures and step-by-step instructions

    • At the second stage, with the help of an electric bike make opening. Doing work does not rush, as it is impossible to go beyond the boundaries of the contour. The resulting hole in the spike places is carefully cleaned by sandpaper.
    • The next stage will be the processing of the tabletop sealant. When the sealant is completely drying, checked how the crane and hoses are installed, because after mounting the washing, change the location of the communications will be difficult.
    • The completion of the work is the fixation of the sink itself. It is inserted into the hole, tightly pressed around the edges and all educated empties are additionally filled with sealant. Bottom washing is attracted with special fasteners. At the same time, initially pull up the angles diagonally, then fix the middle.

    Mounting of the sink: types of structures and step-by-step instructions

    Mounting of the sink: types of structures and step-by-step instructions

    • The installed sink will only be connected to the hot and cold water system. Between the crane and the nut, they put a rubber gasket and join water supply hoses. Sink should also be connected to sewage. To do this, the siphon is inserted and attached. For the kitchen, it is best to use a siphon S-shaped form, it is much more practical and is not as fast as bottled siphons.
    • Then tube starts into the sewer. It is important to draw attention to the fact that the diameter of the pipe corresponds to the size of the pipe coming from the siphon. If there are minor discrepancies, they can be corrected using a special sealing cuff, which acts as an adapter. If the work is performed correctly, the car wash will serve reliably long time, and the connections will not flow.

    Mounting of the sink: types of structures and step-by-step instructions

    Mounting of the sink: types of structures and step-by-step instructions

    Mounting errors

    Many apartment owners prefer to install shells with their own hands, since this process is not considered difficult and saving funds on hiring plumbers.

    With independent installation, it is important to adhere to all technologies and prevent some errors.

    • All holes under fastenings need to be done exactly in size of a new washbasin. You can not re-insert dowels in old holes.

    Mounting of the sink: types of structures and step-by-step instructions

    • When installing bowls, excessive power movements should be avoided, as they can lead to the formation of cracks and fragments on the surface. This also applies to connecting the water supply and drain system at which it is possible to damage the connecting thread.
    • Siphon in the “Tulip” models is embedded before attaching a bowl on the wall.
    • Before fixing the pedestal of the sink, it should be carefully testing the flattering floor covering. In the event that there are discrepancies in the levels, the design will be unstable and can flow.

    Mounting of the sink: types of structures and step-by-step instructions

    Reviews

    Today, the plumbing market is represented by a chic assortment of shells from foreign and domestic manufacturers. Well done well and received positive reviews Trading stamps Roca, Sanita, Cersanit, Vitra and “Aquaton”. They produce not only metallic, but also marble, concrete products that are resistant to mechanical damage and easy to install. In addition, modern shells are characterized by a protective surface, due to which they are not afraid of the effects of acids, abrasive solutions and cleaning products.

    Mounting of the sink: types of structures and step-by-step instructions

    Mounting of the sink: types of structures and step-by-step instructions

    And all products are manufactured by individual orders and can have different sizes and non-standard forms. As a rule, foreign manufacturers produce a shell with a length of at least 150 cm, there are also models up to 260 cm long, they are popular in the interior, as they fit beautifully into the modern style.

    Successful examples and options

    The bathroom takes a special place in the interior of housing, as it is considered a place for privacy, where you can not only take a shower, but also to perform a number of cosmetic procedures. Therefore, it is important to provide all the details in its atmosphere, ranging from the finishing of surfaces and ending with the installation of plumbing. Special place in the design of the bathroom occupy shells. For modern decor, it is recommended to choose the models of the shells, which are called “Tulip”. They are easy to install, easy to use and perfectly harmonize with decor elements in any style.

    Mounting of the sink: types of structures and step-by-step instructions

    Mounting of the sink: types of structures and step-by-step instructions

    A distinctive feature of this type of shell is that their liner to sewerage and the mixer is hidden in special ceramic details “foot”. Therefore, the interior of the room acquires elegance. Due to the fact that the “tulips” are produced in various colors and size, they can be placed in the bathrooms, regardless of the size of the space. A good option is such shells for a combined bathroom, but in this case their “foot” should freely rely on the floor.

    A wonderful lilying sink. It looks outwardly resembles a “tulip”, but is installed without additional support. Such a model is best to choose for those rooms in which the pipes are laid down and are an obstacle to the installation of Tumb. Suitable “Waterwear” and for a bathroom, where the washing machine is placed. The technique is installed under the sink and, thus, save space in the room.

    Mounting of the sink: types of structures and step-by-step instructions

    Mounting of the sink: types of structures and step-by-step instructions

    How to install a washbasin with a table with your own hands, is shown in the following video.

    Rate article
    ( No ratings yet )
    Share to friends
    Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
    Add a comment