Installing the Alcaplast suspended toilet

Alcaplast suspended toilets have many advantages: they save free space, look original, besides, it is a great option for a small bath. However, the installation of installation of this plumbing should be carried out according to the established scheme – the success and duration of operation of equipment depends on this.

Installing the Alcaplast suspended toilet

Installing the Alcaplast suspended toilet

Features of the Czech Installation System

The most economical and affordable option is the installation of Alcaplast. Thanks to its compactness, it is able to organically fit into any small area. This is a frame system that is placed on the foundation or sex, after which it is securely attached to the base and wall.

Due to the adjustment of the height with the legs, the design can be fixed anywhere (Provided and corner option). In addition, it corresponds to it, in fact, all modern model of toilet bowls. Plumbing in this case is recommended next to the bearing wall. Paul must have a screed thickness 200 mm.

Installing the Alcaplast suspended toilet

Installing the Alcaplast suspended toilet

The main advantages of products from the Czech Republic:

  • saving places in the toilet room;
  • hygienicity (thanks to the convenience of cleaning under the hinged model);
  • Installation at an optimal height;
  • High quality details;
  • Pleasant appearance (due to the fact that the communications are hidden).

Installing the Alcaplast suspended toilet

Installing the Alcaplast suspended toilet

From minuses allocate: the need to dismantle when replacing, a rather complicated installation process.

By purchasing the products of this manufacturer, there is always the possibility of connecting additional plumbing: near the toilet can be installed a bidet or hygienic shower with a mixer, because the design provides adapters to connect other sources of water. If there is a connector on the frame on the frame, it allows you to install an electronic control bidet.

Installing the Alcaplast suspended toilet

This installation is standard, and this means its versatility. The undoubted advantage is also considered a long life – 15 years. Reviews of real consumers prove that by following instructions, installation can be carried out independently – even alone.

Installing the Alcaplast suspended toilet

Installing the Alcaplast suspended toilet

Set of Alcaplast 5 in 1

Alcaplast installation is a budgetary, lightweight and compact model, which can be purchased with the toilet.

Complete from the manufacturer contains the following items:

  • Installation system;
  • Plasterboard plates for sound insulation;
  • elegant and hygienic console toilet without rim;
  • Seat with an elevator device providing smooth lowering;
  • White button.

Installing the Alcaplast suspended toilet

The system is complemented by a two-stage drain mode (large and small). The product is valid until 5 years of use.

Other Alca products, for example, A100 / 1000 Alcamodul, are produced with the complete lack of mounts to the floor. In such options, all loads – both structures and a person – fall on the wall, so preferable brickwork or partition thickness with a thickness of at least 200 mm.

Installing the Alcaplast suspended toilet

Instructions for installing the installation of suspended toilet

In the process of installation, you will need such tools as the level, construction knife, the keys are precipitated and for a threaded connection, measuring tape.

Elements of structures should also be prepared for work:

  • frame installation;
  • toilet;
  • pipes of different quantities;
  • Double Washed Key;
  • Mounting studs.

Installing the Alcaplast suspended toilet

Installing the Alcaplast suspended toilet

Installing the Alcaplast suspended toilet

All work is carried out by the established scheme.

  • First you need to form a niche in which the frame will be placed. It is done in the bearing wall and provides for a load of up to 400 kg. Niche sizes – 1000×600 mm, the depth can vary from 150 to 200 mm.
  • In the second stage, the location of the hidden system is diveged. The pipe with a diameter of 100 mm is laid as close as possible to the floor under the right slope. It is put on its horizontal part of steel oblique. Connection point should be located at a distance of 250 mm from the center of the niche.
  • Next, mounted a frame by fixing her legs on the floor, it is fixed to the wall using brackets. It is extremely important to check the flatness of the design layout with the level, since the skews can affect the operation of the internal device, and this will lead to failures in the operation of the system and breakdowns.

Installing the Alcaplast suspended toilet

Installing the Alcaplast suspended toilet

  • It is advisable to draw a legs with cement mortar with a layer of 15-20 cm for stability. In order to hang out the plumbing, special holes are provided in the lower construction department. Between them and the surface of the floor are withstanding the distance 400 mm. Through this perforation, mounting needles are inserted and fixed in the wall with nuts – the bowl of the toilet is placed on them.
  • Lastly, it is connected to the sewer pipes. Special discharge in the installation system is connected to communication with one side, and the other is firmly fixed to the frame, for which the threaded connection and sealing gaskets are used to avoid leakage. The tank is also recommended to bring polypropylene or copper pipes that are much more practical and more durable than flexible hoses.

Installing the Alcaplast suspended toilet

Installing the Alcaplast suspended toilet

After that, tests for the performance of the system and possible leaks. It is necessary to open a crane that is inside the barrel, and as it is filling to identify the presence or absence of problems. If the errors are not detected, the installation button is installed: pneumatic or mechanical. The pneumatic key is attached using special tubes. The mechanical type model is installed after mounting the pins and settings for their position. Both operations do not cause special difficulties, since there is a hole and corresponding connections.

Installing the Alcaplast suspended toilet

Installing the Alcaplast suspended toilet

The advantage of Czech products is that a variety of systems are provided: for fixing to the floor, on bearing and non-vacant walls, as well as models with the possibility of ventilation, for the elderly and disabled. In a very affordable cost, you can purchase a kit that includes installation along with high, European quality plumbing.

Installing the Alcaplast suspended toilet

Installing the Alcaplast suspended toilet

On how to install the installation for the suspension toilet, see the following video.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment