How to close the gap between the bathroom and the wall?

When the main repair in the bathroom is completed: the tile is pasted, the bath in place, then the question arises how to close the unsightly gap between the wall and the bathroom. Sealing is very important, because it prolongs the life of sanitary products and prevents moisture penetration under the bathroom, the appearance of mold and tile destruction.

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

Peculiarities

The gap between the wall and the bathroom occurs due to the inconsistency of the size of the bath and the room, the irregularities of the walls or due to the unfinished corners. The size of the clearance depends on the specific situation.

At the moment, there are already quite many options for solving this problem, We will talk about them. How to close large slots (more than 5 cm), small gaps, the best ways to resolve these situations depending on the input conditions – all this we will look at the article.

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

Modern methods of sealing joints

Particular methods for sealing the gap between the bathroom and the wall can be distinguished:

  • using cement mortar;
  • using mounting foam;
  • Sealing silicone sealant;
  • Plinth of plastic or tile;
  • Sticker border ribbon or corner.

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

The decision to use each method should be solved depending on the totality of many factors, such as:

  • slit size;
  • bath shape;
  • Material wall.

How to close the gap between the bathroom and the wall?

By choosing the material correctly, work on sealing will be simple, and the result is long-term.

Sealing of mounting foam

The use of fine foam in the sealing of the gap between the bathroom and the wall is a progressive and convenient method that can be used even at large size of the gap, since this foam has a property to expand greatly.

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

When choosing a foam, it is worth paying attention to its moisture resistance, because this is the main criterion when choosing building materials for working in wet rooms. Optimal is one-component polyurethane composition.

Sequential sealing of the mounting foam looks like this:

  • cleansing surfaces from pollution and degreasing with specialized means;
  • Careful drying of surfaces;
  • Preparation of a building pistol (if this implies the foam you selected);
  • Careful distribution of foam, filling all the slots (before use the cylinder must be shaken);
  • Fast cleaning of extra foam (after drying it will be extremely problematic);
  • the dissolution and drying (on average – up to 8 hours);
  • Next – exactly cut foam and disguise the joint using a comfortable material – ceramic tiles or plastic corner.

How to close the gap between the bathroom and the wall?

IMPORTANT: When working with mounting foam, it is better to protect your hands from its skin getting.

Using border ribbon

Bordry tape is a plastic white tape produced in rolls. On the one hand, the ribbon is a smooth surface covered with antifungal agents and not letting a moisture, and on the other hand, the tape is represented by a sticky layer.

As a rule, the border tape is used not as an independent means of sealing joints, And as an additional decorative coating after filling the slit by mounting foam or cement-sandy solution.

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

When choosing a tape worth knowing the width of the gap, which you want to close and choose, at least 2 times wider (as one edge of the ribbon falls on the wall, and the second – on the gap and the edge of the bath).

The ribbon fastening is carried out in this way:

  • The working surface is cleared and carefully sucked;
  • For greater strengthening, the tapes are often advised to embroider with adhesive compositions (for example, liquid nails) or use additionally silicone sealant;
  • Rivne ribbon ribbonly sticks: so that one half lies onto the wall, and the second half is on the bath;
  • For reliability, all the place of joints are wicked by sealant;
  • It is also necessary to prevent moisture from entering the side during the day to dry.

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

Border ribbon – the short-lived method of sealing joints, it is worth remembering. It is easy to care, but even with careful use, it is difficult to extend its life: it is quite quickly dug away and loses an attractive appearance.

How to close the gap between the bathroom and the wall?

The use of cement solution

Using cement-sandy solution, you need to understand that this method is very economical, but not suitable for the gaps more than 4 cm wide, as it will simply be held at the greater slick.

With a larger size of the gap, you can use special support-supports, for example, a wooden slaughter that can serve as a solution for a solution.

Sealing with cement mortar is carried out as follows:

  • Preparation of the surface: the wall should be treated with primer – this is done to increase the clutch of the solution with the wall material;
  • Preparation of directly the solution itself is done in accordance with the instructions on the package;
  • impregnation of the vehicle with a solution and laying it into the space between the bathroom and the wall;
  • after drying the vehicle – applying a solution that should be thoroughly aligned with a spatula;
  • waiting for solidification;
  • Painting or shelter with a plastic or tiled decor with cement mortar.

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

The main disadvantage of such a method of sealing is the inelasticity of the frozen solution. Accordingly, with the slightest oscillations, which can be susceptible to the bath, the solution can crack and stop performing its function.

Sealing slit silicone sealant

With the help of silicone sealants, you can provide high-quality sealing of the gap between the bathroom and the wall, but only with very small size of the gap width (up to 5 mm).

Sanitary sealants for bathrooms are suitable for this work: They have sufficient elasticity, antibacterial and fungicidal (antifungal) additives, resistant to temperature and humidity drops.

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

Another indisputable plus of silicone sealants is an increased degree of adhesion: any glossy coating does not require special preparation for high-quality consolidation.

Silicons in the tube are usually white or transparent.

The sequence of actions in the case of using silicone sealant for the joint is:

  • degreasing and drying the surface;
  • For the convenience of the distribution of silicone sealant, it is better to use a building (plunger) pistol;
  • The spout of the cylinder tube is cut depending on the seam thickness;
  • Silicone is applied evenly along the entire length of the slit;
  • wetting finger in soapy water, you need to distribute the sealant with a smooth layer;
  • It is recommended to apply several layers of silicone: the first layers should be deeper into the seam for high-quality sealing;
  • We are waiting for drying.

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

Thus, it can be seen that eliminating unwanted gaps in the bathroom with silicone sealants is easy. With this work, you can cope with your own hands without attracting specialists.

Other possible options

All the basic methods of seamy sealing We looked higher, now let’s talk about less popular or specific means for eliminating slots.

  • Plinths and borders. Plinths and borders from polymeric materials are quite common due to their cheapness and aesthetic appeal. What you should know about this method – this is what the finished adhesive basics, often applied by the manufacturer on the plinth, are not suitable for quality work. Therefore, by taking the installation of plastic plinths and borders, it is worth thinking about the additional acquisition of waterproof quick-drying glue. Plastic plinths hide slots up to 3 cm wide.

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

Procedure for the installation of plastic sealing elements:

  • cleansing the gap from dust and dirt, thorough drying;
  • measurement of the sides of the bath for proper trimming of the plinth;
  • In the fields of the joints of the plinth, it is necessary to bring trimming at an angle of 45 degrees;
  • We try on a cropped curb, and if everything coincides, we applied on the edges of the bath and walls (above the alleged side) greasy tape for protection against glue;
  • We apply glue to the gap, act in accordance with the instructions on the package with the adhesive composition;
  • Install the plinth and carefully pressed, fixing for a few minutes;
  • Remove the painting tape;
  • Sealing the silicone composition of the base of the plinth with a wall and bathroom.

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

  • Installation of ceramic border. The most common material for lining walls and floor in the bathrooms – tile. That is why the use of ceramic borders as far as possible will fit into the design of such a bathroom. A large selection of tiled borders allows you to make a borger with an attractive element of the interior, and not just a need is hidden a gap.

In the case of working with tiled borders, it should be particularly neat due to the fact that the material is fragile. It is worth taking care and take a couple of elements more than it is necessary that in the event of unforeseen circumstances it could be replaced by spoiled.

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

The procedure will be as follows:

  • Clean the working surfaces of the bath and wall;
  • Select the slit around the perimeter using a mounting foam or cement-sand solution;
  • Using special glue for a tile, lay ceramic elements, if necessary, cut curls of borders;
  • Lose all seams with suitable color or use silicone sealant.

How to close the gap between the bathroom and the wall?

Large clearances

Sometimes these conditions are created that the bath is smaller than the size of the room for 7-8 centimeters. Such cases require a special approach and combining the methods of sealing.

Most often, a cement mortar with a lining for its fixation is used for the draft seal. By itself, the compactor in the form of a concrete surface is impractical and inestretical, as it can often cause allergic reactions and contributes to the accumulation of dust.

How to close the gap between the bathroom and the wall?

Consider several methods for solving this problem:

  • The easiest and most economical way to finish concrete coating is painting acrylic or enamel paint;
  • The use of plastic panels is also an economical solution;
  • You can use the same material as on the walls, for example, tile (this solution will be harmoniously fit into the overall picture);

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

All these methods can also be combined with curb ribbon or plastic curbs to prevent water accumulation in the corner of the joint.

A fairly interesting way to close the large clearance is the design of non-border, but a functional shelf. This method is good and in terms of functionality, and from the point of view of aesthetic appeal.

In this case, the metal profile frame is mounted, on top it is necessarily facing waterproof materials (tile in this case will be the most optimal choice).

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

Useful recommendations on installation

There are several basic moments that predetermine the success of the outcome of the sealing of joints in the bathroom.

The specifics of the nuances of the work performed depends on the selected material for seeling the seam, so we consider each method again with the refinement of the installation recommendations.

  • Conducting work with silicone sealant. When working with silicone sealant, it is worth using a painting ribbon to exclude the insertion of excess composition on the adjacent surfaces, since silicone is sufficiently removed enough. Between the sealing of the bathroom and the first use should take at least a day.
  • Conducting work with mounting foam. As well as when working with silicone, it is worth sticking the neighboring surfaces with painting scotch, avoiding foam from entering them. After work, the surplus foam is cut with a knife. To increase the waterproof, the foam is applied in layers, which reduces its porosity.

How to close the gap between the bathroom and the wall?

How to close the gap between the bathroom and the wall?

  • Work with cement-sandy mixture. This is the longest on the execution and labor method of sealing. At the same time, it is rather durable with proper execution. When applying the solution you need to be careful not to make the nearby surfaces of the bath and walls, it uses a small spatula for this. Cement-sandy solution – the longest drying material from all we considered. Decorative elements can only be mounted after complete drying.
  • The use of cement mortar or mounting foam is inappropriate in cases with a steel or acrylic bathroom, as the acrylic bath is too mobile, and the steel – changes in size when temperatures change. Therefore, these methods are best suited for cast iron baths.

How to close the gap between the bathroom and the wall?

Everyone understands how important it is to properly carry out the sealing of the gap between the bathroom and the wall, because it is your safety, leakage guarantee, protection against fungus and mold.

Information on how to remove the gaps and how to install hermetically and durable we were outlined in this review. Following simple recommendations, you can easily pick up the appropriate method and will be long satisfied with the result.

More information on how to close the gap between the wall and the bathroom, you can learn from the video below.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment