Faults of the washing machine LG and the ways to eliminate them

Household appliances LG has proven itself as pretty high quality. This brand implements decent washing machines that are characterized by reliability and functionality. However, like any other unit, with time, the technique for washing may fail for a variety of reasons.

Device Schemes with Standard and Direct Drive

According to statistics, LG washing machines on 5, 6 kg begin to break after the 5th year of operation. In order to correctly identify the cause of the breakdown, you should know the scheme of the unit of the unit. The following elements are present in the standard equipment of the technique:

  • pulley;
  • drum;
  • belt;
  • motor.

    Direct drive aggregates are characterized by the presence of the following elements:

    • drum;
    • Direct drive motor.

    Household appliances work due to drum rotation using a drive belt. The second version of the scheme provides for the rotation of the engine directly drum.

      This type of engine has a shield that is regularly wearing. During problems, it is easily determined that the reason for the breakdown is hidden in the functionality of the motor, and not the details that fit to it.

      Types of breakdowns and their elimination

      Causes of the malfunction of the washing machine may have a different basis. Often to breakdowns leads inaccurate use of technology, washing without compliance with the instruction rules. Users may notice that the unit has no heating, sounded sound when pluming, the car is buzzing and does not gain momentum, hosts, any button does not work or erase badly. In these situations, you can try to disassemble and clean the design on your own or using professionals. However, before repairing it is necessary to find out why the technique does not hold the valve, creaks, shakes, jumps, long presses, whistles, the touch panel does not select the program, only after which it starts to the troubleshooting process.

      Does not warm water when washing

      In the case when there is no water heating during washing, you need to think about the reason for the problem. These moments can lead to this situation.

      1. The emergence of a failure in the operation of the sensor, which keeps track of the water level or temperature regime.
      2. Damaged wires that lead to Tan.
      3. Broken heating element.
      4. Broken control module node.

      Each can cause the water to be not heated when washing linen.

      Also, this situation often gives the clogging of the water level sensor tube, the overgrown wires, the presence of scale on the agent, permanent interruptions in electricity, as well as marriage of equipment parts. After the malfunction is revealed, you can adjust it to it:

      • clean or change the pipes of water sensors;
      • carry out a replacement, insulation of wires;
      • eliminate scale from the heating element;
      • change a tan or a thermal sensor;
      • to repair the control module.

      Noise, grinding, beating, knock – all this can weigh the owner of the washing machine LG. Often the technique rattles due to flaws in its design. Also, the following reasons may also lead to noise and scratch:

      • finding a car on an uneven surface;
      • use with not fully circulated bolts;
      • the presence of a foreign object in the tank, which leads to the jamming of the drum;
      • deformed or destroyed bearings;
      • destruction or damage to the counterweight;
      • damage shock absorber, springs;
      • Impropiness of the laundry inside the drum, namely its insufficient or excessive amount.

      Noise at annealing

      It is worth dealing with an independent elimination of the problem only after finding out the cause of noise.

        The main events that will help to establish a silent spin of the machine can be called the following:

        • liquidation of a foreign subject with a tank;
        • replace faulty bearings;
        • cleaning fasteners of the inner tank;
        • replacement of fasteners, tightening nuts, ensuring the tightness of the shaft;
        • Tightening samorezov.

        Strong vibration

        Washing machine LG, which vibrates especially in the process of pressed or when ringed, has some faults. Ignoring this problem can lead to more serious assistant problems. Strong vibration of technology may occur due to non-removed transport bolts, improper installation, linen imbalance, as well as excessive load. If the owner of the Washing Machine LG is not able to take it into a service center, then you can try to eliminate the problem yourself. To do this, you can spend the following events:

        • tighten fastenings;
        • control the amount of laundry when washing;
        • uniformly load things;
        • Correct the stability of the legs;
        • Rinse the troubled plum hose.

        Water does not come

        The problem at which there is a failure in supplying liquid to the washing technique is the most common, the owners of the LG machines sometimes face. Most often this problem occurs in case of improper operation of the aggregate. In the case when the machine gives a signal of a disadvantage of fluid, the owner is worth checking the quality of water pressure. If it is weak, it is better to postpone the procedure.

        The second reason for the lack of normal fluid supply to the technique is a scored drain hose or filter. It is also worth checking if the hatch lock arises after the closure of the door doors.

        Water can deal with problems in the drum also because of the broken valve, the press capacity fault, the board failure, the programmer dysfunction.

        To resume the supply of fluid into the machine, it is worth disconnecting the hose from the unit, examining filters and nozzles. In the case when the hatch does not close to the end, it is worth pulling fastening or change the loops. To check the functionality of the press service, fastening bolts unsubscribed by removing the wire, hose. The scored hose is washed, and the dirty contacts of the press space clean.

        Does not spin drum

        Quite often, the activity of the washing machine is broken after the unit is turned on, and as a result, the filled tank with water does not function. The drum does not rotate for some reason.

        • From the transmission pulleys flew the belt. This situation does not happen without reason. Bringing wear can cause it, excessive shaking of the unit at the time of high revolutions during annealing. Also the belt flies due to broken shock absorbers.

        • Broomed the engine or its component. After a period of time on the engine, the details of the brushes can be labeled. At the same time, the electric current is not transmitted to the gross collector, and the engine start does not occur. If a broken tachogenerator is broken, then the characteristic squeak will be heard when working, which is constantly increasing.

        • Uploaded too much linen. This reason quite often leads to damages of machine guns. The hostess must remember that it is not worth putting a lot of things into the typewriter, as this not only can lead to a breakdown of the unit, but also affects the quality of washing. So that the car worked for a long time, it is worth loading exclusively to a permissible mass.

        • Broken electronic module. This unit can stop functioning in the case of electricity surges or moisture from the wiring. To avoid trouble, experts recommend to wash indoors, which is well ventilated. At the end of the work, the unit is worth off from the network.

        So that the tank of the washing machine began to function again, it is primarily to remove a foreign object from the tank. After that, it is worth a replacement of bearings and glands, if they need it.

          If the drive belt flew, then it should be returned to the place, in the case of its wear, it will be necessary to replace. In the process of functioning of the washing machine, brushes can be shorted, so they should be changed.

          Does not work the castle

          Often the hostess complain about the presence of difficulties during the closure of the washing machine. In some cases, it is not able to slam down. In another situation, electrical blocking is not carried out. As a rule, the cause of this situation is the defect that appeared during mechanical exposure. Blocking problems – this is the consequence of the electoral formation machine.

          In the first case, you can handle the problem with the problem, using a screwdriver. So that the door is closed, it is worth a replacement of worn gum. If the problem is related to the disruption of the electroblock, then in this case it is better to seek help from specialists.

          Knocks out automatic when turned on

          If it knocks out the machine when the washing machine is turned on, then This may indicate such moments:

          • Household appliances are broken;
          • Problems with wiring.

          First of all, the owner is worth checking the correct selection of all protective devices of the electrical network.

            It is not necessary to bypass the correspondence of cable cross sections, as well as machine guns. It is possible to solve the problem by replacing the cord or fork, if there is a need.

            Freezes

            Thanks to the automation of washing, LG washing machines made household owners much easier. Sometimes during operation, the aggregates freeze, cease to work and do not respond to pressing buttons. This type of problem may occur for the following reasons.

            1. Overload technology. If the machine depended immediately after it was turned on, it should be turned off. The hostess is then draining the water and take out a piece of linen from the drum. After these manipulations, you can enable the unit with the desired washing mode.
            2. Incorrect mode. The problem can be eliminated quite simply by installing the correct washing mode.
            3. Slide of the supply system, liquid removal. Cleaning the filter will help solve this unpleasant situation.

            Also, washing machines are hung due to engine malfunction, tan, sensors, electronic control module, UBL, plum pump. If the reason for the freelance of technology is any of the above, then for help should appeal to professionals.

            Other malfunctions

            LG washing machine hostess collide with the situation when water does not merge from it. Sometimes during washing the linen, the machine does not switch to the next stage, as a result of which there is no drainage of waste fluid. In this case, an error is displayed on the screen, so you need to constantly pay attention to the display. The reason for this situation can be the poor functioning of the drain pump, the clog of filter, hoses, nozzles. In this case, you need to engage in self-cleaning clogged parts.

            In the case when the unit does not start work after pressing the button, it is not worth disassembling it. First of all it is worth checking if there is a power outlet.

            If it is present, then you need to carefully examine the cord for defects, fesoms, cliffs. Another reason for the unpleasant situation may be a failure of a network filter, which is worth checking and change if necessary. Also, you should not bypass the health of the control unit. Only specialists can repaired.

            Operating tips

            LG washing machine breakage can be prevented if used according to the instructions, correctly choosing modes, programs. Better if this type of technology will install a specialist. Exploiting equipment, it is worth following such rules:

            • carry out quality control of water;
            • Always check the electrical dispersion on the network;
            • If interruptions arise, the unit is worth disconnecting;
            • loading the car stands to the maximum permissible level;
            • Were lingerie only with high-quality means;
            • pull out small items from the pockets;
            • regularly clean equipment filter.

              The implementation of the above uncomplicated rules will help avoid faults of household washing machinery LG. If the machine breaks, an error will be displayed on the screen, then it can be used to eliminate your own or contact professionals. The main thing is to gelatically use the washing machine, do not ignore the manufacturer’s recommendations and to eliminate any problems in time.

              About LG Washing Machine Errors – Le, UE, CE See More.

              Rate the article
              ( No ratings yet )
              Add comments

              ;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: