Corner shower cabins with pallet: selection features

Under the shower corner without roof, a fence for a bathroom, made of glass or plastic panels. They are installed with their own hands to the walls of the bathroom, but some models are attached directly to the floor. Many shower corners are equipped with a pallet, thanks to which the water will flock into the drain, and not spread all over the room, turning the bathroom into the pool. The advantage of these products is their concise design and relatively low cost.

Pros and cons design

First consider the main advantages of this product. They will determine whether a shower corner is suitable with a pallet under your specific requirements:

  • Compactity. Two walls of the bathroom in this case protrude in the form of walls created by the cabin. To visually separate the cabin, you can use a pair of doors or a curtain.
  • Attractive design. There are various sizes of cabin, distinguished by concise appearance. The range is wide enough, while the product will look beautiful in any interior.
  • Availability. The price of shower cabins with a pallet attracts many. You will not need to pay a large amount for several walls and pallet. It must be borne in mind that consumables are relatively cheap.
  • Diversity. Today there are a wide range of pallets and walls with various decorative elements. Similar diversity allows you to implement all sorts of design ideas. Walls can be made of glass, plastic, have a glossy or matte surface.

  • Practicality. Take a shower in such booths very convenient. There are products of various sizes, so you can choose the one in which you will be most comfortable as possible.
  • Adapted under children and animals. Inside the corners with the palumn you can easily bathe children and animals. Thanks to special sides, you can gain water in the shower cabin, transforming a small bathtub. This quantity will be enough to pay a child or a pet.
  • Reducing water costs. Many believe that after establishing shower cabins, water consumption is significantly reduced. You can make sure that you can independently compare your previous and new costs.

In addition to many advantages, this product has its drawbacks. You need to pay attention to them:

  • Opening your choice on glass walls, you will definitely come across their main problem – the formation of sublists, the appearance of divorces, stains from detergents, shampoos and touches. If the design under consideration does not allow proper care, then its aesthetic beauty will be broken.
  • When the design with a pallet having a rectangular shape is installed in a small bathroom, it can deliver a certain discomfort, as you will probably hit her sharp corners. It is dangerous for both adults and children. In addition, stopping your choice on a rectangular corner pallet, you use a large area.
  • The most popular are compact shower angular cabins with a pallet, but this option is not very suitable for overall people. They will just experience discomfort in such a small space.
  • Pallets are not able to become a replacement of the bath. If you are already accustomed to enjoy in a full bath with water, the shower cabin will not be able to become its replacement.

Difference Corner from Cabin

Using the corners, you can save the created design of the room in the bathroom, as they are mostly equipped with transparent walls, so wonderfully merge with the exist. Shower cabins have their own unique design and shape, so they need to be selected individually under the interior of the room.

Cabins have an isolated design and can be installed in any part of the bathroom. The situation with the corners is a bit more complicated, since in this case there is direct contact with the walls of the room, while it is required to protect the indoor and interior items from moisture.

Corners are characterized by a simple design, so install them and remove them yourself without attracting professional workers.

Nevertheless, the functionality of the corners is a bit inferior to shower cabins. Cabins must be mounted exclusively by experts, because they differ quite complex assembly. In this case, the functionality of these products is at a high level.


Today, manufacturers offer customers various options for performing angular shower with pallet, which differ from each other. The walls of the corners mainly consist of glass or plastic, so we will consider the most popular materials for creating pallets.

  • Cast iron – The most common material for the manufacture of shower cabins with low pallet. It is characterized by high strength and reliability. The pallet from this material is distinguished by a long operational period, since it is not amenable to deformation. As a lack, there is a relatively large weight of the material, which creates certain difficulties in transportation and installation of structures. Also, the cast-iron surface when touched is quite cold, and under the pressure of water is created excessive noise.
  • Steel It is characterized by a slight weight, and the cost of products from this material is relatively low. The presence of a thick layer of the enamel coating reduces the unwanted sounds of water pressure when contact with the surface. The pallet warms up quickly and serves a little longer cast iron models.
  • Acrylic is today a fairly popular material that can be purchased at a reasonable price. Pallets from acrylic are characterized by smoothness and pleasant to the touch. At the same time, the similar products are very easy to care for. Pallet manufacturers from acrylic produce various models that differ in shape and variations.

  • Ceramics – excellent material for use in the bathroom. Despite the massiveness of pallets from this material, they differ in strength and hygienic qualities. Here it is necessarily a relief surface, due to which the risk of slipping in the angular shower is reduced. The bowl becomes more secure in operation. Manufacturers offer ceramic pallets of various colors. The disadvantage for such products is a vulnerability to strong mechanical shocks and chipping.
  • Kvaril, which implies a combination of quartz and acrylic. This material not so long ago appeared on the market, but is actively used for the production of wear-resistant shower pallets.
  • A rock Different high costs, like many natural materials. Characterized by a pioneering microtexture, which is pleasant to the touch.

Dimensions and shapes of pallets

There are various forms of pallets that may be:

  • rounded;
  • curvilinear;
  • quarter of the circle;
  • polygonal;
  • square or rectangular with the average size and deep;
  • Made asymmetric;
  • trapezium.

Stop your choice on one or another form of the pallet, based on personal preferences, wishes and design ideas. It is not recommended to take models with sharp angles, which you can hit.

In this case, it is necessary to take into account that square and rectangular cabins (90 90 and 90 per 80 cm), take a lot of space, unlike rounded and round models. Based on this, acquire rectangular and square angular systems inexpedient for small bathrooms.

There is a wide range of various sizes of angular shower structures, including each buyer can choose what it comes to him:

  • 90×90;
  • 120×90;
  • 80×80;
  • 100×100;
  • 80×100;
  • 100×80;

  • 120×80;
  • 70×90;
  • 70×70;
  • 60×90;
  • 120×80;
  • 90×80;
  • 110×80;
  • 90×100 and T. D.

Fencing and doors

To save space, you can use simple fences that will act as a soul corner meter per meter. Instead of a full fence, many are used by ordinary curtains, however Partitions made of durable glass are most popular, as they:

  • Safe (if you use the shower carefully, they will not break and can be used for a long period of time;
  • Hygienic (glass partitions do not accumulate pollution and clean enough);
  • differ in moisture resistance;
  • have a long service life;
  • differ simplicity of care (to clean the surface, it is necessary to have only standard means for washing glass);
  • Made from kaneylene glass or triplex, so they are characterized by strength.

Glass can be transparent or reorganized in various ways. Choosing between the fences, remember that decorative species need more thorough care.

That is why many acquire transparent either matte glass fencing, because they are easily clean. To create decorative fences, various methods can be used. The most common of them are the following:

  • matting;
  • toning;
  • Thermal silk-printing.

    To decorate the glass, other methods can be used, but they differ high costs, so rarely used. Most often in such a design, sliding or swinging sash are installed, less often apply pendulum or folding doors. In this case, there are those who have radius and skate sash. In order for the design elements of the design not violated the appearance of the product, they are hidden using special linings. Many stop their choice on sliding sash, as they are the most convenient and characterized by the available cost.

    Furnitura also plays an important role in creating an attractive and reliable design. It should be not only beautiful, but also reliable. As noted earlier, hidden fasteners are most often used, and preference is given to flat fittings. Choosing between the elements of the fittings, preference is best to give European companies producing, whose products are characterized by high quality. Accessories can be found for each type of shower corner, if you make an effort for this. European products are set relatively easy, so you can even consolidate the elements on your own.


    • Albatros – Italian company, which produces unique multifunctional showers. Products of this manufacturer are characterized by the presence of various functions that make the shower reception as comfortable as possible. The deficiencies are quite high cost on this product.
    • Appollo – One of the most famous brands in the Russian market, which more than 10 years produces quality products. The advantage of this manufacturer is that it produces both cheap and expensive corners, so, regardless of the budget you connect, you can find a model that meets your needs. Despite the fact that these are shower corners of the Chinese manufacturer, they are characterized by high quality manufacturing and are considered the best in the domestic market.

    • Avita. Products of this manufacturer are characterized by an affordable price. It should be noted that the range is not so wide, there are only a few models, which significantly reduces the choice. Shower corners are distinguished by high quality and long-term operational period.
    • Braus Germany. Products of this brand complies with European quality standards, however, their cost is relatively high. This manufacturer has already a long period of time occupies a leading position in the domestic market. Product range is quite diverse. There are models for every taste and color.

    A separate category should include domestic companies that provide relatively cheap products that are not inferior to the quality of products from Europe:

    1. Aquanet – one of the most popular companies. Releases various models that can be equipped with different additions.
    2. Aqua Joy – one of the leaders in Russia, which produces inexpensive shower models, but the range is not so wide.

    As the advantages of the shower corners of Russian production, it is worth highlighting the following:

    • Inexpensive cost: you can find a model depending on the disposable budget;
    • Ease of installation: designs are manufactured in accordance with the requirements of domestic communications;
    • Shower corners from local producers are always present in stock and there is no need to pay for transportation of the product from another country.

    Installation features

    There are a number of features of the installation of shower corners, which should be paid attention to:

    • Installation is necessary only on flat flooring (eliminated irregularities by replacing the old coating);
    • If it is planned to create leakage products, then the adjacent walls must be set to the tile to the top edge of the cabin;
    • joints must be treated with a sealant to avoid leaks.

    A full-fledged bathroom today goes to the background, and showers and shower corners are starting to be very popular. Main premises are eliminated from the overall bathroom, since the corner takes a lot less space, while characterized by high functionality. This is a convenient way to organize space.

    It is important to note that the system under consideration is characterized by the simplicity of installation. Thanks to this, you do not have to call specialists for making installation: you can do it yourself.

    Installation of the corner shower can be viewed in the following video.

    Rate the article
    ( No ratings yet )
    Add comments

    ;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: