What to do if the wallpapers diverged on the seams in the joints?

The pleasure of repair results in the house is often darling some shortcomings. However, it is possible to fix most of them. So, if the wallpapers diverged on the seams in the joints, there are several effective methods for their retouching and transformation.

What to do if the wallpapers diverged on the seams in the joints?

Causes

Most often, the reasons for the wallpaper deals are the mistakes of the wizard producing. Being an interior update, it is important to approach the procedure as soon as possible. So, if the wallpaper diverged on the seams in the joints, Most likely, the following shortcomings were admitted when working:

  • The walls were not verified for the presence of deformation;
  • The old coating was not removed: previous wallpapers, whitewashed or enamel;
  • Wallpaper in the corners were incorrect;
  • glue was incorrect;
  • neglect of the string of sticking;
  • The glue was not selected for a specific type of wallpaper;
  • Wallpapers had a paper foundation.

What to do if the wallpapers diverged on the seams in the joints?

What to do if the wallpapers diverged on the seams in the joints?

Gently stuck the wallpaper at the place of the joints after repair is much more difficult than preventing their peeling. So, it is also important before applying glue on the sheets of wallpaper Critting all the walls with a hammer. Seeing scratches, cracks, dents and chips, it is necessary to apply cement mortar, and after attaching and rebounding the surface. It is the latter fragments from the wall put the beginning of the slow destruction of aesthetic appearance after repair.

Besides, It is worth thinking about several times before sticking the sets on the old coating. Of course, when there are a lot of previous stelers, and some of them represent thin paper species, the process can become very laborious, and each person has conflicting feelings caused, first of all laziness. But it should be remembered that, firstly, the old coating can turn out, and secondly, fungus may be hidden for the previous wallpaper, which also causes the extinguishing of the coating from the walls.

Sticking the trenchars to “clean” primed walls with special solutions, for example, with protection against mold – the key to the fact that further restoration will not be required.

What to do if the wallpapers diverged on the seams in the joints?

What to do if the wallpapers diverged on the seams in the joints?

What to do if the wallpapers diverged on the seams in the joints?

Another possible error causing a detachment is improperly applied. It costs to clearly follow the instructions, giving the trellis to impregnate the required amount of time. By the way, the instruction will tell you how glue for a specific type of wallpaper should be used, and therefore carefully examine it extremely important. It is also worth remembering that the wallpaper is not always dug due to lack of glue on the joints, because often the excess of the adhesive composition does not allow them to dry correctly, why their offset is inevitable.

Very often, the wallpapers are spared in the corners, and the fault here is again the inexperience of the master. When I find a seam in the corner on bend, which is incredibly difficult to fit into the level, the wallpaper will inevitably diverge. The exit here is simple: The angle make up two sheets with a minimum overlay on each other.

What to do if the wallpapers diverged on the seams in the joints?

What to do if the wallpapers diverged on the seams in the joints?

It is worth noting that the cracks are often formed on cheap paper wallpaper, because the paper has a property stretching during wetting and decrease when drying. The exit can be the use of special glue on the joints, which does not allow the ability to leave the right place.

What to do if the wallpapers diverged on the seams in the joints?

What to do if the wallpapers diverged on the seams in the joints?

In more expensive copies, as a rule, such a problem does not exist. However, restoration may be required by quite objective reasons, for example, after flooding. Trelliers swell, acquire an unsightly shade and lag behind the walls. The deformed wallpaper in this case is difficult to stack, and therefore it is important to know some tricks.

What to do if the wallpapers diverged on the seams in the joints?

What can be used?

When the jokes were already separated from the seam, it is important to put them down as quickly as possible. This is possible with the following tools:

  • glue;
  • Tassels;
  • spatula;
  • rubberized roller;
  • syringe;
  • Tube with a special dispenser.

What to do if the wallpapers diverged on the seams in the joints?

What to do if the wallpapers diverged on the seams in the joints?

It is worth noting that only wallpaper glue is suitable for pasting. PVA does not dissolve in water, and therefore, after drying, it forms yellow divorces, especially noticeable on light coatings.

Nevertheless, some use for the liner with similar compositions, suffering later with the penetration of the canvas, as the PVA fixes the trellis. Wallpapers may disperse on the seams and in the event that bubbles were formed on the surface, which means that the cloth fell unevenly. You can get rid of unwanted relief using a conventional syringe. The algorithm of action is as follows:

  • pierce the needle from the bubble syringe;
  • remove the resulting air between the wall and the trellis;
  • Fill the syringe with glue;
  • Take a syringe with adhesive composition inside the canvas;
  • wait for complete impregnation of wallpaper;
  • Tightly press the restored area and smooth the roller.

What to do if the wallpapers diverged on the seams in the joints?

It must be said that today you can see special reinforced adhesives for joints. They are distinguished by high viscosity due to the presence of a polyvinyl acetate emulsion. In addition, the speed of drying out of any of the professional types of products is several times higher than the speed of drying the classical wallpaper glue. The resulting coating takes not only high strength, but also water resistance.

In the case when there is no glue, some masters advise to use a solution of flour or starch and warm water. Experts do not encourage the use of such a method, but for some it becomes budget salvation. However, folk methods exist, and therefore the method of cooking a homemade cessyer to mention. So, for adhesive composition it will take:

  • a glass of flour;
  • 2 tablespoons starch;
  • 2 liters of water.

What to do if the wallpapers diverged on the seams in the joints?

The volume of ingredients in this case is presented for a large portion, however, it can always be changed. So, water put on fire and wait for her boiling. Flour and starch are mixed with each other and poured with a small amount of cold water until a complete dissolution of lumps. Thin weaving the resulting mass is poured into boiling water with constant stirring. For 1 minute, the mass is continued to interfere, and after cool. To get rid of lumps, liquid must be strain through colander.

What to do if the wallpapers diverged on the seams in the joints?

How to glue?

To restore the wallpaper that dug out, It is important to comply with the following algorithm:

  • delicately unscrew the trellis departed from the wall;
  • Remove the resulting contamination, spacure pieces on the back of the wallpaper;
  • Speaching the woven wallpaper, as well as walls or ceiling. This will limit the harmful effect of the remaining dirt and dust;
  • Remove traces of rubbing around the edges. This can be done with a soft colorless erat;
  • In case the old trellis moved away from the walls with slices of putty, and the chill was formed, the wall should be touched and thoroughly treat the primer;
  • Loose glue using a narrow tassels Trelliers and walls. If a small piece has moved, the glue is applied using a special tube or a conventional syringe;
  • When using paper and textile trellis, they are pressed against the wall and frame with a rubberized roller. For vinyl wallpaper and flies-based chopper used wet fabric. It is worth noting that the movement of the roller and rag is important to carry out in the direction of the middle of the twenter to the junction;
  • For faster drying, you can use hot hair dryer;
  • The glued plot is smoothed again.

What to do if the wallpapers diverged on the seams in the joints?

What to do if the wallpapers diverged on the seams in the joints?

What to do if the wallpapers diverged on the seams in the joints?

What to do if the wallpapers diverged on the seams in the joints?

Do not forget that the tag must be delicately attracted to each other.

In the case when the seams can not be hidden, and they can be visible, you can take advantage of special planks, distinguishing space. Especially well they are suitable when horizontal salary of various trellis. Wallpapers, glued peeks, can be corrected by the same principle.

Tips and recommendations

Situations when wallpaper is frozen and diverge, you can avoid, observing several simple rules. First of all, specialists are extremely recommended to acquire wallpaper and glue on discount offers. In most cases, prices for them have reduced due to the reasons of the annifier or incorrect storage conditions.

Secondly, it is important to read all instructions on the wallpaper and adhesive compositions. It is also necessary to prepare all the tools, such as rollers, clean dry and wet rags. Folk methods are better not to use, After all, the era of the deficit has long passed, and a wide range of products allows you to choose a tool for every taste and wallet.

What to do if the wallpapers diverged on the seams in the joints?

In addition, pasting and restoration in the apartment is more reasonable to spend before the heating season. Wallpapers must dry in natural conditions and not exposed to drafts from open vessels and windows.

It is worth noting that precisely because of drafts may appear folds and wrinkles when sticking. It is possible to remove the folds from paper, vinyl and fliesline wallpaper by drank from the surface of the necessary part of the chopler and their further overlapping them in all the rules.

What to do if the wallpapers diverged on the seams in the joints?

It is important to note and the possibility of decorating and disguise the hole on the wallpaper. Such a situation can happen when attracting a sileler to each other. Disguise an unsightly error possible if available:

  • remaining pieces of wallpaper;
  • decorative stickers;
  • various kinds of applications.

What to do if the wallpapers diverged on the seams in the joints?

What to do if the wallpapers diverged on the seams in the joints?

So, you can close the hole with a more accurate and more accurately possible, finding exactly the same piece of wallpaper from a spare roll. For this:

  • a piece of patchwork carefully pick;
  • Cut in size using an acute stationery knife;
  • tightly apply to the place of hole and check the farewell of the selection;
  • glue a patch using glue to a damaged area;
  • the knife is cut into the glued piping together with the old piece of wallpaper and hide the section with a knife;
  • Divide the patch from a damaged piece;
  • Gift a new site again;
  • neatly glue part of the surface.

What to do if the wallpapers diverged on the seams in the joints?

Such a simple way, between the piping and the main part of the wallpaper will not be gaps. Nevertheless, there are such cases when there is no remnants of the sleeper, and the hole is visible not only on the wallpaper, but also on the wall itself. It is then that the only way remains to re-organize the sections with the help of stickers. It should be noted that Today, their variety admires. Fruits, flowers, images of food and drinks are selected for the kitchen, for living room and hallway – natural motives, as well as animal prints.

If, when attracting the steller in order to remove the gaps in the joints damaged a large piece, then only an applique of impressive sizes can disguise it, which is usually performed from durable films.

What to do if the wallpapers diverged on the seams in the joints?

What to do if the wallpapers diverged on the seams in the joints?

It looks stylish and relevant, and children’s rooms are transformed with it and become naive and fantastic. Applying one or another method of masking of the separated joints, it is important to remember that it would be much easier and aesthetically preventing their appearance at the stage of preparation for repair and sticking wallpaper.

The attached surface with a qualitatively applied primer will reduce the likelihood of seams and unsightly cracks several times, and the choice of good glue and strictly follow the instruction will help to avoid spent time busy.

What to do if the wallpapers diverged on the seams in the joints?

About how to shove wallpaper properly with your own hands, see in the following video.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment