What is a mirror polystyrene and where it is applied?

Special ornamental qualities, as well as operational characteristics made such mirror polymeric materials such as acrylic and polyvinyl chloride. Today we will talk about a mirror polystyrene, which also applies to this group. Consider its types, characteristics, list the spheres where it can be applied.

What is a mirror polystyrene and where it is applied?

Description

Shockproof mirror polystyrene – sheet material, which is included in the group of polymer mirrors. Composite synthetic rubber is used as the raw base for the mirroring canvase. Rubber raw materials in this material plays an important role: it prevents the occurrence of cracks on the surface, due to its properties, the strength is increased, reliable operation is possible.

What is a mirror polystyrene and where it is applied?

The reflecting layer is the polyester mirror film, which has an aluminum coating and pasted on a polystyrene surface.

Polystyrene is opaque, it differs from the mirror acrylic.

The reflecting side will be the basis, therefore Here is a protective film that allows you to avoid damage to the coating.

Pluses of the mirror polystyrene are obvious: It is durable, flexible, frost-resistant, as well as little prone to damage. From minuses can be noted Flavoring material.

What is a mirror polystyrene and where it is applied?

There are other properties of mirror painters from polystyrene:

  • resistance to chemical aggressive impacts are not destroyed;
  • resistance to impacts;
  • It is difficult to cut and scratch;
  • The rubber in the composition does not give to form microcrokes;
  • Maximum operating temperature – +70 degrees;
  • The perfect imitation of the mirror;
  • ease of processing;
  • Polystyrene mirrored sheets have thickness of sheets from 1 to 3 mm (thicker copies will become hard and fragile).

What is a mirror polystyrene and where it is applied?

Types and design

Mirror polystyrene has several varieties. Ceiling surface is most often trummed by tiles of rectangular or square shape.

They are like traditional silver, so different colors: blue, pink and golden.

What is a mirror polystyrene and where it is applied?

If we talk about design, then the following types are distinguished:

  • glossy;
  • matte;
  • toned;
  • with drawing;
  • white;
  • color;
  • painted under silver or gold covered with varnish;
  • With a real mirror.

What is a mirror polystyrene and where it is applied?

What is a mirror polystyrene and where it is applied?

What is a mirror polystyrene and where it is applied?

Today, the Russian market is replete with mirror polymers, which are manufactured both in Russia and in other countries: Germany, Italy, Austria. Note and individual manufacturers: These are German firms Plexiglas Mirror, as well as Metzler, Aulen from China, Italian company Saispecchi S. R. L., SIBU (Austria), domestic manufacturers Gebau and “E-Plast”.

What is a mirror polystyrene and where it is applied?

Discharge plates and size. They are:

  • 2000x1000x1 mm;
  • 2000x1000x2 mm;
  • 2440x1220x1.5 mm;
  • 2440x1220x2 mm;
  • 3000x1220x2 mm;
  • 3000x1220x3 mm.

What is a mirror polystyrene and where it is applied?

With the help of a mirror plastic of the desired size, an embodiment of any designer designs is possible.

Features of use

Operation of the mirror material has a number of features. Despite the fact that polystyrene has a high moisture resistance, the end parts and parts details should be protected from moisture ingress to avoid bundle. To do this, they need to be protected in any way. Care for products or trim from mirror polystyrene is quite simple. The surface is wiped with a soft cloth or sponge moistened in acrylic-based wiper. Polystyrene treatment with a mirror coating does not represent a special complexity.

What is a mirror polystyrene and where it is applied?

However, the material under consideration is varied, so when working it is important to prevent the destruction of the clutch between different layers.

To do this, there are certain rules that need to be considered:

  • Holes in mirror polystyrene Better to do with the help of drilling equipment at high speeds, At the same time, drill should be from the side of the mirror film, and the protective film should be removed;
  • Cutting laser must be made from the side of the material without coating;
  • When cutting segments by any mechanical tool follows freeing the planned line cut from the protective film;
  • Mirror polystyrene is well pasted on different surfaces; For gluing, you can use neoprene-based adhesive compositions;
  • To reduce the probability of overheating and deformation of the material under consideration, it is necessary Cool surface in processing places.

What is a mirror polystyrene and where it is applied?

Application area

Polystyrene mirror tile looks quite effectively. It is not surprising that her designers, builders and creative personalities who prefer to interior are preferred by their own. Such material is often used for interior decoration of rooms: floor and ceiling.

From this interior of the apartment or house only wins, because reflective tiles fill the space with light and expanding visually.

What is a mirror polystyrene and where it is applied?

However, it is worth it in mind that The reflective polystyrene tile has and minus – the reflection in the mirror surface is not always perfect, it is a little distorted. This is because the ceiling is rarely smooth, often there are some bends and irregularities on it, which transmits its shape tile with a mirror. So before installing the tile it is advisable to align the ceiling.

What is a mirror polystyrene and where it is applied?

Widely used material with reflective effect in the manufacture of promotional products, decor, interior signs and other products and items of information. Given the small thickness and good flexibility of the mirror material, they can be separated by curvilinear surfaces.

What is a mirror polystyrene and where it is applied?

Quite often, this mirror version of polystyrene is used where, for security reasons, it is prohibited to apply real glass.

As an example, it is possible to note the use of material in kindergartens, schools, as well as when making mirrors of large areas.

As already mentioned, It is impossible to assolidate the material, so the ends of the sheets must necessarily be protected from moisture. For this reason, experts do not recommend using a mirror polystyrene to perform external work.

What is a mirror polystyrene and where it is applied?

The video below describes how to correctly cut the mirror polystyrene.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment