What are handclouds and how to choose them?

A tool that leaves threads on pipes, bolts, hairpins and other metal or plastic products, called Klupp. The device can be used not only for applying protesters, but also to restore the already worn thread.

What are handclouds and how to choose them?

What are handclouds and how to choose them?

general description

Handmade Cuts for cutting threads – a very effective device that must have every wizard. This tool is applied not only on an industrial scale, but at home.

The device consists of cutters of different diameters and holder. Most often, the product is made of cast high-strength metal. Cutter something reminds a simple cry. In shape, this is a small cylindrical item, which has a notch for the removal of metal chips outwards formed during the carvings.

What are handclouds and how to choose them?

Thanks to the handle, the work becomes easier, and the forces spent not so much as when working with a simple layer. And because of the special grooves, the adjunctions and clamp of the clamp occur better.

Inside the heads are the ridges that leave the penetration. The first turns are usually not so sharp, and they only outline. Subsequent turns begin to make deeper threads. Accordingly, the carving becomes more acute.

What are handclouds and how to choose them?

Nozzles have two types of carvings: Right, which is found on all products and pipes, and also applies to GOST, and the left type is less common and used for restoration work.

In addition, the heads have two types of measurement: inches and millimeters. The main difference between them is that each different corner of thread cutting. Inch measurements are considered more relevant, even GOST rely on this species.

What are handclouds and how to choose them?

What are handclouds and how to choose them?

Review of species

Pipelmps are divided into 4 species that are most often represented in the market. Each of them is suitable for a specific type of work and carving.

  • Kindls. The product belongs to the simplest thread-cutting tools. Used for superfit on screeds or bolts. Skit Klupp has a dimensional mesh from 1 to 5, and seems to be in the form of an oblong frame with two handles and a hole in the middle. Frame can be moved towards moving nozzles that are adjustable by a thrust screw. In this case, the nozzles are referred to as the thread be applied correctly, and the tool worked properly, it is necessary to correctly install the tracks in the club, following the instructions.

This can be done through digital designations that must match. Otherwise faces a breakdown of the instrument, or the impossibility of correctly apply to them.

What are handclouds and how to choose them?

  • Klupp Maevsky considered classics among the klupp. This species can always be found in stores or workshops. The mechanism of the tool is simple, and lies in the fact that there is a groove with a groove, in it, the adjustable turns are fixed using a stubborn lid. Special screws regulate the size of the dies. On the frame there is a guide flange, which is connected to guide bushings. Rotation of dies is carried out due to the rotation of the handle. Since all tools have a limit, Maevsky’s clouds are suitable for pipe threads with a diameter of up to 2 inches. But in the sets are the heads of various sizes, as well as with the help of special adapters, you can increase or decrease the dimension range. The tool has a small weight, it is easy to use, and the design itself is not overwhelmed by unnecessary accessories.

What are handclouds and how to choose them?

  • Pipelp Practically no different from the previous model. The dimensional row of dies is almost identical as the appearance. The housing is made of cast iron, there are 3 grooves for the direction of the dies, and inside 4 slots for the rank. Races at the model are divided into two sets. The first have the possibility of applying only one side, the second – double-sided.

What are handclouds and how to choose them?

What are handclouds and how to choose them?

  • Clusp with rattling – Modified tool. It combined a simple concept of dies with a handle, only in the knob itself placed an additional mechanism to relieve work. This allows you to exceed the performance several times, especially in hard-to-reach places. But there is also a reverse side – with improper or too aggressive use, the ratchet can break, and it is not subject to repair. Therefore, too much to put pressure on the tool.

What are handclouds and how to choose them?

The best manufacturers

There are a large number of diverse tools in stores. This applies to manual clusters. There are both expensive brands and more budget. Consider some of them.

  • “Bison Expert 28271 – 1”. Manufacturer Country – Russia. Good quality and reliability. Includes replaceable cutters. Weight 0.86 kg. Thread direction – right. Suitable for works with pipes of conical shape. Budget option for homework.

What are handclouds and how to choose them?

What are handclouds and how to choose them?

  • Ridgid 12 – R 1 1/2 »NPT. Produced in the USA. Right-sided thread. All items are made of doped steel. Weight of 2.8 kg. Due to quality materials, has a long service life. Practicality and functionality is also noted.

What are handclouds and how to choose them?

  • REMS EVA (CET R 1/2 – 3/4). Made in Germany. This model is inherent in compactness and low weight, which allows you to carry out work in small spaces, where it is impossible to have a large angle of reversal. Nozzles change without much effort, as well as in the heads well developed holes through which the chips are removed during operation.

What are handclouds and how to choose them?

Tips for choosing

The price segment of the clupp for cutting a thread is quite extensive. Before buying, you must answer some questions: how often the tool will be used, and for what works.

These uncomplicated questions will help you understand what models worth paying attention to. If the tool is necessary for the house, then it is best to consider inexpensive models that, with an infrequent use, will serve for a very long time.

What are handclouds and how to choose them?

If for professional work, it is better to look at more expensive models or to electric clupps.

How to use it?

Any tool requires proper care and proper use. This will save the device and extends its service life.

  • Before working the tool, it is necessary to secure the pipe. To do this, you can use clamps. Since there will be great strength on the club, it is necessary that all the elements are correctly fixed.

  • Directly, the occasion itself affects the quality of work, Therefore, before starting the pipe, it is best to fade.

  • CLRP must be used very carefully, and best during work use cooling and lubricating liquids.

What are handclouds and how to choose them?

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment