What and how to paint fiberboard?

Very often, when repairing premises or construction, tree fiber plates are used. And, of course, the question arises – what and how to paint fiberboard. Materials on the construction market are a lot, therefore it is worth familiar with this issue in more detail.

Features of the material

Most novice masters think that painting the fiberboard with their own hands – this is, in general, the easiest thing that may be in construction or repair work. However, so that the whole process is successful, as a result, the surface was pleased with the eye and was qualitative, it is necessary to take into account the features of the material.

DVP is a plate consisting of extruded waste industry waste. Pressure and heat, under the influence of which the manufacture of plates occurs, allow you to make them light and smooth. They are suitable for the manufacture of furniture and plating internal surfaces in rooms.

The advantages of this material include the following:

  • an acceptable price that affects what plates are made from woodworking waste;
  • Strength allowing for a long time to use things in the manufacture of which DVP participated;
  • moisture resistance, but it is possible to provide it with a special coating at the processing stage;
  • Long service life – it will depend on the correct processing and use of the material.

Deficiencies are not so much. One of them is that the use of DVP to arrange the supporting structures is excluded. Someone does not quite satisfy the design of the plates.

In addition, it must be remembered that in the wet premises, the plates themselves cannot be used; they need to be carefully treated with special compositions.

Varieties of coating

On the shelves of construction stores today there is a very large variety of all sorts of paints, on the packages of which contains a detailed product characteristic and for what purposes is applied. Most often, consumers are offered quick-drying paint and in many cases without smell, which allows you to produce work and calmly be in this room, without risk to get poisoning or even a conventional headache. When processing DVP, you can take advantage of the next enamel:

  • water-emulsion;
  • alkyd;
  • Oil;
  • acrylic.

Choosing a coating, should be considered, for which surface it is intended.

For gender, you should choose paint with marking Art, it is more resistant to all influences. A good option will be alkyd and oil paints, but the finish treatment of varnish will be required. As for the color palette, it is simply unlimited. You can buy both the finished colors of paint, and create your own shades using various kernels.

Preliminary preparation for painting

Before painting the surface, it must be processed correctly. The compositions that are intended for this are called differently – primer, veil, olifa, but the essence of the impact of them. All of these means allow you to improve the quality of the coating and appearance. They are able to protect the fiberboard from moisture, fungus, dampness and increase the service life. In some cases, it is possible to change the color and gaze of the surface.

Before work, in addition to special compositions, you need to prepare and tools – rollers, brushes, special containers in which it is convenient to pour the composition immediately before work. Large squares are more convenient to primer large rollers on long handles. In hard-to-reach places for the rescue. Special capacity is convenient because it is possible to plunge the roller into the solution, while removing the excess. And at the same time the work process will be rapid and neat.

Before covering the plates in any composition, it is necessary to clean them from dust, wipe with a damp cloth, and if necessary – let me dry. Treat fiberboard by any selected composition, it is possible to lay them on the floor or installation on the wall or ceiling. Covered with primer better not only on the outside, but also from the ends.

Play slots and other irregularities need when the sheets are laid on the floor or attached to the wall. Then you need to give time to putty dry. Prix ​​surfaces preferably several times with an interval of a few hours so that each layer absorbed well.

From how qualitatively preparatory work has been conducted, the quality of painting and the further term of their service depends. The last stage after all the work will be the surface coating with varnish.

How to paint?

When all the preliminary work is completed, the time of painting occurs. To paint the desired surface, you first need to calculate the paint consumption, this, by the way, will be done without any problems in the construction store Consultants. It is important to buy the required amount immediately, because if the paints are not enough, there is a possibility that the shade in the next bank is at least a little bit, but will be different. If the paint remains unnecessary, that is, the likelihood that soon it dries away if it is not used.

To paint the panels on the ceiling, you need to prepare the necessary things, above all, the stairs. If so is not available, it will be able to replace it. Next, surfaces are scratched in hard-to-reach places, for example, corners, then roller can paint any surfaces. You need to move from the inner parts of the room to exit. For such work, it is advisable to protect your hair and eyes in order to avoid droplets of paint on face and head. Do not hinder the roller too much paint, like a brush, so that. Better then walk once again with a brush again on the ceiling, the more commonly painting is produced in two layers.

If the primer was previously produced, the paint will go to the surface smoothly and easily.

On the wall, the principle will be the same. But here it is quite possible to do without a staircase, if you purchase a special roller with a long handle. Thanks to this adaptation, the paint falls evenly, dries faster, work is easier and faster. Start also with complex places and inner corners, moving towards external.

On the floor to paint more convenient to the brush, but this is solved by the master. Before painting, you need to pay attention to the fact that the floor should be perfectly clean. And even if it was already treated, immediately before painting it is better to walk the vacuum cleaner. It is necessary to advance inside the house in the same way, ranging from the windows – and to the entrance door. When painting floors, all things should be taken out of the room immediately.

It makes no sense to paint with pieces, because when moving furniture or other items, fresh paint can be scratched. Whatever the paint quick-drying on the promises of the manufacturer, it all early needs to give enough time to dry. At least a day, the floor can not be touched, but better two or three. But it all depends on the composition of the paint, information about this is contained on the bank, as well as about drying.

Very often in apartments and houses, DVP are used not only to cover surfaces (floors, walls, ceiling), from wood plates make interior doors, arches, partitions. Paint them is not more difficult than smooth squares, with the only difference that hard-to-reach places, reliefs need to carefully handle a small comfortable tassel and cry.

An important point is not only the preparation of tools, surfaces and the process of painting, but also safety.

Despite the fact that modern paint made according to the latest technologies using harmless components in many cases does not have a sharp smell, nevertheless it is not worth “inhaling its aromas” in a closed room. Windows is better to open to provide fresh air access. But at the same time, it is necessary to take into account the important nuance, dust and dirt can fly from the windows that are easy to fall on freshly cut panels. Therefore, you need to take care that there is a special grid on the window frame or consolidate the usual gauze. If all this happens in winter, then periodically need to air the room.

About how to paint the fiberboard, look in the following video.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: