Waterproof Water-Resistant Paint: Selection Features

    Each at least once in his life came across repair work, and always a question about the choice of material and tools, because there is a huge selection of paints and varnishes. To date, the most common is the water-level paint. It is designed to finish various surfaces. Get acquainted closer with this paintwork.


    The basis for water-level paint is water and particles of polymeric substances. The type of mixture depends on their quantity and properties.

    Additional elements may also be present to improve the useful characteristics of the material.

    Before buying paint, be sure to pay attention to its composition, consumption, viscosity and storage conditions.

    The incoming components depends, where and how to apply a water oremulsion:

    • Viscosity is the possibility of breeding paint water. It is measured using a viscometer.
    • Painting consumption depends on the viscosity of the material and the method of applying. When using brush, it is 40-45%, and when using a pulverizer – 20-25%. On average, the consumption of this material is small – 250 g per 1 sq m.
    • The total drying time is about 20 hours, and sometimes less (all dependence on temperature and humidity). Store a jar with paint preferably in a cool place.


    The water-emulsion has become popular due to its properties.

    • It is an eco-friendly and safe material that does not have a sharp smell.
    • In addition, such a paint is harmless to the body.
    • It is easily removed from various tools and surfaces with a soap solution.
    • Plus waterproof paint is its rapid drying. Grabs about 2 hours, after which you can apply the following layer. Of course, drying speed directly depends on air temperature. What it is lower, the longer the composition.
    • Large selection of color solutions.
    • To get the desired kaper is enough to add a specific dye.
    • It is convenient for use, easily falls on any surface.
    • Such paint can disguise small cracks on the surface.
    • It is inexpensive.


    There are practically no shortcomings in this paint. However, it is possible to use it at a temperature not lower than +5 degrees. Another minus lies in the fact that the composition includes a great water content, so the metal and glossy surfaces are not recommended to cover such paint.


    Two main types are highlighted:

    • Waterproof or moisture resistant.
    • Heat resistant or silicate.


    There are several types of heat-resistant paints:

    • For temperature from 80-100 degrees Celsius, paint is used based on an alkyd or acrylic component.
    • For a temperature of 100-120 degrees, the material is used, the basis of which includes epoxy resin.
    • For temperature 200-400 degrees, paint is used based on ethyl silicate or epoxy resin.
    • At a temperature of 400-600 degrees, paints and varnishes are used, which include special silicone resins.

    The choice of paint depends on the work you want to conduct, as well as on the degree of incandescent material. The heat-resistant compositions are suitable for coloring of fireplaces, mangals, heating radiators or stoves.

    By purchasing these paints, carefully read the instructions for use.

    Moisture-resistant or water distribution

    This paintwork material is perfect for work both indoors and outside. It can be used for finishing in spaces with high humidity: in the bathroom or in the kitchen. It is well clean, perfectly falls on any surfaces: plaster, brick, concrete, wood or plasterboard.

    Depending on the composition, the water-level paint is divided into several types:

    • Mineral.
    • Silicate.
    • Acrylic.
    • Silicone.


    It has cement and haired lime. Such paint is used for any internal work with concrete and brick materials.

    It is perfect for finishing different premises, but because of its briefness recently lost popularity.


    The composition includes Liquid Glass and Colored Pigments. Suitable for both internal and outdoor work. Silicate paint has resistance to temperature and moisture drops. Has a long service life (up to 20 years).


    This paint is the leader in the construction market. It is in demand for both professionals and inexperienced masters. Acrylic resins included in the mixture have a weighty advantage over other types of paint mixes.

    Acrylic paint is used to decorate walls and ceilings, as well as other types of work:

    • Perfect for facades of buildings from concrete, brick, and plaster.
    • Well suitable for coloring of wood, metal, plastic and glass.
    • Protects the surface from corrosion.

    Sometimes Latex is present in the composition. Thanks to this component, paint is better than the moisture. You can safely wash the painted base, without fear that it will wash off with water.

    Acrylic paint with the addition of latex you can close small cracks on the basis. Layer should not exceed 1 mm. At the same time, the period of its drying (at home temperature) will be several hours.

    Silicone or latex

    The main component of these colors is silicone. This variant of the mixture will be indispensable for raw rooms, as well as in rooms where systematic wet cleaning needs cleaning products. Paints of Latex.

    Such paint is considered the most expensive due to water-repellent and paroque abilities. She can close small cracks on the basis of. This allows not to align the surface in advance.

    Such paints have a good anti-grapple effect, which is necessary in rawroom facilities.

    Use of Koller

    Water-emulsion paint is easily collaborated. You can do it yourself. Many use this method in order to save, because the price of a white mixture is significantly lower, and more and more possibilities appear when choosing a color.

    You can achieve your desired shade on your own:

    • Calculate the paint consumption as accurately as possible (with a slight margin), since it will not be able to reuse the same color.
    • Add a koler to small portions, constantly stirring.
    • If it seems to you that the desired shade is achieved, do not rush to paint a large area. To begin with, test the composition on a small, low-speed area, and then wait for it to complete drying so that the kel can manifest.
    • After a satisfactory result, go to large volumes.

    The choice of color scheme needs to be done very carefully. In small rooms it is better to use bright shades, because such a palette visually expands the area.

    If you paint the walls in dark tones, and the ceiling is in bright, then the room will look narrow. Such a method is used with low ceilings. Do not use more than two colors in one room.

    It is better to combine shades, then the space will not look like a motley.

    Using roller

    When using a brush, paint consumption increases. It is better to use it for work in hard-to-reach places, and for large areas it is worth buying a roller and tray. Here you also need to consider, from which material is made tool and fur coat.

    For stucco and rough surface, it is better to use a long pile roller, and a short fiber is suitable for smooth base. The tool should be freely placed in the tray to make the emulsion as comfortably as possible. Also, the roller should not be immersed in a solution greater than a quarter.

    If the paint is blunting badly, then it is possible to dissolve it with water, but no more than 10%, otherwise the composition will lose many of their properties. Roll the mixture on the wall needed with the same pressure to avoid the manifestation of strips and joints. The coating should be applied in several layers to avoid the appearance of cracks.

    Before the painting of the next layer, make sure that the first is sufficient.

    Walking Wallpaper on Water-Emulsion Paint

    This paint is considered a universal coating. It combines with any materials. If it is necessary to replace the finish – this is not a problem. Just treat the surface with a solution of glue and primer 1: 1. After drying, you can safely glue the wallpaper.

    For complete persuasiveness, it is permissible to test the coating after processing. On a small plot with glue newspaper, waiting for her drying, and then try to tear it off from the wall.

    If it gives care poorly, it means everything is in order and you can continue to work.

    Oil paint

    Today in stores there are often coatings in the form of oil paint. Previously, such formulations were popular and used everywhere. Water-level paint is incompatible with this coating, so the old finish is better removed.

    Clean it in several ways:

    • Mechanical. Remove paint with a spatula or sandpaper.
    • Chemical. Remove with solvents.
    • Thermal. Cleaned with surface heating. When the old paint decides, it can be removed from the base with a spatula.


    Consumers are positively responding about water-emulsion paints. Most buyers please the ease of their application, environmental friendliness and lack of unpleasant odors.

    Doing people only that such compositions can be painted not every reason due to the water base, as well as their incompatibility with some finishing materials, such as oil paint.

    More information about waterproof waterproof paint You will learn from the following video.

    Rate the article
    ( No ratings yet )
    Add comments

    ;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: