Currently, a wide application has found various types of vibrating plates. This unit is used when conducting construction and road works. So that the plates could last stop without breakdowns, the oil should be changed in a timely manner. Today we will talk about its main features and what kind of oil varieties are.
The following types of oil are used for vibrating plates:
For models on gasoline such brands like Honda GX390, GX270, GX200 is best suited for mineral motor composition with a viscosity of SAE10W40 or SAE10W30. These types of oil for vibrating plates have a large temperature interval, good thermo-oxidative stability. When used, the minimum amount of soot is formed.
Synthetic oils differ from mineral mixtures at the molecular level. Synthetic elements molecules are synthesized with specified properties. In addition, they are able to wash all sediments on the details more quickly due to high yield economic. Mineral masses make it more slowly.
Semi-synthetic compositions are obtained by mixing two previous types of oils.
Composition and properties
For vibrating plates that work with gasoline engines, it is better to select a special mineral oil. This product is the most natural of all varieties. Mineral composition for such an oil is created on the basis of oil components by distillation and cleaning. Such manufacturing technology is considered the easiest and fast, so such mixtures have a low cost.
The composition of the mineral base includes alkaline elements and cyclic paraffins, hydrocarbons (cyclane, aromatic and cyclano-aromatic). Also there may include special unsaturated hydrocarbons. This type of oil will change the degree of its viscosity depending on the temperature regime. It is capable of forming the maximum stable oil film, which is characterized by good stability.
Synthetic options have another composition. They are manufactured at more complicated technology. In addition to the basic mixture, such varieties contain elements made of polyalphaolefins, estrices. As part there may also be semi-synthetic components. They are 30-50% produced from synthetic fluid. Some varieties of oils additionally contain various essential additives, detergents, anti-wear fluids, anti-corrosion additives, antioxidant substances.
As in the previous embodiment, the viscosity of the oil will depend on the temperature regime. But it is worth noting that the viscosity index is high enough. Also the mixture is characterized by a low level of evaporation, low friction coefficient.
Before pouring oil into the engine, vibrator and reducer of vibrating plates, you should familiarize yourself with its composition. Need to take into account the viscosity of the mass. Various mineral products are used more often. Remember that inappropriate viscosity oils can lead to a breakdown of equipment.
Also, when choosing, you need to pay attention to the reaction of the fluid when the temperature factor changes. In this case, synthetic varieties are less reacting to similar changes, so when working In conditions of sharp temperature differences, synthetic options are more often used.
Before filling or replacement, check the oil level in the technique. For starters, equipment is placed on a flat surface. Next, with the hole in which the liquid is poured, the cover is removed. There is starting to pour the mixture to the designated mark, and it should not pour a larger volume. When the oil is flooded into the hole, the engine is turned on for a few seconds, then turn off. Then once again do the level of fluid level. If it remained unchanged, then you can already start working with appliances.
Remember that if special filtering elements are not provided in the vibrating plate, then the oil will have to be changed quite often, because strong contamination will be formed in the process. After the first use, you will need to change the liquid after 20 hours of operation. In the following times, the fill produce every 100 working hours.
If you have not used such equipment for a long time, then it should also be replaced by oil before starting work in order to avoid breakdowns.
On the subtleties of the launch of vibrating plates and oil filling technologies will tell the following video.