The 8 best shower heads

*Review of the best according to the editorial. About the selection criteria. This material is subjective, not an advertisement and does not serve as a guide to purchase. Before making a purchase, please consult with a professional.

The modern man cannot imagine his life without water procedures. One of the most enjoyable things about taking a shower.

This procedure allows you to relax after a hard and dressed up work, sports, hiking or tiring trip. Falling water not only allows you to wash, but also to relax.

Using different shower heads, you can get spa treatments with massage or chromotherapy from the comfort of your home. In order to get the maximum benefit from the procedure, it is necessary to choose the right nozzle.

Faults: Criteria for the selection of the shower head

Before choosing the right model, you should study the features of the design. Although nozzles refer to uncomplicated devices, each model is designed to create a unique flow of water.

When choosing a nozzle, the following points must be taken into account:

1. Not all shower heads can work with low head of water. specially designed devices are used for this purpose. If the head is weak, you can not use a large-diameter dissipators;
2. The preferences of each family member. Waterheads with different water delivery modes from tropical downpour to soft enveloping jets aerated with air are used to meet needs;
3. Shower cubicle dimensions. Large nozzles look out of place in a small room. When taking a procedure, the entire area of the shower will be flooded with water;
4. The resulting effect of taking the procedure. Leaks allow you to create the effect of pouring (tropical) rain, massage, gentle touch to the body, mixed type.

Pay attention to the material from which the shower head is made:

1. Plastic is the budget option. Metallized coating gives a presentable appearance at a low cost of the product. These devices are not heavy. No need to worry about damaging the tray if it falls;
2. Metal. They are durable products, available in stainless steel, bronze, brass, copper. Mimic a gold piece. They can be easily cleaned of limescale, dirt and disinfect. Products made of brass and copper are often expensive exclusive options;
3. Metal-plastic combines the advantages of the first two options. The interior is made of metal and the exterior is covered with plastic;
4. Stone and quartz glass. These are beautiful, durable and expensive devices. Produced in limited quantities, as exclusive watering cans.
5. Our experts believe that the best option for nozzles are steel or copper. They are durable, well-designed and have an optimal price-quality ratio.

Choosing a watering can, pay attention to its attachment:

Ceiling or wall-mounted stationary fastening. Usually they are used in shower cabins or special boxes. ceiling fixtures are fixed rigidly to the ceiling without any possibility of adjustment. This function exists only in the more expensive models. They provide a tropical downpour simulation. But such models need a lot of pressure. Made of chrome-plated brass. Available in various configurations. Wall models have a swivel joint that allows you to change the angle of inclination as desired. permanently mounted at a convenient height. Such devices are convenient because your hands are always free. But they are inconvenient for people with disabilities, for washing children or animals. Therefore, in addition to the ceiling-mounted shower heads, cabins are also equipped with wall-mounted flexible hose;

Handspray with flexible hose. This option is the most preferable. It is easy to place it on a rod fixed to the wall. The height can be adjusted over a wide range. Can, if desired, be mounted on the wall and used as a stationary. High mobility allows you to quickly remove from the bracket or rod and direct the jet in the desired direction. It is convenient when washing children or animals.

Experts recommend giving preference to models with metal attachment points to the bracket or rod. Plastic products fail quickly.

The main thing to pay attention to while choosing a model is the structural features of the water diffuser. This is the most complex and responsible part of the device. Has multiple openings through which water flows when taking a treatment.

Diverters are available in two types:

Plate with regular holes.Made of metal or plastic;

1. Diverter with a curved surface. Each hole has a nozzle – a rubber tube. They do not have a tendency to get limescale on them. Clogs only with coarse sediment. Work well at a low head, allowing you to take a procedure with comfort.
2. There are a huge number of nozzle options in the sales network. They differ not only in construction and fitting, but also in form.
3. From the simple round, oval, rectangular, triangular to the exclusive and designer ones in the form of telephone tubes, lianas, rings, snowflakes, etc.p. Faucets can be selected to suit all tastes and interiors.

If you wish, you can choose a spout with additional functions:

1. Mineralized nozzles. Structurally, they do not differ from the ordinary ones, but are equipped with filtering elements with compartments that contain tourmaline, shungite, flint, magnets, chlorine absorbing granules, etc.p. The result is cleaner, softer water with reduced chlorine content;
2. Illuminated.It is not required to be connected to the mains. A stream-powered micro-generator is built in. Enough energy to run the LEDs. Taking a shower with such illumination allows to get a charge of positive emotions, promotes raising of mood and vivacity;
3. Use of the thermostatWill not allow sudden changes in temperature of liquid flow. Simply set your own comfort temperature. The spout will independently mix the water in the desired proportions;
4. Aeration deviceand flow control. Not only provides a comfortable bathing experience, but also saves water consumption significantly.

Our experts have picked up some variants of the most common and popular watering cans according to the rating.

8 best shower heads

The hansgrohe Raindance Select E 150 3jet 26550000 chrome shower head

Rating: 4.9

The nozzle is designed for water procedures. Has a good look. Manufactured of chrome-plated plastic.

Has a special coating to prevent limescale deposits on the surface. The 150 mm diameter shower head has three spray modes with a maximum flow of 16 l/min.

Convenient push-button selection of functions: “soft jet”, “massage jet”, “mixed jet”. With 1/2″ threaded connection as standard.

Advantages

• Modern design;
• The large spout allows you to spritz your whole body at once;
• Pleasant jets. Easy to switch modes.

Disadvantages

• high price.

Oras Bidetta 242050

Rating: 4.8

It is a round shower head with a diameter of 2,5 cm for personal hygiene. Made of brass and plastic.

Structurally designed as a simple and reliable chrome-plated nozzle with one jet mode, without a mixer, designed for domestic use. With 1/2″ standard threads.

No maximum temperature limitation. Made in Finland.

Advantages

• Reliable;
• Modern design;
• Not expensive.

Disadvantages

• Not detected.

Hansgrohe Croma 100 Vario 28535000

Rating: 4.7

The hansgrohe Croma 100 Vario 28535000 100 mm diameter shower head makes hygiene a pleasure. Four massage modes for several massages.

from gentle, relaxing “soft jet” to powerful “massage jet”. swivel mechanism for easy changeover.

Body made of chrome-plated plastic with limescale-repellent coating. The nozzle is designed to operate the network with a pressure not exceeding 3 bar, provides a water flow rate of 18 l/min. It has a standard 1/2″ connection.

Advantages

• The presence of four massage modes;
• Anti-lime coating;
• It pours over your whole body at the same time.

Disadvantages

• Not observed.

Grohe Tempesta New 28578002

Rating: 4.7

The Grohe Tempesta New 28578002 household nozzle is designed for taking water treatments at home. The shower head is delivered without a hose and a mixer.

Chrome plated and limescale resistant. Four spray modes with swivel mechanism. For a gentle, massage and mixed spray of water.

Enables manual selection of the Rian, Rian O2, Massage, Jet modes. Diameter 100 mm gives a homogeneous flow of water.

Advantages

• Good appearance and build quality;
• The modes of operation allow you to get maximum pleasure from taking the procedure;
• Has a protective coating against limescale.

Disadvantages

• Not identified.

IDDIS A11251

Rating: 4.6

The robust spout with a large diameter of 130 mm makes bathing a pleasure. Five switchable modes with a revolutionary mechanism and an intensive water flow of 17.5 l/min, provide the pleasure of a water massage.

The shower head comes without a hose. Body made of chrome-plated ABS plastic for a sophisticated look. Limescale protection ensures the safety of the coating.

Advantages

• Reliability;
• Inexpensive;
• Large shower head and multiple modes of operation.

Disadvantages

• Not detected.

AM.PM B

ss F0253100

Rating: 4.6

The trendy appearance of the gold Lemark LM8007G showerhead adds luxury to the shower. Handspray with a diameter of 73 mm is made of gold-plated brass.

Designed for taking water procedures in one mode. Features a 1/2″ threaded connection for connecting to a flexible hose.

Advantages

• Reliable construction;
• Good appearance;
• Good value for money;
• Has a high rating.

Disadvantages

• Not identified.

WATERWORKY WS-005 CR 4

Rating: 4.5

The exclusive design of WATERWORKY WS-005 CR 4 enables not only hygienic but also health-improving effect. Has 4 water modes.

Combines the ordinary flow with the “silk rain” mode, when the finest jets create a hydro-needling effect. Power Shower allows you to take a Charcot shower at home.

And the water fog mode is good for relaxing before going to sleep. Switching is done by turning the square head. Water is supplied from one of the four sides of the nozzle. Made of ABS plastic with wear-resistant coating.

Advantages

• Unusual design and construction;
• Creates a good pressure in different modes;
• Has a good price-quality ratio.

Disadvantages

• Not always available.