The 6 best powder coat manufacturers

Powder paint becomes more and more popular every day in paint-shops of Russian enterprises. Unlike traditional liquid spraying, polymer coating has better weather resistance, fire safety, coating durability. Powder is applied to the piece in a dry state and melted under the effect of temperature, forming a solid film. After hardening a beautiful and durable coating is obtained. To choose the right powder paint, experts recommend paying attention to the following points.

How to choose a powder paint

  1. Types of powder coatings. Powder paints differ in chemical composition. Each has advantages and disadvantages.
  2. Polyester paintResistant to UV rays, atmospheric moisture and temperature fluctuations. It is best suited for decorating facades, painting garden furniture, equipment that are operated in the open air. To the disadvantages, specialists refer low dielectric indicators.
  3. Epoxy-polyester paintRecommended for corrosion protection of metal constructions that are used indoors. The material has a beautiful appearance, smooth gloss and resistance to water and petroleum products. However, it is not possible to get a matte finish when using low-temperature products.
  4. Epoxy paintis characterized by resistance to chemical attack. The material has high dielectric properties. The coating burns out in the sun, it cannot withstand strong temperature fluctuations.
  5. Surface types. The choice of powder paint must take into account the nature of the surface to be protected.
  6. The ideal choice is a smooth base, which allows you to apply a wide range of paint materials. It can be a powder paint with high gloss (up to 95%) or a product with a matte finish (7-10%).
  7. When the surface has welds, chips or sinks, you can use the paint “shagreen” without additional preparation. When cured, it forms a coating that resembles orange peel.
  8. If there are numerous and fairly large defects on the base, in this case it is better to give preference to powder paint with a “coarse shagreen” surface. But you have to save money on substrate preparation and then you have to put up with a higher powder consumption.

We have selected the 6 best powder coat manufacturers in this review. Products of these brands are widely represented in the Russian retail network. Opinion of experts and feedback from Russian consumers were taken into account in assigning the places in the rating.

Rating of the best powder coating manufacturers

Nominationplaceproduct nameRATING
Rating of the best powder coating manufacturers1Duxone4.9
3Akzo Nobel4.7



    Rating: 4.9


    The Duxone paint system was developed in 1998 for the medium price segment. Experts note that the company has retained all the advantages of a family business. It has not joined large concerns and has kept its traditions. The manufacturer offers Russian consumers a full range of paints and varnishes, which are made according to modern technologies. The catalog offers all components necessary for repairing car bodies, from fillers to topcoats. The brand is well known and loved by car repair shops and smaller repair shops for its ease of use. Duxone is the winner of our ranking.

    Body repairers praise the paint for its high quality and reasonable prices. The materials dry quickly to form a durable and resistant coating.


    • high quality;
    • time-tested formulations;
    • modern technology;
    • affordable prices.


    • none.


    Rating: 4.8


    One of the biggest powder paint producers is Arsonsisi. The company has been operating since 1920, holding leading positions in the paint market with enviable consistency. Italians were among the first who mastered the production of powder paints (1972). The company keeps up to date, doing its own research and development. Particular emphasis is placed on examining the color characteristics of the paint material. Stable quality and correspondence of colors to RAL catalog allowed the producer to occupy the second place in our rating.

    Users speak flatteringly of the quality of the powder coating, its resistance to moisture and temperature extremes. The appearance of counterfeit products on the domestic market is one of the disadvantages.


    • deep tradition;
    • modern technology;
    • Colors match the RAL catalog;
    • resistance of the coating to atmospheric influences.


    • Counterfeit products can be found.

    Akzo Nobel

    Rating: 4.7


    The Dutch company Akzo Nobel is an international concern with plants scattered around the world. The company has representative offices in 80 countries and offers a wide choice of paints. The “Architecture” line was developed for the construction industry, and is used to decorate windows, doors, railings, and other metal parts. Powder coating AkzoNobel Collection Anodik with imitation of anodizing looks originally. This product line includes paints with improved durability and service life. The brand is number three in our rating.

    The advantages of users include a wide range of paints, decorative appearance of the coating. As for the disadvantages, the discontent is caused by weak anti-corrosion capabilities.


    • variety of paints;
    • decorative qualities of the coatings;
    • dries quickly;
    • economical consumption.


    • high prices;
    • insufficient protection against corrosion.


      Rating: 4.6

      MICROP<ul></div><p>” src=”/wp-content/uploads/2023/03/40316666194191-306-.jpg” height=”162″ title=”MICROP</p><ul>“><p>Microp, a young Turkish company</p><ul> quickly gained popularity among consumers due to farsighted policy. The manufacturer has relied on enterprising employees who come up with original formulations. By implementing its own developments with advanced equipment, the company manages to produce a high quality paint. At the same time the brand pays serious attention to the environment, buying only quality European raw materials. paintwork materials do not contain harmful solvents, they are fireproof, which reduces the cost of fire-extinguishing systems.<p>The manufacturer has stopped one step away from the top three. In their feedback the users complain about the poor range of products in the Russian stores.</p><h4>Advantages</h4><ul><li>original formulations;</li><li>modern equipment;</li><li>eco-friendliness;</li><li>fire safety.</li></ul><h4>Disadvantages</h4><ul><li>A modest range in stores.</li></ul><h3><p><ul>ver</h3><p>Rating: 4.5</p><div style=P<ul></div><p>VER” src=”/wp-content/uploads/2023/03/5516666194191-976-.jpg” height=”200″ title=”P</p><ul>VER”><p>One more Turkish manufacturer of powder coatings is included in our rating. Company P</p><ul>ver is well-known in Europe and Russia, though the company has been producing powder-coated paint since 1988. Thanks to constant updates in technology and equipment, the company has quickly taken a leading position on the market. In 1995 the company was certified by ISO 9001, and 20 years later the company received the GSB Master certificate. The range of paints is wide enough, with a series of architectural and automotive materials, products for household appliances and industry. The experts appreciated at face value the environmental friendliness and safety of paintwork materials.<p>Users are dissatisfied with the consumption of powder paint, its corrosion resistance. But the affordable price is an attractive factor.</p><h4>Advantages</h4><ul><li>affordable price;</li><li>modern technology and equipment;</li><li>rich assortment;</li><li>environmental friendliness.</li></ul><h4>Disadvantages</h4><ul><li>high consumption;</li><li>low corrosion resistance.</li></ul><h3>Euro-Decor</h3><p>Rating: 4.4</p><div style=EURO DECOR

      The leader in the powder coatings market in Russia is the domestic company Euro-Decor. Manufacturer has been winning the hearts of demanding customers since 1995. The partner of the company is the well-known Italian supplier EUROPOLVERI. The brand’s catalog offers a wide range of paint products, which are made in accordance with the RAL catalog. Thanks to the developed dealer network it is possible to buy the paint both in Moscow and in provincial towns. Previously the manufacturer specialized in the production of powder coatings for the protection of metal, but today in the range there are low-temperature formulations for wood, plastic, MDF, etc. d.

      P The brand gets into our rating because of its bright colors, resistance to moisture and extensive dealer network. To the disadvantages, users add unstable quality.


      • wide assortment;
      • well-developed sales network;
      • resistance to moisture;
      • affordable price.


      • unstable quality.
      Rate the article
      ( No ratings yet )
      Add comments

      ;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: