Pneumatic nail guns: Features and tips

Nailing pistols, which are also called neurors, are used in various fields: ranging from construction, ending with carpentry and furniture workshops. Despite the relatively low force of scoring, pneumatic neilers are on top of the ratings.

Pneumatic nail guns: Features and tips

The following details are considered their features, models and characteristics.

Pneumatic nail guns: Features and tips

Peculiarities

The nail gun is a device that is used to clog fasteners without the use of physical strength. They are separated by the source of energy on gas, electric and pneumatic (about pneumatic further will be speech) and according to the type of consumables on bobbin, spit-stubble and novels.

Pneumatic nail guns: Features and tips

Pneumatic nail guns: Features and tips

Pneumatic nail guns: Features and tips

Pneumatic scoring tool has the same principle of operation as a novelty device. Despite the fact that the pneumatic neuler is related to the scoring tools, there are opinions that pneumatic tools are charged with brackets, and not nails.

Pneumatic nail guns: Features and tips

With the help of such a device, it is possible to significantly speed up the process of construction or work with a tree, clapboint or other materials.

Pneumatic nail guns: Features and tips

Pneumatic novels have a number of their advantages.

  • Good peak pace of work. In general, ranges from 3 to 5 shorts per second.

Pneumatic nail guns: Features and tips

  • Low cost. Since the operation of the device is based on the use of compressed air, it makes the total cost of a pneumatic tool less than the devices with another power type.

Pneumatic nail guns: Features and tips

  • Impact power. Pneumatic “hammer” can nail nails until the stop with just one strike.

Pneumatic nail guns: Features and tips

  • Easy to operate. For operation of the pneumatic tool is not mandatory receipt of permissive documentation.

Pneumatic nail guns: Features and tips

  • Small weight of the product. During work, thanks to a small weight, the hand does not feel inconvenience.

Pneumatic nail guns: Features and tips

  • Working conditions. The principle of operation and structural nuances of pneumatics are allowed to carry out work in conditions with high humidity or with poor ventilation.

Pneumatic nail guns: Features and tips

    With the exception of the main advantages, the pneumatic novels have some weaknesses:

    • For the compressor, it is necessary to have high-voltage uninterrupted power sources;
    • To communicate the pneumatic tool and compressor, it is necessary to sum up the air hose, which can create inconvenience, despite the fact that it may have a minimum length and weight (in order to avoid it, it is necessary to properly organize a working space).

    Pneumatic nail guns: Features and tips

    Models and their characteristics

    Construction pneumatic neilers are divided into several groups.

    • Devices that are used to work with floor coverings. Device scores at an angle special fasteners.

    Pneumatic nail guns: Features and tips

    • Roofing devices. Apply up to 14 caliber fasteners with a length of 19 to 45 mm.

    Pneumatic nail guns: Features and tips

    • Sheaving neilers. Used for fastening plywood and various sheet materials, use 15 or 14 caliber fasteners with a length of up to 70 mm.

    Pneumatic nail guns: Features and tips

    • Frame neilers. Used for work with large fasteners with 150-200 mm and are intended mainly to collect fraud and preliminary structures, in clippers – inclined, straight and drums with inclination 21 and 34, caliber up to 11, 130 mm long.

    Pneumatic nail guns: Features and tips

    • Finishing neilers. Used in the work of the facades, for installation of plinths or platbands, due to the use of low-length nails without hats, studs or pins, calibers are used to 9 with a length of up to 130 mm.

    Pneumatic nail guns: Features and tips

    • Direct installation devices. Operate when working with concrete, steel and bricks or when fixing sheet drywall, fasteners with a length of 90 mm, 100 mm, or 130 mm applied.

    Pneumatic nail guns: Features and tips

    It should also be noted that various types of nails and studs can be used within a certain caliber and length: smooth, fraught, screw and so on.

    Pneumatic nail guns: Features and tips

    Pneumatic scoring tool is characterized by some basic technical specifications, which should be paid attention to when buying.

    • Drum (fixture for placing fasteners). The weight of the instrument depends on the number of contained nails.

    Pneumatic nail guns: Features and tips

    • The presence of depth adjustment, on which fasteners are clogged (in cases where nails do not need to drive up to the limit).

    Pneumatic nail guns: Features and tips

    • Operating pressure. In the absence of compressed air, the neuler will not work.

    Pneumatic nail guns: Features and tips

    • Fuse from repeated (random) clogs. Provides the ability to work safely and can minimize trauma.

    Pneumatic nail guns: Features and tips

    • Compressed Air Costs – Characteristic affecting tool performance.

    Pneumatic nail guns: Features and tips

    • The amount of air used during operation (for example, no electric motor). The pneumatic nail gun has a small weight (the easiest type of scoring tools), which leads to maximum usefulness of use, as it can come in handy in the works where you need to keep your hand in the air.

    Pneumatic nail guns: Features and tips

    In the rating of the best producers of pneumatic guns included three companies.

    • High popularity has company products Bosch. Relying on the reviews of the owners, it can be noted that the important advantages of these devices are rubber handle and an electronic blow power controller.

    Pneumatic nail guns: Features and tips

    • Also no less popular company model Makita. Despite the fact that they have no amazing performance data, these tools have a reliable design and can provide reliable fasteners of long nails in any solid material.

    Pneumatic nail guns: Features and tips

    • The devices from the company are very high quality “Bison”, which has in assortment all variations of nail hammers, so also models for dismantling brackets and nails.

    Pneumatic nail guns: Features and tips

    Optional equipment

    A feature of pneumatic nail guns is that they need a compressor installation for work. To successfully select the compressor, it is necessary to repel from the characteristics of the working pressure and the cost of air on the shot.

    Pneumatic nail guns: Features and tips

    For neural work, a completely ordinary device with a pressure of 8 bar is suitable. Specific compressor data for each neuror manufacturer indicates instructions.

    Pneumatic nail guns: Features and tips

    Tips for choosing

    Choosing such a device, do not forget that they all have differences in appointment. In this regard, in order to prevent an error in choosing the desired model, it is worthwhile to draw their eyes during the comparison of various options.

    Pneumatic nail guns: Features and tips

    In case you need devices for mounting plywood, lining or other upholstery materials to the doom, it is worth choosing such that equipped with a drum with the highest possible capacity, since there will be a significant amount of fasteners. For fasteners of plasterboard sheets, it is recommended to purchase nails with a zinc coating up to 5 cm long and a hat with a large diameter. With such a type of fastener, any universal (or 2 in 1) pneumopystole can cope, and there will be no need to take into account the power of impact and performance. To more productively mount materials for solid surfaces, it is best to use a gas or powder nail device.

    Pneumatic nail guns: Features and tips

    Due to the exploitation of the tool of this type, high temperatures are created, which arise due to friction during the entry of fasteners to the surface, they will ensure a strong mounting of nails and will minimize the risk of their fallout after a certain amount of time.

    Pneumatic nail guns: Features and tips

    It is also worth considering, with the exception of the main parameters that the design of the novelty pistol has a large number of differences depending on the model. Therefore, in the case of various installation work, the devices should be used, in the design of the driving depth control. In some situations, the design of the desired mechanism is important. In standard fixtures, a jurk switch is used, but for rapid slaughtering, it is recommended to use nailing pneumatic devices that make shots as a result of the pressure on the tip. Also neilers differ by way of supplying fasteners. For example, for extensive volumes of work, it is recommended to use devices operating devices. High accuracy will be able to organize only devices with a single shot.

    Pneumatic nail guns: Features and tips

    You should also know that the pneumatic device for nailing is a very complex type of tool for construction, Do not purchase such a device for disposable use or a small amount of work. Therefore, when choosing a pneumatic slant gun, it is worth paying attention to the goods that have good recommendations, positive feedback on the use and which belong to manufacturers of such devices of popular brands.

    Pneumatic nail guns: Features and tips

    How to use?

    The main construction sections of the novelty pistol are the tool shell and the plunger, which is driven due to the jet of compressed air. The whole principle of operation of this device is performed on a two-stage cycle.

    Pneumatic nail guns: Features and tips

    At the initial stage, the compressed air, which is in the handle, does not fall into the main chamber of the neiler, due to which the impact on the valve, which is in the lid. Due to the compressor, the engine before the shot pumped the required amount of gas into the receiver. After that, gas under high pressure passes through the existing hose in neiler. Using pressing on the trigger stops the supply of compressed gas into the lid. At the expense of the valve, the pressure of the gas jet pushes the plunger – the neiler begins to drive the nails. After the trigger is released, the valve closes when gas exposed, and the plunger becomes initial position.

    Pneumatic nail guns: Features and tips

    The speed of scoring depends mainly only from the skill of the employee.

    Pneumatic nail guns: Features and tips

    Almost all pistols are supplied with a special purpose mechanism that protects the device from unwanted shots (He is called “Putting Clap”). For these reasons, shots are made only at the time of contact of the device with a working surface. Also during the operation of such devices it is worth paying attention to security techniques: To leave the tool during the working pause, install the device for the fuse.

    Pneumatic nail guns: Features and tips

    More about pneumatic nail guns See in the video below.

    Rate article
    ( No ratings yet )
    Share to friends
    Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
    Add a comment