Plasterboard lift: how to choose, make it yourself

When carrying out the walls of the walls, and especially the ceilings, the plasterboard complexity represents the rise and retention of the fragments of the material at the height, since its sheets have a weight from 7 to 9.5 kg. For this, you need a special mechanism – a lift for drywall. To purchase a ready-made adaptation, you need to know how to choose it, because the manufacture of your own hands is possible only at certain skills.

Drywall lifting: basic functions

The main task of the device is to facilitate the work of the wizard when the ceiling is trim large sheets of GCL. With it, he can cope with the workflow one, without an assistant, even if you need to build a multi-level drywall ceiling. Considering that the lift raises the sheets of coverage to the height of up to 4, 5 meters, this is quite enough for medium and high rooms.

The design consists of a rack placed on the supports, From her, a special rod is put forward for the desired height. At the top there is a pinned winch knot (automatic or mechanical). In order to put plasterboard sheets by an edge, on the retractable part there is a rotary frame with retainers. The principle of operation in most cases is based on the cable transmission.

However, this is not the only purpose – the homemade mechanism can help when conducting other important work:

  • Having installed a laser level on it, there is the possibility of accurate, high-quality ceiling markup, corners;
  • The lift is used to raise air conditioners, ventilation air ducts, heavy chandeliers;
  • The device helps when mounting a frame of metal profiles under GLCs in impudent places – it reliably fixes the details while they are fixing.

In addition, using a lift, you can raise rolled coatings upstairs and fix the perforator on it, which is extremely convenient in working conditions at height.

Thanks to this simple device, it is possible to calmly fix the material without any special difficulty, and the installation time is significantly saved.

Types of devices

Specific use depends on the type of construction.

Three main types differ:

  1. Entrepreneur with a vertically installed rack, designed for the assembly of wall coatings and sewing partitions.
  2. Ceiling mechanism with vertical table for fixing plasterboard on the ceiling.
  3. Universal Premix Design. It allows you to alone to build drywall both for walls and for ceiling. If necessary, you can change the angle of inclination using the swivel table.

The factory mechanism has the following advantages:

  • One person will cope with simple control;
  • The construction is not exposed to dust and contamination;
  • raises the GLC plate at different angles, vertically and horizontally;
  • The mechanism of the team has a small weight, in a compact form it is easy to transport.

If there is a lining of a small room, the device is folded, due to which the reference area is reduced. At the same time, the supports are adjustable, so the application is relevant on the uneven base of the floor.

In some cases, the strut lift is used. It is a construction consisting of two telescopic tubes, rod for the rise, as well as clamping and stops from the rubberized polymer. To disable the fixation of the rod equipment equipped with a lever. The strut allows retaining plasterboard plates vertically. Of the advantages of structures, you can allocate low weight, rolling base, the ability to work with walls and ceilings.

The area of ​​use of a conventional design is residential rooms, Production workshops, balconies and corridors. Use such a model recommended with ceiling heights more than 3 meters.

How to choose?

Selecting the desired technique, it always makes sense to familiarize yourself with the possibilities of equipment.

In the first place are the following criteria:

  • The weight with which the mechanism works, it can range from 30 to 50 kg;
  • Considering the size of the ceilings, you should ask for what height is the delivery of plasterboard sheets.

It is necessary to know that such devices work only on the rise and cannot move goods.

Evalnamed strength and foundation of the design itself:

  • Details of the internal mechanism and components must be made of durable and durable materials, therefore it is always better to choose steel models without polymer additions;
  • Reliable base configuration is a guarantee of the stability of the lift, in this respect the most worthy is the rack in the form of the letter “H”.

Cheap models raising drywall above 4 meters can be quite suitable for ordinary housing. If the coating is required in difficult areas, it is planned to various fasteners, and the optimal strut will be the best option. It has a more complex design and thanks to this can be configured for diverse tasks. True, such functional models are much more expensive than standard.

In addition, you need to take into account the auxiliary options that are not always needed when mounting GLC. But if available, the price of the device is significantly increased.

Since there are manual models and with an electric drive, choosing an electric technique makes sense with large amounts of work. It helps to increase the rate of assembly, but it costs more. According to professionals, for irregular construction work it is better to choose manual structures, especially since they are not so often failed.

Independent manufacture

On average, standard lifting equipment costs about 15 thousand rubles, and many prefer to assemble the device with their own hands. However, it will take detailed drawings for this, on the basis of which you actually mount the lift of any type at home. Also, in addition to metal products, you will have to get a winch and fasteners.

Professionals advise to do a one-time version, which can later be easily adapted for other rooms. On the other hand, you can make a reusable design that will be suitable for different room heights.

Carefully compiled scheme – the key to high-quality lifting assembly, because it will be for it to mount the backup of metal profiles and other works.

Installation process:

  1. The bases are made of metallic profile of 6×6 cm. A pair of segments is supplied with reverse rotary parts, the third profile is fixed to the rack using a welding machine. For convenience of movement equipped with rollers or wheels.
  2. For greater stability, three or four pipes in the form of cut feet weld.
  3. The telescopic tripod or tripod is made of three circumcised profiles with a sectional size of 0.4, 0.6, 0.8 cm. To insert the stoppers, they make a perforation that should coincide. The rod is fixed on the rack.
  4. The top of the tripod is supplied with retainers for quick fastening of the stand. Metal “H” The shaped frame is welded at the top of the tripod for further mounting the retractable device.
  5. The table is placed on the platform, the lateral supports that increase the rigidity of the structure are additionally mounted. Lastly Introducing the winch, blocks and cables.

      To date, the best recognized German equipment “Knauf”, French lifts from the company “EDMA”. This is high-quality installation equipment in large and small rooms with different ceiling heights.

      However, the most popular adaptation continues to remain technique “Premos” For mounting plasterboard. Her device resembles the simplest roth jack, allowing to raise a car for repair. Due to simplicity and reliability, as well as an affordable cost, this brand remains in the first positions for a long time.

      How to make a lift for drywall, look in the following video.

      Rate the article
      ( No ratings yet )
      Add comments

      ;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: