Overview of the DVP panels

All people wishing to make their own home beautifully, you need to know what it is – DVP panels. It is necessary to find out how the selection of moisture-resistant decorative panels with a drawing under the tile and brick, other species. Equally important to consider the features of specific types and installation recommendations.

Overview of the DVP panels

Overview of the DVP panels

What it is?

Talking about the DVP panel should start with the fact that it is an important type of sheet building materials. For its production, waste waste production is recycled. Processing procedure involves the impact of the press hot. DVP cannot be considered a very new material – the release of such structures began almost 2 centuries ago. Production on modern “wet” technology without any changes are already undergoing over 50 years.

Wood mass initially have to rinse. The standard sequence of work implies first removal of impurities that can be performed mechanically. Remove metal debris helps the separator.

Chip crushed into small fibers. In the thus prepared mass, polymers, paraffin and specially selected resins with adhesive effect are laid. The advantage of the “wet” technique is that the substance will contain less harmful components.

    Overview of the DVP panels

    Overview of the DVP panels

    Varieties

    The main graduation of leaf chipboard is the degree of their hardness. The softened version due to the low density and the porous structure is very easy, almost does not let heat. The usual thickness varies from 0.8 to 2.5 cm. Density in different versions range from 150 to 350 kg per 1 m3. In appearance to recognize such a material is easy – the edges are brewing; High Software Panels Unstable to Moisturizing.

    Especially soft plates are used mainly in construction. They perform a good selection of GLC and perfectly strung out. Such material is relatively suited and therefore popular among consumers. Transportation of softened Fiberboard does not cause problems.

    It is used for both finishing and plating under floor covering.

    Overview of the DVP panels

    Overview of the DVP panels

    Overview of the DVP panels

    Semi-rigid slab is not so flexible. Its mass is usually 850 kg per 1 m3. The thickness of the layer is most often 0.6 or 1.2 cm. Such structures are widely used to obtain the rear walls of the furniture. Of course, it is possible to put them and under the facial floor covering, as well as use for assembling boxes, transport boxes.

    In tight fiberboard, density depending on the brand can be from 800 to 1000 kg per 1 m3. Plate thickness relatively small, not more than 6 mm. Preferably they buy them to make shield doors. Furniture production also uses this material, but only as the rear walls of some cabinets. Along with glossy and matte specimens, there are still modifications that reproduce the view of natural wood (this is especially decorative type).

    Particularly tough (or, as experts say, super-sung) Fiberboard formation has a density not lower than 950 kg per 1 m3. Simple pressing does not allow to achieve such an indicator. To the working mixture, it is necessary to add petection. Maximum rigid panels are used to assemble doors, arches and interior partitions. Flumbing plates can become an excellent flooring; And thanks to dielectric properties, they are valued when assembling electrical shields.

    Overview of the DVP panels

    Overview of the DVP panels

    Made wellms highly appreciate laminated fibrous stove. On top of the main array of fibers there is a layer of synthetic resins. It is able to reproduce a natural wood surface. And also encounter options painted in a specific (for example, white) color. Additionally allocate gradation by type:

    • sheet;
    • tile;
    • trimmed under the lining.

    Tiled panel is small. It is sold in a format of at least 30×30 and no more than 100×100 cm. On the ends are cut-grooves. Such blocks can be ceiling, outdoor or installed on the walls. The imitation of the lining is also mounted using spike grooves; This is a moderately moisture-resistant design that is installed in a short time and is almost not working in contrast to natural wood.

    Overview of the DVP panels

    Overview of the DVP panels

    Quite often there are options:

    • under the brick;
    • under the tile;
    • under a stone.

    In many cases use perforated fiberboard. This is an economical option compared to other types of plates made with perforation. In most cases, the surface is painted into light colors, which radically increases its attraction. The product will look original even in a private house.

    As for the sandwich panels, they are produced in our country since 1974; Many copies are made with a pattern, and it immediately increases their attractiveness.

    Overview of the DVP panels

    Overview of the DVP panels

    Overview of the DVP panels

    There are other classifications:

    • stove with rough surface;
    • stove with a non-impedited facial layer;
    • Plate with an improved facial layer;
    • product with decoration on both sides;
    • smooth with one or both sides blocks;
    • Products with facing;
    • products painted;
    • Laminated products;
    • 5 levels of slab in the intensity of formaldehyde emission outward.

    Overview of the DVP panels

    Overview of the DVP panels

    Overview of the DVP panels

    The choice of appearance depends entirely on the preferences of the owners. So, imitation of brickwork is most relevant in the Loft style or in the urban room. Frequently practiced accent design, contributing to the setting. Special visual difference with natural bricks is impossible to see. In this case, the design is obtained noticeably easier and mounted without dirty, wet processes.

    Colorly look at the panels that reproduce the view of the stone. This is a completely natural solution that only a few people can afford – so why refuse at least from his external similarity. “Stone” plates harmoniously fit into a variety of design destinations. They will definitely create a feeling of comfort, harmony and disadvantageous stability. It is impossible to ignore the fact that difficult installation work will be required.

    Overview of the DVP panels

    Overview of the DVP panels

    Genuine classic, however, is the use of wood imitation. In the budget class, this is achieved by applying polyvinyl chloride films. Such coating and protection will provide, and the appearance of rocks will transmit. Less profitable economically, but more practical use of veneer. It is generally impossible to distinguish from the “real” wood.

    Panels, reproducing the type of tile, are relevant in the finishing of kitchen zones. Sometimes there are even apron. Install similar products easy. To clean, just use wet matter.

    Overview of the DVP panels

    Overview of the DVP panels

    Installation Tips

    You can set the wall panel by various methods. It is often believed that it is easiest to put it with glue. But an indispensable condition is the perfect surface alignment. Only subject to this requirement, the work will be quick, and its result will continue for a long time. Sometimes the elimination of all interfering defects takes a lot of time.

    Of course, before sticking the panels it is necessary to remove not only the entire old material, but also stains of fat, dusty and dirty places. The substrate is ground twice, leaving the time for drying. Otherwise, adhesion is not provided.

    When it is done, you can cut the units for the wall size.

    Overview of the DVP panels

    Overview of the DVP panels

    Glue lubricate the rear surfaces of the panels and glued to the reserved place. You can apply the adhesive mixture both point and zigzag. Maximum attention should be paid to the edges. Since the panels are heavy, it is possible to ensure normal operation with the involvement of assistants. Marking is performed using level and plumb.

    Installation is also distributed with nails, screws. The second fastener type is preferable.

    Overview of the DVP panels

    Overview of the DVP panels

    Important: The use of hardware does not mean that you can refuse to align substrate. Mounting to brick, concrete walls are made with a dowel. Screw the fastep in the stone “in pure form” means to increase the risk of disintegration.

    Compensate the irregularities of walls without excess finishes helps the use of crate. The frame will also help cover wiring and other communications. There can also be put and insulation. The useful space in the room, however, will be taken away – and it can hardly be considered a plus. Fixation of the panels themselves are performed by nails or self-drawing.

    Overview of the DVP panels

    Overview of the DVP panels

    How to choose?

    Purchase DVP for the bath or in order to issue an apron for the kitchen will deliver much more joy if you apply laminated solutions. They are much more resistant to water intake. It is equally important to carefully study the technological parameters of the structures and find out whether there are quality certificates. In the materials must be noted information about the passage of sanitary control. This is especially important for the decoration of the residential room, bath and kitchen.

    In residential premises it is impossible to use any products with increased formaldehyde emissions. Invalid the presence of mechanical defects, bubbles. And also it is impossible to allow the presence of spots of oil, paraffin. Packaging should be supplied as an informative label as an informative label. For the ceiling it is necessary to choose the most lungs, and for furniture – the most durable modifications.

    Overview of the DVP panels

    Overview of the DVP panels

    About how to cut the DVP smoothly, look in the following video.

    Rate article
    ( No ratings yet )
    Share to friends
    Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
    Add a comment