Matte paint: pros and cons

Matte paint: pros and cons

Starting repair work in an apartment or private house, any owner wants to interior a kind of highlight. Today, matte paint is in great demand for all sorts of planes, which, when interacting with other decorative materials, allows you to embody the most bold design ideas.

Positive and negative sides of frosted paints

Matte paints are applied in the interior no less than glossy. Say which one is better in composition is impossible, as each intended for the embodiment of certain decorative functions. However, you can note A number of advantages of matte compositions:

  • saturated color;
  • good coating density due to which the previous layer is easily painted with 2-3 new layers;

Matte paint: pros and cons

  • lack of glare from artificial and daylight;
  • rough structure that allows you to hide small visual flaws of walls and ceiling structures;
  • In tandem with satin planes allows the volume of the room.

Matte paint: pros and cons

Matte paint: pros and cons

Among the negative sides of the matte paints is to highlight:

  • Dust is quickly accumulated on the rough surface;
  • requires careful daily care with the use of specialized funds;
  • On the finished coating, any flaws are clearly visible: scratching, scratches.

Matte paint: pros and cons

Features of paints and varnishes

7 main paint coatings are isolated for internal interior finishes, which in finished form are a matte surface.

  • Paintsbased on water emulsion. Used for processing ceiling and wall plates from drywall and mineral raw materials. The main advantages of paints of this type: acceptable price, rapid drying.
  • Mineral paints. As their foundations, harated lime or brick apply. The structure is similar to whitewash, so mineral paints are mainly used as ceiling coatings. The price is democratic, but the solution does not make moisture and washed off with simple water.

Matte paint: pros and cons

Matte paint: pros and cons

  • Silicate paints. According to the composition similar to the previous type of paint coating, but their basis is liquid glass. Due to this, silicate paints have an increased coefficient of moisture resistance.
  • Paints with plow. The basis for them is a polyvinyl acetate emulsion. Such formulations are used to process walls and ceilings in warm dry rooms. After drying the solution on the plane, a homogeneous vapor-permeable film appears.

Matte paint: pros and cons

Matte paint: pros and cons

  • Acrylic paints. Produced from polymer acrylic resins. Moisture resistant, have a good opposing ability to abrasion. Applied for staining of planes from different materials: metal, drywall, wood, brick, concrete.
  • Latex paints. Produced from acrylic resins and artificial latex. They have high coefficients of moisture resistance, can be used for painting bathrooms, toilet rooms, and other rooms where moisture accumulates.

Matte paint: pros and cons

Matte paint: pros and cons

  • Paints with silicone. The most expensive of all of the above painmarket coatings. Silicone resins are used for their production. Paints are distinguished by strength, elasticity, moisture resistance, capable of repeating pollution, so often used for the bathroom, for kitchen, as well as other spaces with high moisture levels.

All described compositions will quickly dry, almost odorless, are environmentally friendly (do not contain toxic substances).

For staining small parts, surfaces of a small area and plastic elements It is recommended to use aerosol paints in the cans. They contain a solvent that makes the upper surface layer softer and, thereby, provide good grip.

Matte paint: pros and cons

Matte paint: pros and cons

Where to apply

Matte paint is ideal for premises, which are often exploited: public buildings (hospitals, offices, cafes, shops, audience of educational institutions), as well as for residential spaces (bedrooms, hallways, children). Matte paint is better to apply in cases where the condition of the surface covered is far from the ideal (especially relevant for indoor doors, walls, ceiling). Thanks to the ability of matte paint to dispel the light falling on the painted surface, you can easily hide all flaws and irregularities.

Matte paints are used by designers when creating an interior of apartments much more often than glossy. They are look elegant, suitable for any premises, Including for a spacious, well-lit living room.

Standard matte paints of the average price category have a low stability threshold for erasure, so expensive coating options should be selected for the premises of increased pollution.

Matte paint: pros and cons

Preparation of the surface to staining

Before applied to the surface of paint, you need to eliminate visual defects.

  1. If there are obvious damage on the surface and a strongly noticeable curvature of geometric proportions, it is necessary to align the surface to the starting putty, the thickness of the layer of which should be at least 30 mm.
  2. Cracks and dents can be hidden using the finishing putty, which must be applied evenly with a thin layer on the entire surface.
  3. When all surface leveling work is completed, small roughness can be eliminated by fine-grained emery paper.

Matte paint: pros and cons

Matte paint: pros and cons

Prior to the use of putty on materials from mineral raw materials, the latter need to be treated with primer to close the pores and provide high-quality clutch.

Basic paint or land can be used as a primer.

The primer will protect the surface from dust, improve the clutch, will not require the application of several layers, will ensure uniform absorption of paint, and therefore – the homogeneity of the color and the long service life of the applied coating.

Matte paint: pros and cons

Stages of coloring

Applying matte paintwork coatings on technology does not differ from working with other types of paints. Surface staining can be done by hand – a wide brush or roller for painting works, as well as using mechanical means – compressor or collapse.

Surfaces that are not needed, it is necessary to close with polyethylene, newspapers or painting scotch.

First you need to paint hard to reach places. Then go in a circle, starting from the long corner of the room.

Matte paint: pros and cons

Matte paint: pros and cons

Operactions for interroom devices and windows is better to cover using a narrow brush. In order not to spoil the glass, it needs to be sealed with paper tape or coat with a solution from the household soap.

Surfaces of a large area (ceilings, walls) It is better to paint a velvety roller on a long handle.

After the end of work on coloring, it is necessary to immediately wash your hands and a greasy tool in warm water with a cleaning agent. Any types of matte paint (deep, half-one) of all colors (black, red, blue, white, gray) in the form of an aerosol or brushes applied with the brush are well washed until they dried.

More specifically how to properly paint the walls of matte paint, you will learn from the following video.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment