Litokol glue: Specifications and scope of use

In order to make high-quality repairs, it is necessary to accommodately approach the choice of not only finishing materials, but also related goods. When cladding the surface with tiles or mosaic it is extremely important to use high-quality glue composition. The glue of the Italian brand Litokol is very popular with buyers in more than 90 countries of the world, due to the high technical characteristics and extensive areas of use.

Properties

Italian company Litokol specializes in the development and production of adhesive compositions for mosaic, tile, porcelain stoneware, as well as natural stone tiles. During production, raw materials are only the highest quality, which allows you to get glue with excellent technical characteristics. Under the Litokol brand there are several modifications of adhesive mixtures, each of which has its own qualities.

Speaking about the general properties of materials, the following points can be distinguished.

  • Safety for health. In the manufacture of glue mixtures, Litokol does not use harmful components, so the finished product is absolutely eco-friendly.
  • High level of adhesion with almost all types of foundations. The adhesive composition allows tile to bite even such complex bases as wooden and plastic surfaces.
  • Excellent levels of resistance to moisture and water. LITOKOL Material Line Also there is a separate look of the mixture for decorating pools tiles.
  • Resistance to high and low temperature, as well as to the sharp differences.
  • The mixture has good elasticity indicators.

Varieties

Under the Litokol brand produced a large number of diverse adhesive mixtures.

All formulations can be divided into three main groups:

  • mixtures on a cement basis;
  • acrylic dispersion mixtures;
  • Epoxy jet composition.

Each adhesive group has its own characteristics. Cement formulations have the widest range. Mixes such as Litokol X11, HyperFlex K100, HyperFlex K100 and Litoflex K81 are used in extremely popular due to its versatility. Such adhesive mixtures are distinguished by rapid hardened and no shrinkage. Cement-based materials have a low cost compared to other modifications of the Litokol product.

It is worth noting that a small price is not reflected on the quality of glue: the technical characteristics of cement mixtures are not lower than that of other compositions.

The material can be used both inside and outside the premises, withstands harsh temperature differences and impact of atmospheric factors. Cement mixtures are produced in dry form.

Dispersion mixes are presented by two products: Litoacril Fix and Litoacril Plus. Formulations are available in the form of a paste-shaped white mass, ready to apply. The material has a fairly wide range of operating temperatures, which ranges from -30 to +90 degrees. The mixture is not afraid of direct contacts with water and does not absorb it, which allows the use of this glue in rooms with high humidity.

The tile glue based on epoxy resin is mainly used for cladding tiles of complex bases. The composition is characterized by high strength and resistance to mechanical loads, so ideal for laying tiles in places with a large crossway.

Tips for choosing

Thanks to the wide range of Litokol adhesive mixtures, it is possible to choose the appropriate composition for any task. When choosing, the following factors should be taken into account:

  • place of finishing works: inside or outside the room;
  • Type of base: horizontal or vertical surface;
  • Materials from which tiled coating and base are made.

Buying material, it is necessary to carefully examine the technical characteristics of the composition indicated on the package, which will determine its purpose and properties. You can also pre-familiarize yourself with the reviews for various modifications of Litokol glue.

Interior decoration

For work indoors, you can use both universal glue mixtures Litokol and special purpose compositions. As a rule, special modifications of glue for internal works are made of the most environmentally friendly raw materials. If a cement-based formulations are used, it is desirable that when preparing a solution, the amount of dust released was minimal. The categories of the Nephole materials include mixtures of Litograes K44 Eco and Litoflex K80 Eco.

For street work

To finish facades of buildings, sidewalks and a porch, it is necessary to choose compounds that have good resistance to weathering and temperature differences.

It is also worth paying attention to the mode of operational parameters of the mixture. Compositions for outdoor work must withstand the effects of high temperatures, and also have frost resistance. For example, it is such a mixture as lITOKOL K17, Litoelastic, Litoplus K55 and Litofloor K66.

Complex bases

The surfaces can be attributed to the surfaces that during operation will be subject to significant mechanical loads, as well as some materials: wood, iron, plastic, asphalt, old layer of decoration, warm floor. For this purpose, the two-component composition of Litokol Litoelastic, thanks to its versatility.

This mixture has high adhesion to any reasons, does not have shrinkage and is highly resistant to the negative impact of external factors. The glue is not afraid of water, as well as resistant to vibrations, so it can be used in elevators or on the staircases. For decoration of a system of warm floors, a glue composition can be used Litoflex K81.

Also for working with some complicated bases, a dispersion mixture is well suited Litoacril Plus. With this composition, it is possible to lay a tile laying on the surface, which are subject to deformation, wood panels, as well as on the old finishing material (for example, on tile or paint coating).

Wet premises

In rooms with a high level of humidity it is necessary to use only those compositions that have water-repellent qualities. Among the various adhesive mixtures Litokol you can find a lot of suitable options for decoration of bathrooms and pools. For example, mixes Superflex K77, Litostone K98, Litoflex K81, Litoplus K55, as well as dispersion formulations.

Various materials

Lightokol adhesive mixes are widely used for tile facing surfaces. However, some modifications of glue allow to work with other materials. Acrylic-based Litokol compositions are widely used for fixing various sound and thermal insulation materials.

Betonkol K7 is used to form walls and partitions of brick, cellular concrete, foam blocks and other materials. Also, this composition can be used to equalize surfaces. Some glue mixtures Litokol can be used to masonry marble and other natural stone, including large format.

Features of application

Each type of adhesive mixtures Litokol can have its own features of application. For this reason, before starting work, it is recommended to familiarize yourself with the instructions that are indicated on the packaging of the material.

Surface preparation

To work with any composition it is necessary to prepare the surface. It should be smooth and clean. If it is necessary to lay the tile on the floor, it is necessary to wait for the complete drying of the cement-sand tie (about 28 days from the moment of formation). It is allowed on the surface of small irregularities (not more than 0.3 cm).

After stripping and degreasing the surface, the base is recommended to be treated with a primer water repellent composition. Before applying the adhesive mixture, the primer must completely dry.

Application

The adhesive composition is not applied on the entire area of ​​the treated surface immediately, but only on its small part. The glue layer should be uniform, for this, the mixture is distributed using a metal spatula, after which it affects it with a toothed ironing. The tile material is stacked on the treated surface and attached well.

After laying the tile for one day, the glue composition should be securely protected from direct contact with water. Subsequent week, the surface must be protected from the effects of minus temperatures and direct sunlight.

Tips and recommendations

When working with some types of bases and adhesive compositions, certain difficulties may occur. When buying a material and its use is to remember a few moments.

  • It is not recommended to use cement formulations for plaster surfaces, as these materials poorly interact with each other. Alternatively, there may be to prevent their direct contact. To do this, before applying glue, plaster bases are subject to mandatory priming.
  • Before laying a glass mosaic to the surface of the pool or fountains, the base must be treated with a mixture of cement and sand in order to perfect alignment.

  • It is always necessary to take into account the speed of the frozen of the used Litokol glue, since after forming the film on the applied composition, it will be possible to glue the tile on this site only after applying a new layer. It is worth remembering that drying time may vary depending on the temperature and humidity modes. For example, under the right sunlight and under the influence of dry wind, the process of smashes glue will be faster.
  • When working with glue mixtures Litokol, tile does not need soaking in water.
  • If it is necessary to bile the surface tiles, which will be subjected to large mechanical loads, the adhesive mixture is recommended to be applied both on the base and on the reverse side of the tile.

How to properly apply glue on the tile, look in the video below.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: