How to use diluent for acrylic paints?

Among paints and varnishes today, acrylic paints received widespread. Their components are water, color pigment and binders. The surface dries quickly and has a number of useful properties. If the prepared paint volume is not used immediately, there is a need for diluents. Choose and apply them should be especially careful.


Acrylic paint diluent is often confused with its solvent. Errors in the use of these substances will not allow to achieve the desired effect. Dissolving mixtures are designed to make the frozen paint softer, simplify its removal from the surface. The properties of the coating over time are inevitably deteriorating, drying time increases. Diluents for acrylic paints are designed to influence the decendment of the dye, they accelerate the drying process and increase the practical quality of the dye, sometimes increase color saturation. Often diluents and solvents confused even professional merchants.

Need to carefully study the label, instructions and accompanying documents.

Than dilute?

Since water includes water, it is permissible to add water to small portions. However, it will have to take only clean and not containing any foreign components. Drinking paints are bred using building mixers in a special capacity. When it is supposed to use the whole mixture at once, it is bred in branded package. Liquid pour into small portions, otherwise the LKM can become too liquid.

We will have to put up with the weakening of color saturation or introduce additional pigment portions to the paintwork.

An alternative is the use of diluent: Such mixtures today are released in a wide range. The coating when using them becomes better, dries faster. Depending on the type of diluent, it may acquire a matte or glossy shades. Diluents have a pronounced smell, but it easily passes, as soon as the mixture dries.

How to dilute water?

Before starting work, you should find out whether liquid is clean. Enjoy hot water to dilute paint categorically unacceptable.

Consider typical proportions used by experts:

  • 1: 1 – when it is required to prepare the base layer (moderately thick and evenly stacked);
  • 1: 2 – When you need a texture that does not spread and is conveniently recruited on the brush or rollers (gives a thin layer of paint);
  • 1: 5 – the original color is almost lost, therefore it is necessary to introduce large portions of the pigment (such a mixture must be used according to figure and small surfaces);
  • 1: 15 – This breeding helps to create a sensation of the blurred color shift between the full paint in different places.

How to use diluents?

And in artistic, and for construction purposes, acrylic paints are diluted by approximately the same technology. When the temperature is low, the paint itself is poorly held on the surface, the diluent will help correct the position. It is necessary to use the compositions of the universal series when it is carried out in room temperature. Preparations that differ in low evaporation rate allow you to apply the coloring composition with significant heating.

Storage of the diluent must occur taking into account the instructions. The container is covered with a lid as close as possible and put vertically in a dark cool place.

Diluent acrylic “Chemist” Can be used to breed automotive enamels with pearl and metallic effect. With it easily remove acrylic pollution from the surface of the painting tool.

Diluent Tamiya effectively copes with the most different acrylic paints. Compared to conventional solvents it is much better. This composition not only helps to dilute the dye without loss of quality, but also safer for health. Fully hardened paint sticking in a thick lump, easier to throw away: it will not give any benefit.

From the following video, you will learn how to distribute acrylic paints for an airbrush.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: