How to mount the MDF panels?

MDF panels are a popular and attractive material that is perfect for interior decoration of almost any premises. With the help of such a cladding, you can transform the situation by making it more presentable and aesthetic. Today we will understand more about how to fix the MDF panels.

Peculiarities

MDF panels – this is a sought-after finishing material, which is made from woodworking waste. Many consumers mistakenly confuse them with chipboard or fiberboard panels. And these are completely different materials, as MDF is more durable, reliable and environmentally friendly, since additional chemical means are not used in the process.

As glue in the MDF, there is a component as lignin, which is present in the composition of wood. It is allocated as a result of high temperatures.

MDF lists have a characteristic fault that resembles felt, which consists not from woolen, and from wood fibers. As a rule, the MDF panels are attached to one or another bases for conventional liquid nails and other quality compositions. Thanks to the large selection of adhesive products, consumers may pick up a mixture that will approach the color panels.

Modern MDF panels are distinguished by the fact that they can be installed independently, not attracting specialists. Even inexistant homemade master can easily cope with such work. The main thing, stick to the simple instruction, as well as purchase high-quality tools / materials.

Pros and cons

MDF panels have their advantages and disadvantages.

To begin with, consider in more detail what kind of finishing materials are good.

  • MDF panels are an environmentally friendly and absolutely safe finishing material. There are no harmful chemicals and toxic adhesive components. Thanks to this quality, such materials can be safely used in any rooms.
  • High-quality MDF panels are fairly easily attached to the walls, because they are perfectly held initial shape. They are very rigid, which positively affects their strength characteristics.

  • Such a finish is distinguished by durability and wear resistance. MDF panels are not easy to damage or break.
  • MDF panels are materials on which mold and fungus do not start.
  • Such finishing materials are not terrible dampness and moisture. This is explained by the fact that there is a special laminated film or plastic on the surface of the panels.
  • Similar wall cladding is practical. Dust and dirt do not accumulate on MDF panels. If dirty stains will appear on the finishing surface, they can wipe them with a damp cloth.
  • These finish materials can be blocked and cut off, if necessary. In addition, from MDF panels can be formed original curvilinear figures.

  • With the help of such panels, you can make the room warmer, as they have good heat insulating properties.
  • It is impossible not to note the beautiful appearance of such a finish. With the help of MDF panels, you can make the interior richer and solid.
  • Such a decoration can be mounted both in private country and wooden houses and in urban apartments.
  • The design of the walls with such panels are relatively inexpensive, especially if you compare it with a facing with natural wood.

Of course, the MDF panels are not the perfect finish materials. They have their weaknesses.

  • If there are poorly treated edges in such cloths, they can absorb dampness and moisture, and then swell and deform. Fix such defects are unlikely to succeed. That is why it is not recommended to use such covers in the decoration of the bathroom and kitchen.
  • MDF panels are quite durable, but they still can be damaged. For example, with a strong blow to a fist, such a material can crack, because it does not have sufficient elasticity.
  • If condensate can be collected on overlaps, then the MDF panels cannot be installed on them, since they do not have increased moisture resistance.
  • MDF panels are flammable materials. Wiring elements and various cables are recommended to hide in separate boxes. You can apply an additional insulating layer of mineral wool.
  • Assortment of such finishing materials is difficult to call rich. The choice of shades and textures of MDF panels is quite modest.

Types of panels

There are several varieties of MDF panels. Each of them has its own distinctive characteristics.

All-paced

Such panels are the most common. They are canvases having a perfectly smooth surface on both sides. Machine panels are made by pressing the wooden mass under high pressure and under conditions of high temperature modes.

Laminated

The second most popular is laminated panels. They are also produced, as well as all-refined, but at the final stage, their front side is covered with the thinnest polymer film. As a result, it turns out a full protection of the foundation from mechanical damage and other adverse factors.

On such panels there may be a film of different colors. That is why laminated panels are the most diverse in terms of choice. Such coatings look at the walls attractive and aesthetically. They can be used in the settings of various styles.

Moisture-resistant

Similar MDF lists are made of dense and durable materials. Only high-quality and eco-friendly materials, such as natural wood apply in the production of such products,. It for a long time is pressed under high temperatures. Ordinary MDF panels can not boast sufficient moisture-resistant characteristics, so they are not recommended to install in rooms such as bathroom or kitchen. An exception to this rule is the only indicated moisture resistant sheets that are quite admissible to decorate such areas.

Veneered

These panels are distinguished by the fact that they have attractive wood textures. For the repetition of natural raw materials on the surface of the draft sheets, a thin veneer is stacked consisting of a natural tree. The thickness of this element, as a rule, is no more than 3 mm. Most often, veneered panels imitate oak, ash and other noble wood breeds. Such finishing materials are very popular, as they look rich and are pretty wear-resistant.

Glossy

Similar types of panels have glossy surfaces. They are made by lamination of the frontal part of the sheets with a transparent polymer film film. Such materials are distinguished by a beautiful glossy glitter.

Painted

Similar MDF panels are rightly recognized by the most common. They are created in this way:

  • A special coloring composition is transferred to the draft basis;
  • It lines all the drops on the panel;
  • Special paint forms a glossy or matte tint.

Scope of application

Wall trim panels is inexpensive and aesthetic. Of course, if you wish to give the room a more luxurious image, then you better turn to expensive options from natural wood. MDF panels are rarely used in the design of the living room in a private house. As a rule, they are used to clamp an accent wall, for example, at a mild corner or TV. Similar materials are more common in solid cabinet conditions. In addition, MDF lists are used in the finishing of office space or spacious corridors.

As for ordinary city apartments, the MDF panels will be able to meet even in a toilet or bathroom. Of course, for such spaces, you can use exclusively moisture-proof material. Otherwise, the sheets will swell and deform, forever losing the external attractiveness.

MDF canvases permissible to sew a balcony block or loggia. With such a finish, such spaces can purchase more “alive” image, especially if you add them with suitable lighting devices and a couple of chairs / chairs. Of course, for such conditions it is better to acquire more reliable and wear-resistant materials. If your balcony is open and uncrowded, then instead of MDF panels it is better to use another facing.

Such finishing materials look good in conditions of the hall or bedroom. As in the case of private houses, here most often MDF panels are stacked on accent walls, such as the bed or sofa.

Often, such finishing materials are used in the facing of the hallway. Designers are recommended in such conditions to set the brighter panels so that the space does not seem too close and “grace”. Some owners are combined in the hallway materials imitating wood and stone masonry. In a single tandem, such a designer solution looks very beautiful. MDF panels are often separated not only the walls indoors, but also the ceilings. In addition, from these popular materials, you can build a beautiful edging of the door or window opening, an elegant arch, slopes and even to strip the door, attaching a beautiful lining to them.

Many consumers use MDF panels to transform the old entrance door. Special linings are sold in stores that completely hide the old door leaf.

Very beautiful MDF panels look in the conditions of attic. In such premises, these materials can also be separated and walls and ceiling.

MDF panels are also used in other fields:

  • in the manufacture of advertising shields and signs;
  • they produce mobile houses and mobile facilities;
  • MDF panels are suitable for creating shelves, cabinets and racks;
  • from these materials produce enclosures of musical instruments;
  • MDF sheets are used in the manufacture of columns, rates of radio receivers, gearboxes.

Tools

Before proceeding directly to finishing work, you must prepare all the necessary tools.

For cladding of walls, MDF panels will be needed:

  • electrolovik;
  • Construction level (laser or bubble) and plumbing;
  • roulette;
  • Metal ruler;
  • Special Construction Corner;
  • pencil or marker;

  • electric drill;
  • screwdriver;
  • Simple screwdriver;
  • pliers;
  • a hammer.

And also need to stock fasteners (dowels, kleimers, screws).

Preparatory work

If you stored all the necessary tools, you can start preparatory work. The walls on which you are going to install MDF lists should be perfectly dry.

To facing it is impossible to start if:

  • At the ceiling there are raw or wet areas;
  • on the surface of the base is messenger;
  • On the walls, traces of formation of fungus or mold are viewed;
  • The upper layer of overlapping is destroyed.

If there are no such defects on the wall overlaps, they can be safely prepared for future facing.

  • Remove from the walls of any old finish, because in the future they can start multiplying bacteria. In the glue installation method, they will interfere with high-quality adhesion of materials, and the panels will fall on the wall unreliable.
  • Remove the plain layer. Many experts claim that this work is not mandatory, however, if you need to apply to the base of the primer, the old whiffs will interfere with it, so it is better to remove it from the wall.
  • Mold and fungus on floors – a frequent problem. It’s not easy to fight her. For this you can handle damaged areas with special solutions. Some companies produce such funds in the form of spray.

It is worth noting here that it is possible to completely get rid of the fungus only after removing all the mushrooms, so The only way out will be to complete the old plaster and careful impregnation of the opened area with the corresponding solutions.

  • After that, it is necessary to smell all the cracks that are based on. To do this, it is necessary to prepare a high-quality spacing mixture (acrylic or gypsum is more suitable).
  • Pre-seams need to expand. They need to be cleaned from the balance of the former solution.
  • These sites should be soaked with primer.
  • When the soil is completely dry, it is necessary to smell the mixture into the overlap, which will close all empties.

The grounds are recommended to be processed by primers so that the materials are better clung to each other and kept more reliable.

Mounting

Installation of MDF panels can be made frame and glue.

On frame

Consider stages, how to install panels on the frame.

  • First you need to make a wall lamp. It is metal or wooden (from a bar with a certain cross section).
  • If the frame is made of wood, then it is better to choose a bar with a square cross section and a length of 3 cm. In addition, these details must have a moisture level of less than 15%.
  • Wood frames need to be treated with antiseptic.
  • Now you need to know the size of the walls with a roulette. In this case, the length of the bars should be slightly smaller than the calculated indicators.
  • With the horizontal position of the panels, the shap must be vertical and vice versa.

  • Transfer all measurements on wooden elements. Next you need to cut the bars in accordance with the agrees. Place the hacksaw perpendicular to the wood to avoid the appearance of the curves of the ends.
  • Now the rails need to be fixed on the walls of the dowels, if the base is brick or concrete. If it consists of a tree, you should use the screws.
  • After that, you need to put the insulation in the intervals between the details of the crate.
  • To secure the finishing canvases, you need to use a kleimer for MDF panels and self-tapping screws (3×20 mm). They need to be installed in the grooves, or use special nails with a fine hat.
  • At the end of the finishing work, it is necessary to combine external planks and internal corners.

Metal frames do not differ in their design from wooden. First are installed wall profiles (around the perimeter). Then the main parts are mounted at a distance of 40-50 cm from each other. All profiles are fixed on the walls of self-drawing. After that, you can move to the installation of the finish coating.

On glue

Montage with adhesive way can also be made with your own hands. With this method of installing MDF panels, the base must be perfectly smooth.

  • Walls can be covered with primer deep penetration so that the base is more reliable and acquired additional adhesion.
  • After that, the MDF panel should be cut with a jigsaw or hacksaw on parts of the desired size.
  • Then you need to knead the required amount of glue. It is applied to the back of the trim. The mixture is recommended to apply portion. Glue covered places should be as much as possible.
  • Stacking the starting panel must be carried out from the bottom of the overlap.
  • Next, each panel should be pressed against the wall and hold for a while in such a state. You should continue to work until you post all MDF-slabs on the overlap.
  • Sust all the elements should be carefully so that there are no significant visible gaps between them.
  • At the end of such works, the connecting strip is fastened, and the corners are installed. They are fixed on the surface with liquid nails.

Often, the installation of MDF sheets is carried out on a plasterboard basis. This inexpensive material is used in the framework of the frame, and is installed directly to the overlap to align it.

The drywall work should be carried out as careful as possible, as it is fragile, and it can be easily damaging. Repair of broken material, as a rule, it is impossible to produce.

Tips and recommendations

Making the installation of MDF panels at home without the involvement of specialists is quite possible. For this you only need to stock high-quality instruments and materials, as well as follow the instructions.

Perhaps you will use some tips and recommendations from experienced finishing.

  • At the preparatory stage, remove the plaster from overlapping to the base. This will allow you to identify hidden wall defects, as well as reduce fasteners.
  • If you install a metal frame, then it is better to use a small grinder or disk saw. With the jigsaw on metal work can noticeably delay.
  • Wood frames are simpler. Work with them easier. For them do not need a large number of hard. In addition, such structures absorb moisture, and then give it at the MDF-Plate level. The main thing is to immediately process the framework with an antiseptic agent, and it will last as long as possible.
  • Crop the finishing materials neatly. During such work, it is possible to randomly damage the front side if you “capture” an excess part of the part. Therefore, it is necessary to take into account how the teeth are located on the jigsaw.

  • If you are using a metal frame, then fix the beammers are recommended using small hats with small hats. Such mount will not create interference with further work.
  • Consider that the diagonal method of laying MDF panels is more costly.
  • It will be easier to work if you sketch or take a picture of the resulting crate, designating all coordinates of the intersection of bars and profiles.
  • To close the corners, such fittings are perfect, like MDF Corners. Inside these elements will be able to hide the screws that fix the extreme panels. Attached similar parts for glue or liquid nails.
  • To separate the slopes, use the remaining pieces of MDF panels. Attach similar elements along and across. So, if the slopes are narrow, then the pieces are attached across, and if they are wide, then they should be attached as the owner wishes.

Beautiful examples

The finishing of overlap MDF panels can make the interior more alive and original. Such materials can be used in the ensembles of various styles. For example, it can be a modern setting with a multi-level stretch ceiling, suspended cabinets, LED backlight and leather soft corner.

MDF panels look perfectly in bedrooms. For example, the materials of a neutral brown shade can be placed the wall in a double bed. In a similar setting, the floor will look harmoniously, decorated with a parquet board or laminate in color panels on overlap. So that the general image of the interior is not merged, you should beat it with wall colorful paintings and contrasting decor items, for example, a white fluffy rug.

If you want to install MDF panels in the kitchen, then you should purchase moisture-resistant options, because in such conditions, ordinary coverage can quickly come into disrepair. Against the background of walls decorated with panels under the tree, almost all types of headset and equipment will be organically looked. It can be as items with wooden textures and high-tech parts with chrome and shiny surfaces.

Especially solid and organically high-quality plates look under the Cabinet. It can be both bright and dark coatings. On their background there will be presentable glass or wooden tables, leather chairs and sofas, as well as modern lighting and wall paintings with calm scenery.

Especially spectacular MDF panels of dark shades look in cabinets that have large windows passing a lot of natural light.

Overview Mounting MDF panels on the wall See next video.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: