How to make the tiles under 45 degrees?

How to make the tiles under 45 degrees?

Modern design projects require various skills from masters, including tile processing. To work with a tile, very often you have to make it washed under 45 degrees. Thanks to this reception, you can bind various protrusions and niches, the corners between the wall and the floor. Also pruning at an angle is needed when you want to create an unusual masonry. Consider in more detail how it is done correctly, as well as with the help of which tools all works are produced.

How to make the tiles under 45 degrees?

How to make the tiles under 45 degrees?

When you need cutting tiles?

To this method of processing the tile has to be resorted in various cases when it is necessary to create a beautiful straight angle. For example, when it is planned to put the tile and on the wall, and on the floor, when you need to bind the existing ventilation box available on the overlap or recess. In modern apartments you can find various design features, which means that the variations of the application of the tile are significantly expanding.

Using such a sharpening method, the intergraph seam looks more accurate, and the edges of the tiles on the junction are more hermetically closed by grouting, which reliably protects them from exposure to moisture or random strikes.

Cutting tiles at an angle of 45 degrees is performed in case you want to finish with an unusual way, For example, diagonal. To do this, you can use both square and rectangular tiles. The latter will create unusual ornaments (and even the Effect of the Parquet Christmas tree).

How to make the tiles under 45 degrees?

How to make the tiles under 45 degrees?

Bulgarian for washed

An ordinary Bulgarian is in arsenal not only in professional finishers, but also from lovers. It must be equipped with a diamond disk. Install the tile under the edge face down. The tool must be adjusted, then it will be easier to achieve the desired angle. At the same time, first need to set the minimum indicator so as not to melt the edges. When the desired angle is rapidly, walk on it with a diamond disk again to polish it. Can be used for grinding file or sandpaper.

There are special nozzles for grinding. They are easy to replace – the base with the velcro is installed on the thread of the grinder. They are not so durable as diamond “turtles”, but also cost cheaper. For those who are not engaged in production scale, this may be quite enough.

Many prefer to use a mask or respirator when working with a grinder. This tool gives too much dust, which is not recommended to breathe.

How to make the tiles under 45 degrees?

How to make the tiles under 45 degrees?

How to use Bulgarian?

Consider in more detail how to use the grinder, working with tiles:

  • Tile should stand in a vice vertically. Put the diamond disk, and then select the operation mode of 1000-2000 revolutions per minute.
  • Remove the angle of the disk to which notches are applied.
  • The tool should be located at an angle of 45 degrees (relative to the frontal plane of the tile).
  • Remove the surplus with smooth contacts so that each time the surface leaves the finest layer, not reaching the edge of the external angle.
  • The edge of the thickness (about 2 mm) should remain untouched. You can mark this distances with a pencil.

At the second stage, the support plate is installed on the grinder. The circle with the sandpaper is placed in the center of the support plate. Now you can bring the edge, and then create the most acute angle.

How to make the tiles under 45 degrees?

How to make the tiles under 45 degrees?

How to make the tiles under 45 degrees?

Electric tiles for drowned

As it follows from the name, the tilekorez is a more narrowly specialized tool, which means that the roofing of the tile with it can be made better. Of course, not everyone will buy it for one-time use. If we are talking about a high-quality model with additional functions, then this tool will cost quite expensive. In addition, you can achieve really good results on it with experience, so you have to spend some time to purchase the necessary skills.

If we are talking about professional finishers, then they must have electric tiles in the arsenal. Cutting the tile takes less time, and dusting such a machine leaves less.

How to make the tiles under 45 degrees?

How to make the tiles under 45 degrees?

The tile cargo works in two modes:

  • for direct washed;
  • for washed under the desired angle.

With it, you can cut the strips thinner 5 mm even with solid tiles. To avoid melting, water comes to the place. Also she immediately removes dust and trash.

How to make the tiles under 45 degrees?

Using slabcoresis

To learn how to work with this tool, you need to follow a certain procedure:

  • A painting tape passes on the tile.
  • Note the desired width of trimming on the tile with a pencil and ruler.
  • Placing it on the tool platform.
  • Press the tile and gently move to the disk. First you need to cut up too much, and then engage in grinding angle.
  • It is necessary to prevent the touch of the glaze, otherwise the edges will look unevenly. If the surface decorative layer of the tile has been going on, then with sufficient skills you can stick to Eatak.

How to make the tiles under 45 degrees?

How to make the tiles under 45 degrees?

How to achieve perfectly straight angle at the junction?

If you want to create a smooth junction, you will have to work as little as possible:

  • To begin with the first tile using the construction level. Its land should be a little bit out of the plane of the corner of the base.
  • After that, the second side of the corner is aligned. Each glue for tile has its time hardening, so much is given to hanging the resulting angle.
  • On the same principle, the following flanges of the tile are glued. The main thing is that the vertical of the walls was initially withstanding, otherwise hide the defect from unsuccessful joints will be practically unreal.

Keep in mind that on the joints after feeding the tile becomes more fragile. For this reason, such styling is usually not used on surfaces experiencing a large shock load. Especially rarely it is used when cladding steps. Thus, when making street ladders, builders most often use metal corners, and sometimes put tiles of therapy so that the upper module is a bit out of the side.

How to make the tiles under 45 degrees?

How to make the tiles under 45 degrees?

Another way to create oblique edge:

If you want to make a trimming of a ceramics fragment with your own hands in a simple way, that is, another option. To do this, swipe the glass cutter on the decorative side of the tile. After that turn it over with the invalid side to yourself, and then make a grinder V-shaped cutout on the entire tile width. Now you can calm the surplus, as well as make a refinement with the masculine.

It is recommended to use emery paper No. 40 or No. 60 – for a coarser circumference, or No. 80 – to bring the edges.

How to make the tiles under 45 degrees?

How to make the tiles under 45 degrees?

How to make the tiles under 45 degrees?

Tips from specialists

To work with porcelain, it is preferable to use professional electric tiles, as it is adapted to work with a firm material. Yes, and this material itself is more expensive, so I want to minimize its loss during processing.

When driving an angle, you can do not 45Gradusov, but sharper. This will slightly simplify the glue tiles at right angles.

When working with skos at the corners, high-quality grout is very important, So how to hook a tile with a dress, you can even strap from clothes. This can lead to from chopping her fragment. If the chip still occurred, but at the moment you are not going to replace this tile, grouts will help hide a defect. They are produced in different colors, so pick up the desired version of the color of the ceramics will not be labor. There is also another option: use any existing grouting and tinkering it from top of the paint desired shade.

How to make the tiles under 45 degrees?

How to make the tiles under 45 degrees?

When, after laying the tiles on the seams, small flaws can be seen, for example, from unsuccessful grinding glaze, you can use the masking compositions that will hide imperfections. Such corrective agents are convenient to use – in the cap, as a rule, there is a small brush. The main thing is to carefully examine the instructions. Note that we are talking about very minor flaws, and not about chopped pieces of ceramics. The corrective means will become an indispensable assistant if you need to “discolor” a small crack on the tile, and on any ceramic product.

The use of the technology washed the tiles under 45 degrees allows you to make a good repair – this option is more expensive and overall advantageous than plastic corners on the joints.

How to make the tiles under 45 degrees?

How to make the tiles under 45 degrees?

How to make the tiles under 45 degrees?

With sufficient experience with finishing materials, you can do everything yourself. If you do not have the necessary qualifications, and finances allow you to hire experienced workers, it is better to trust professionals – then as a job can not be doubted.

How to make the tiles at an angle of 45 degrees, see below.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment