How to glue wallpaper in the corners of the room?

    Decorating walls in such material, as wallpaper, is the most familiar way when the question is about updating the interior. Invite specialists for pasting fabrics with wallpaper conveniently, but not necessarily. Enough to have a readiness to independently carry out such repairs.

    Features of the process

    If there is no extra money to pay for professional finishing, you can cope with the pasting walls. But there are problems with how carefully glue the wallpaper in the corners. Before you take for a business, it is better to know some building rules.

    It does not matter in principle, from what place to start the room pasting with wallpaper, if all the angles are smooth. If it is not so, it is better to choose that angle after the wallpaper stickers on which you can avoid the skew stripes on a flat surface. In any case, it is better to start working from that corner that does not get into the eyes or at least in the future will be shrouded with furniture. Choose for pasting the first web protruding angle is definitely not necessary.

    Should not be used at the junction of two walls a whole bulk fabric, especially considering that some are very wide. Even on the very smooth and neat prosecution, the wallpaper is frozen and slightly thrown, after drying, giving shrinkage.

    If there are switches or sockets near the corners, before starting work it is better to interrupt the supply of electricity, remove the covers of these devices. The protruding parts of the electrical system can simply be stuck with wallpaper, and after completing the work, carefully cut out the places of sockets and switches. So you simplify your work and the result will be better.

    Surface preparation

    So that the walls of walls by wallpaper in the first turn did not turn into a torture, you need to carefully prepare the walls to decorate.

    Corners at closer examination may be curves, rounded, sometimes there are noticeable depressions and bugs. Therefore, experts advise not to regret the strength and time to put the uneven surface, and maybe stuck. A good helper in this case will be plastering corners.

    They are aligned in terms of the level and glued with the same plaster or putty. There are corners for inner and outer corners.When fresh putty dries dry, it needs to rub sandpaper to make the surface smooth. Then the angles should be carefully primed and waited until the extra moisture leaves from the primer.

    All these measures will allow the process of occupying the corners easier, and you will be satisfied with the result.

    If it is not possible to achieve absolute evenness or do not have time, you need to approach the choice of wallpaper themselves. For pasting curves of surfaces, loose finishing materials will be suitable, as they will have to glue them, and from the side of the place of imposing the canvas on the canvas should not be noticeable.

    A successful choice in this case will be flieslinic wallpapers with a small pattern or monophonic. Also curvature angle can hide non-smooth ornamental materials, and even fiberglass under painting.

    Stowing step by step:

    • Before starting the pasting, you need to prepare all the tools and materials.
    • Make the calculation of the area you want to go and buy the required number of wall rolls.
    • Select the appropriate wallpaper glue and dilute it according to the instructions.
    • Stock roulette, plumb, pencil, long metal ruler.

    • Prepare a building knife, roller, brush, sponge or pure rag.
    • Bring a stool or stepladder to get to the top edge of the wall in the process.

    Having retreated four-five centimeter junction, we carry out a pencil on the wall of the line, perpendicular to the floor, focusing on the plumb. Most modern wallpapers are mixed into the joint. Therefore, on how correctly you will spend this line and take the first web, it depends whether the subsequent stripes are strictly vertically or with distortion.

    For loyalty, it is better to make pencil guidelines for each of them.

    Walking strips are cut with a margin of 2 centimeters, since after drying they become shorter. Since the wallpaper is sold in round rolls that are also quite wide and heavy, to apply each time they are uncomfortable. So cut the decorative canvas better on the floor on the surface prepared for rolling.

    Wall need to carefully glue glue. Particular attention should be paid to the corners, because it is in these places that the lag behind the decorative layer is the greatest. The resulting treatment with glue walls applies to all cases: when you finish the walls and paper, and phlizelin, and vinyl wallpaper. And in the case of the use of heavy vinyl wallpapers, it is necessary to miss glue and their. In the process of work, if you laugh and the glue in the corners managed to dry, be sure to repeat the sickness again.

    Technique of work when pasting the corners has long been worked out. There are techniques for the salary of external corners and internal.


    When finishing the walls, the convex surfaces are especially thrown into the eyes, so the quality of the pasting of external angles will largely determine the perception of the room as a whole. If the angles are smooth, it is enough to wrap the wallpaper cloves for the corner of a centimeter for three or four from the protrusions and glue. If the wallpaper starts wrinkling, they will have to neatly cut into the folds. The next strip can be laid on the wall as they do on the plane.

    If the outer angles are curves, so it’s easy to solve the problem will not work. When you decorate the wall with materials that practically do not give shrinkage after drying and combining the joint in the junction, the cloth on the corner must be pasted in such a way that it comes out for the rotation of centimeters for five. Another cloth when sticking should be a little part of the previous one. In the middle of the line is made of a neat incision.

    Excess material on top and bottom remains to remove. Canvas how to smooth out and press the surface as much as possible.

    If you are dealing with paper wallpaper, hurry to trim the back is not needed. Check the correctness of the sticker with a plumb. If the deviations are very large, clearly unnecessary wallpapers can be carefully cut on the intended line.

    To make the completion in the design of an external angle and so that with time the wallpaper does not get cold over time, it is better to take advantage of plastic parts for wallpaper, selected for them in color. Need to calculate in advance how much they need to work. Glue corners on liquid nails or using silicone sealant.

    The approach in the appendix of the outer corner is used on the acts around the door and windows. Beams and other similar elements with external angle are covered separately by the same way using wallpaper trimming, which remained after sticking the walls on the walls.


    To competently dispose of the next web in the corner, you need to measure the distance from the extreme glittered strip to the joint and add to the resulting digger two more centimeters. The wallpaper must be trimmed with this and applied to the wall, pre-lubricated glue. With proper trimming, a narrow strip of wallpaper should be on the adjacent strip behind the joint line. Cloth smooth the roller and cloth to release all the air between the wall and the future decorative coating.

    If such a bubble does not want to disappear, experienced people recommend piercing it to release air, and with a syringe to pour a little glue under the wallpaper, and then smooth the roller.

    If the angle is uneven and in the process of sticking on the strip, wrinkles appear, scissors, as in the case of an outer angle, it is necessary to make neat cuts towards the fold and glue the canvas.

    Neighbor band need to be glued on the second wall with the allen in a couple of centimeters to the previous one. Check the quality of your work using a plumb. When smoothing the second sheet, you must not press the wall edge of the required allowance.

    Then the line need to cut the layers through the construction knife, remove the excess upper layer, and then the lower segments. Wallpaper in the corner once again woven with glue and press the wall so that there are no air bubbles.

    If you do everything neatly, it turns out even seam.

    Picture Subtleties

    There are certain difficulties in order to stick to the protruding and internal angles with a pattern. Using a decorative coating with a clear, pronounced pattern, you will have to try not to distort it at the junction. It is necessary to provide this task in advance when selecting materials in the store.

    Especially noticeable distortion on wallpaper with vertical stripes. If the drawing is horizontal, it may look peashed relative to the ceiling and floor.

    You can avoid this, only if you take the corners of the mustache. The edge of the canvas should be strictly strictly on a plunder. Neighboring strip must be neatly cut through the edge of the angle. Moreover, the wall with paper wallpapers, it is necessary to produce all these manipulations not only carefully, but also at the maximum speed. Otherwise, the coating itself will spread and you will turn out a non-one wall strip.

    So that irregularities are low, the resulting joint is recommended to hide at the top of the corner. Avoid a certain shift of the picture is unlikely to succeed, but with a competent approach it will be so immeasured that the look will challenge the joints of the joints only in those who performed this repair.

    Proper combination

    To choose the walls with wallpaper original, to highlight them specific functional zones, emphasize the advantages of a particular room, designers offer numerous ways to apply decorative materials of different colors. Wallpaper may differ in drawing and texture.

    All this must be considered when different walls are joined in the corner. The sticker is very dense by structure of the canvas produced with a minimal adhesive. In the case of using fiberglass wallpapers, uneven places will be rushed into the eyes very much. One edge of the canvas, turned out to be on top of another, hide will not succeed.

    Vinyl wallpaper fix only with a rubber roller. Using other tools, you can erase the drawing and spoil the general type of decor. This should be borne in mind, including gluing such wallpapers in the inner corners, where to wonder only with a roller, seeking a complete clutch of wallpaper with the surface of the wall, is not always comfortable.

    When docking different on the texture of wallpapers, the same paper and vinyl, you need to stick them so that thinner turned out to be more dense and thick. Then the place of the allen will stand less.

    Given all these tricks, even without the involvement of professionals, you can achieve neat wallpaper stickers. The results of your efforts will delight you for years.

    In this video, you are waiting for tips on sticking wallpapers in the corners.

    Rate the article
    ( No ratings yet )
    Add comments

    ;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: