Glue “Moment Gel”: Description and Application

Transparent glue “Moment Gel Crystal” belongs to the contact specification of fixation materials. In its manufacture, the manufacturer adds to the polyurethane ingredients and packages the resulting mixture along tubes (30 ml), banks (750 ml) and cannors (10 liters). The density parameter of the substance varies in the interval of 0.87-0.89 grams per cubic centimeter.

Positive aspects and features of the composition

The advantages of the produced adhesive are represented by crystallization of the hardening seam, which improves the force of the clutch with the treated surface. With prolonged exposure to non-aggressive alkalis and acids, the operational properties of the applied composition is observed. Transparent universal glue “Moment Gel Crystal” Resists the negative effect of negative temperatures and is unhindered to two years.

The appearance of this possibility is generated by the temperature of the room, varying from the twenty degrees of frost to thirty degrees of heat. If the heated air contains a small percentage of moisture, crystallization reactions are accelerated. The cold slows the evaporation of solvents, prolonging the polymerization period of the substance. The frozen material forms a durable layer of transparent film. It overlaps the path of moisture trying to lean inside the structure of the product being repaired.

The time of complete solidification of the film coating reaches a maximum of three days, and the fixed product is allowed to use through one day after fixing parts. Restoration of the initial consistency and operational properties of the frozen mixture flows at room temperature. The relatively high coefficient of gluing strength provided by the manufacturer makes it possible to immediately expose the refurbished subject to further processing operations.

It has only positive reviews and a detailed description on the package. Available in container 30 ml and 125 ml.

Areas of use

Contact glue applies in cases where it is required to quickly repair damaged items. Its substance is ideally combined with a variety of plastic materials. Also glued porcelain, glass, ceramic, wooden, metal, rubber surfaces.

Applicated with careful implementation of instruction indications of the substance tightly fastens plexiglas, cork wood and foam sheets.

It helps to splicing textiles, cardboard and paper cloth. The species under consideration of the second time “moment” is incompatible with polyethylene and polypropylene. Also the composition is forbidden to glue pieces of broken dishes intended for cooking and storing food.

Precautionary measures

Due to the presence of poisonous components, experts recommend to apply adhesive composition in a very careful ventilated or ventilated room. The performance of this condition reduces the likelihood of body poisoning accumulating in the space by evaporation. If the master ignores such precautions, with inhalation of the evaporating ingredients, he has parliaucinations, dizziness, vomiting, nausea.

Material getting on the skin of the hands is prevented by putting on special mittens. Eyes need to cover with special glasses. In the absence of listed means of protection, the hands and organs of the blade are disappeared thoroughly with water.

Due to the low temperature of self-ignition, the material must be kept away from open flame sources.

In the interruptions between using a tube, a jar or a canister with a substance should be tightly closed. This will prevent crystallization, which causes an irreversible disappearance of glue properties.

Use of transparent glue “Moment Gel Crystal”

The instruction manual for the adhesive mixture proposes to free the parts of the product being recovered from the pumped pollution, as well as completely eliminate the detected flax spots. Then it is necessary to handle the connected elements by contact glue and leave them for five or ten minutes at room temperature. After one hour, the process of forming a perfectly visible film begins. Bonding porous materials makes applied increased amount of substance.

To improve the fixation coefficient, it is recommended to make a uniform application of the layer on both parts of the object.

When a transparent waterproof glue “Moment Gel Crystal” will stop sticking to fingers, it is allowed to connect the surfaces. Such action is accompanied by compliance with the maximum accuracy, since after the final hardening of the film disappears the possibility of safe correction of erroneous operations.

The fixed surfaces of the object being repaired are pressed to each other with a pressure, the minimum parameter of which exceeds the value of 0.5 Newton per square millimeter. The clutch force decreases due to the occurrence of emptiness filled with air masses. To prevent this trouble, the item parts must be tightly pressed from the central part to the edges. The latter are carefully fixed with each other in order to improve the reliability of the attachment.

Latest stages of work

From the remnants of the substance used, tools and surfaces are released by a means designed to dilute paintwork materials. Fresh stains of the transparent composition of the “moment of the crystal gel” are eliminated by a cloth undergoing preliminary impregnation with gasoline. From the surface of textile canvases, dried spots are output by chemical cleaning.

The remaining compatible materials are processed by an effective tool intended for paint removal. All information discussed above are based on information obtained after testing adhesive composition.

Due to the existence of a set of ways and conditions of use, the glue is recommended to test to achieve a positive result.

Video review of glue “Moment Gel” See further.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: