Glue for glass: Features of choice

A more convenient and enhanced version came to replace vinyl wall coatings – Glass. Due to dense fibers present in their composition, they have a lot of weighty advantages. Consider Read more Features of the selection of glue for such finishing materials.

Advantages

Glassworks have a number of positive qualities. These include:

  • resistance to mechanical damage;
  • They can be repeatedly painted;
  • environmental Safety;
  • convenience in maintaining cleanliness;
  • refractory;

  • heat resistance;
  • moisture resistance;
  • Strengthening (reinforcement) of walls;
  • Property of breathable wallpaper.

The usual glue to this type of fiberglass will not fit. It will take a mixture with a more complex composition, additives and high adhesion.

Description

Stelkomy is much heavier and more dense vinyl, so the standard composition on the starch basis will not be able to ensure their dense grip with the wall. Professional adhesives contain modified starch and complex compounds of polymers.

There are several requirements for them:

  • They should be moisture-resistant, so that the installation of wallpaper wallpapers with high humidity has become possible;
  • adhesion should be higher than the conventional adhesive bases (to ensure good clutch with the wall and prevent fast dug);
  • Alkal balance in the composition should not exceed the value – 6;

  • plus there will be additives-fungicides and antiseptics that prevent the appearance of mold and fungi;
  • The possibility of rapid drying and high duration of storage time – they will simplify the task for inexperienced masters;
  • Solutions with sharp odors should be avoided – this is an indicator of harmful chemical additives.

The glue price depends on the two indicators:

  • clutch quality with a working surface (adhesion);
  • Drying speed.

Specifications and composition

Fiberglass coatings are used not only for walls, but also for ceilings.

Glue mixes are sold in two types.

  • Dry. Adhesive powder is distinguished by a long service life, compactness, more favorable price. As part of a teller, a substance responsible for adhesion and antiseptic additives, fighting against the appearance of fungi and mold. The only drawback is a long mixing process with water. Liquid is added little and constantly stirred with powder, preventing the appearance of lumps.
  • Ready. This mixture is ready to use. It has antiseptic additives and polymers responsible for clutch. Available in the packaging of 5 and 10 kg. They are a bit more expensive than powder glue, but there are no special differences in the properties.
Read more  Syringe for plasterboard: Characteristics and purpose

There are also varieties of adhesive solutions with a narrower or broad direction. It all depends on what glass windows, as well as, on which surface you want to glue them. The following adhesive mixtures are suitable for fiberglass.

Universal

Simple glue differs from the usual composition with complicated additives. He is mating to keep wallpaper on the wall. The advantage of a universal solution in the ease of removal of wallpaper after a long period of operation. Not suitable for ceilings.

As part of a complex glue, there are additives that allow you to smoke phlizelin, fibergust and other wallpapers

Based on PVA

Specially designed for sizing photos and stelkoev. The main feature is high moisture resistance, which allows you to use it in the bathrooms and other rooms with high humidity. It also distinguishes simplicity of dismantling wallpaper.

Dispersive

This is the strongest adhesive of all of all of the above. It is used when gluing heavy cloths on the surface of the wall and ceiling. Such glue guarantees high adhesion, but the process of replacing wallpaper (when using this substance) without special means will be complex.

Heat-resistant

This type of glue is suitable for all types of wallpaper. It will be a good option for country houses used only in the summer, cold veranda and other premises for which the effects of minus temperatures are characterized.

When choosing adhesive compositions, pay attention to their quality, place of the manufacturer on the market, as well as compliance with the standards and requirements of GOST.

On the glue composition of glue compositions for glazes allocate several manufacturers, given the quality indicators, price and popularity.

Oscar

Such glue is sold in the form of powder, and as a finished mixture. He has many advantages:

  • safe for health;
  • heat-resistant;
  • moisture-resistant;
  • economical;
  • has a long service life;
  • It has an affordable price.

Dry powder needs to be diluted with water temperature on the instructions indicated on the package. Dries Oscar glue after 10-15 minutes. This property allows you to correct the location of the wallpaper during work.

Read more  Tips for choosing a metal spatula

After drying, Oscar becomes transparent, does not leave traces and stains. Suitable for a large number of surfaces: to wood, concrete, cement and other. This manufacturer has the best reviews.

Kleo

It includes standard components: modified starch, festivalides and antifungal agents. This glue is very effective and easy to use. It is distinguished by such features as:

  • environmental friendliness;
  • Easy method of obtaining a mixture;
  • efficiency;
  • Easy way application.

It does not have chemical additives, so it is safe for people and animals. The quality of the clutch does not suffer from this. Such glue is suitable for surface treatment of walls and ceilings. After mixing the powder and water, it is enough to wait 5 minutes, after which the solution will be ready for use. It dries on the surface slowly, giving the ability to align and adjust.

The main feature of Kleo is that he makes the wallpaper breathable, and this prevents the appearance of mold and fungi.

Quelyd

Quelyd is a dry mix, similar to coconut chips. It has a number of positive properties and advantages:

  • protection against fungus;
  • reliably grabbed with surfaces;
  • Makes the “breathable” finish.

Wallpaper leaf during gluing can be corrected and adjust. Quelyd glue after drying does not leave stains.

MetyLan

Metylan is a less popular wallpaper glue, characterized by high moisture resistance. Its more often used in rooms with high humidity. After gluing this composition, wallpapers can be repeatedly painted. Does not leave traces and stains.

What to take into account when choosing?

Quality wallpaper glue is necessary for beautiful and neat work with the canvas of any species. To select a suitable product, you need to consider the following criteria:

  • glue should be approached for heavy wallpaper;
  • Must be moisture resistant if the installation will occur in wet rooms;
  • Antiseptic and antifungal supplements will be a big plus;
  • The composition should allow the “Breathe” finish;

  • If you like to change the color of the rooms, pay attention to the compositions that allow multiple painting of wallpaper materials;
  • short drying time;
  • For glue, an easy way to prepare should be characterized;
  • Compliance with storage time.

How to calculate the number?

To correctly calculate the flow of glue, you need to know the square of the surface of the wall or ceiling.

Read more  Moroccan Style Tile: Oriental Notes in the Interior

Take, for example, the total consumption of the finished adhesive composition of 200-300 grams per 1 m2. It is also necessary to take into account the cost of glue for pre-processing surfaces with soil – it is 50-70 grams per 1 m2. The figures obtained (250-370 grams) of the composition multiply on the surface of the surface. Thus, you can find out the amount of glue purchased. It is better to take it with a slight margin.

Useful tips from pros

Experienced masters revealed a number of nuances that will help with finishing work.

  • When mixing the powder glue, water is poured into the container, and a certain funnel is created in which the adhesive powder is slowly poured.
  • Click lumps need after 5 or 10 minutes of swelling
  • The working surface must be smooth. For this wall or ceiling you need to pre-cake and primed (strongly diluted glue composition can be used instead of primer).
  • The texture of the glasses can hide some irregularities, so there is no need to try to get a perfectly smooth surface.
  • Putty and soil should dry to ensure maximum clutch of surface glue and walloping.
  • Apply glue better with a roller or brush (depending on the size of the working surface). The composition is applied on the wall or ceiling, but not on the wallpaper. The layer must be uniform and form 1-2 mm.

  • Excess glue must be removed using a sponge or rag.
  • During gluing, part of the glue can perform at the jack of wall cover. It is not necessary to clean it – after drying, he will not leave spots.
  • With the obesification of wallpaper, it is necessary to be very attentive, the glue of their joint to the junction. Need to pay attention to the drawing to avoid irregularities.
  • If your hubble is no heat resistance, the room temperature should be above 10 degrees, but below 23.
  • When drying in the room there should be no draft. It is necessary to avoid direct ingress of sun rays, otherwise there is a risk that the glue is bad to grab with wallpaper.

Given the above nuances, fiberglass wallpapers will be glued smoothly and high quality and will serve for many years.

About how to glue a glassy, ​​look next.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: