Features Profiles for Glass

    Modern interiors contain many glass partitions and elements. Designers decided to use glass designs so that the existing space is as functionally distributed as functionally. For framing and fixing glass sheets, it is customary to use special profiles.

    general description

    Glass profiles, as a rule, are standard sizes and buildings. On the basis (most often happens metallic) there are holes where clips are attached. They are located at a certain distance. And also the composition of the profile includes clamping strips for fasteners and decorative lids-latch.

    The design implies the presence of a guide strip and clamping. For their account glass can be fixed very reliable. Decorative profile covers most often exposed to grinding, polishing or anodization.

    It is worth noting that profiles can be polished (with a shiny surface) and unsalted (with matte). Usually, clamping profiles are equipped with more gaskets made of rubber or silicone.

    They are needed to remove the gaps formed. The obligatory part of the profile is also screws with a threaded plug and plugs on the ends to give a completed view of the entire design.

    Glass sheet dimensions determine the parameters of the accessories. To install most glasses suitable standard profile height of 4 cm. However, there are options and with a large height, intended for large glass canvas.

    For glass interior partitions, you can choose a profile from any material, including silicone or plastic. But for the facades is better suitable option from aluminum.

    Such profiles are lighter, differ in corrosion resistance and low temperatures, are well prepared. It is unwanted to use aluminum profiles near electrical equipment, as they are excellent current conductors.

    The profile is required for glass design to make it more rigid and reliable. They may vary depending on the use, design and style.

    Review of species

    So that the glass partitions are pleased, it is important to choose the right view, as well as the type of profile. By the type of design may vary on:

    • top;

    • lower;

    • finishing;

    • Facial.

    The frame profile acquired a very wide application, as it is used as a furniture, facade, reference. The connecting or sealing option is most often used for sliding doors or drawing up wardrobe rooms. As for the species of the most frequently used profiles, you can select multiple basic options.

    P-shaped

    Represent the most simple of all known. The design consists of two profiles with different sizes. As a rule, a smaller (bottom) is fixed to the floor, and the ceiling is greater (top). Special material is used to seal on both sides. Most often apply rubber seals, which provide reliable glass fixation and reduce friction between sheet and profile.

    P-shaped view is characterized by increased rigidity, reliability, durability and convenient use. Such designs can be placed around the perimeter of the glass sheet to protect it as much as possible from various mechanical damage. Suitable for fastening glass bags to the wall.

    Point

    Consist of two trees located along the edges, connected by a bar. Installing the profile of this species involves the hardening. The plastic elements are then inserted into them and fastened by bolts. So that the finished design looked more attractive, use plugs.

    Clamps

    The design of the clamping profile includes a bar, fastening elements, decorative latches. This species is universal, and most often it is used to fix the glass sheet in a vertical position. Suitable in order to mount the partition in the floor or in the ceiling.

    Locking glass occurs due to special planks. In some cases, the profile fastening is carried out throughout the perimeter of the canvas for greater reliability. The design can be used both for internal and for outdoor building. Great for residential interiors, business centers and shopping complexes.

    Clamping (docking) View profiles may vary by number of parameters.

    • In the thickness of the glass sheet. There are options for both thin cloths of 6 millimeters and for massive 20 millimeters.

    • On polished or unpolished (matte) surface. The polished version looks more aesthetic, can be anodized.

    • By application: inside the structure (non-invoded) and outside (anodized).

    Materials

    Profiles for glass partitions are often manufactured from the following materials:

    • metal;

    • tree;

    • PVC.

    Metallic option is usually done from stainless steel or aluminum. And the last material is more preferable. This is due to the fact that it is more reliable, has a smaller weight, not subject to corrosion. It is worth noting that the aluminum profile can be clamping or P-shaped. Among the advantages of aluminum, it is also worth noting the ease of processing, a smooth surface and resistance to a variety of damage.

    Steel profiles are heavier compared to aluminum, but at the same time serve significantly longer. By the ratio of price and quality This type of optimal. However, it should be noted that they are less flexible than aluminum.

    Tree profiles attract their appearance. For additional protection against moisture and dust exposure, a wooden design is covered with a layer of varnish. Currently, such design of glass sheets is very popular due to environmental friendliness. As for the service life, he averages 15 years. The minus of the wooden profile is its high cost.

    Plastic profile Similar to design for plastic windows.It is worth noting that PVC is non-toxic. The main advantages of this material are a variety of colors, ease of care and low cost.

    Silicone profile is very rarely found. It is used mainly as a seal. Most often represented by a transparent option.

    Dimensions

    Profile dimensions directly depend on the thickness of the sheets of glass. For example,For the finest glass planes in 6 millimeters, structures with a cross section of 20 per 20 millimeters and 20 by 40 millimeters are used. He usually has 4 grooves on each side, intended for crossing partitions. The profile of this size found an application for separating space on zones, for example, in large offices.

    Glasses with a thickness of 8 millimeters better muted sounds. For them, profiles are used a bit of larger cross section than for 6-millimeter sheets. This is due to the fact that they need greater hardness due to increased mass.

    Glass canvas with a thickness of 10 millimeters require the use of a profile with a minimum cross section of 40 to 40 millimeters. This option is suitable for a single layer glass partition. If the layers are two, then it is worth choosing a size of 40 by 80 mm, three – 40 by 120 mm, four – 40 by 160 mm. Such designs are widely used where it is necessary to ensure good sound insulation – in offices or in residential premises.

    For the thick sheets of glass with a thickness of 12 millimeters, a profile should be selected from which the line of section begins from 5 centimeters. For single-chamber packages, the section will be 50 per 100 mm, and for three-chamber – 50 per 200 mm. Often, such massive structures can be represented in various colors.

    Tips for choosing

    First of all, when choosing a profile, repel from the style of the interior.

    For example, for strict classics, a feature will be a black color, as well as neutral tones. For informal design you can use multi-colored types of profile. This will create original compositions and at the same time harmoniously combine them with a common style of space.

    In addition, it is important to consider also other nuances. One of the important is the cost of the profile. For instance,P-shaped species at a price lower than the clamping. However, it is worth considering that the first option is suitable for deaf designs, without opening. Clamping profiles are more versatile and apply not only to install glass partitions, but also for doors.

    Fastening fittings are constantly improving and selected depending on the type and type of profile. This is due to the fact that some models may have restrictions when used.

    FEATURES OF MONTAGE

    Profiles are usually going to enterprises with special equipment. So that the frames are high-quality, it should be very neat and accurately mount all the details. It is important to monitor when trimming angular compounds for compliance with an angle of 45 degrees. If you get some skills, then you can install a profile independently. To do this, you will need an angular fastener, screws and suitable sealant.

    Usually glass are installed in the profile at the assembly stage. At the same time, sometimes glass sheets can be broken, and they have to replace them.

    An important point when installing with your own hands is the drilling of exact holes in the profile. To do this, use a special template that allows you to withstand the necessary angle of inclination relative to the center of drill.

    Assembly is made in a specific order.

    • Glass windows need to be installed in the groove.

    • After that, when using rubber pads, seal it all over the perimeter.

    • Then set the stack for sealing and fixing the glass node. At the same time, it is still necessary to seal the connection.

    • If the glass is damaged, and it must be replaced, then all actions are performed in the reverse order. After which the glass sheet changes to a new.

    For fasteners of the profile depending on the material from which it is made, special accessories are used. Today, the market presents a wide range of details that allow you to make fastening and connecting frames, loops, valves and other elements.It is necessary to clarify that for different products it requires its fittings for connecting. Of course, there are universal accessories or alternative in the form of screws or other available elements.

    Rate the article
    ( No ratings yet )
    Add comments

    ;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: