Features of the rollers for stoveturis

When performing repair and finishing works, it is often the need for independent cladding of horizontal and vertical surfaces with tiles. It is then that the question arises about the use of a specialized tool that can smoothly and quickly cut the tile – best of all this goal corresponds to a tile. But in order for it to work reliably and accurately, it is important to maintain the performance of the roller, knife and other components.

general description

Rollers for stoveturisses are used when processing tiles, ceramic tiles, porcelain stoneware, and glass. This is a replaceable element for any tools. They are easily installed, besides, have a long operational resource.

In order to understand the principle of its work, you should stay on the features of the device of the tile. Each of them includes several details:

  • the platform on which the tile itself is placed;
  • The roller responsible for performing the plus tile;
  • carriage, as a rule, is located above the roller;
  • handle – ensures the pressing of the tile to the base;
  • guide rails for which the roller moves;
  • Supports for guides;
  • Paws for dummy tiles.

According to the mechanism of operation, manual type slab resembles the principle of operation of glass cutter. As you pass on the surface of the tile, the roller cuts the glaze. Located foot paw shocks tiles at the place of section. The output is accurate, even slice.

Some construction work requires the use of non-traditional tiled elements. For example, having a rounded form. In this case, we use tiles with a “ballet”, the roller in them is represented by a radial cutter.

All types of rollers are made of harsh metal alloys. This provides the duration of operation and high quality cutting edges.

Many enterprises are engaged in the production of rollers. You can allocate among them the most popular manufacturers.

Matrix – leading in the world supplier of hand tools. Despite the fact that the company appeared on the market relatively recently, she has already managed to conquer the confidence of masters in various fields. Tilebounds and consumables for them, including videos, are produced in Taiwan and in China. The entire production process is subordinated to strict standards and strict quality control. Such rollers have a long service life, ensure the reliability of the cut, and a pleasant bonus will be a democratic value.

“Bison” – a young Russian manufacturer of power equipment and tools. Today it is in the position of leaders in its segment. This is not surprising, because in the design bureau of developments, engineers are working with tremendous experience. And any novelties are tested in their own laboratory. For all your instrument, the manufacturer gives a guarantee up to 5 years.

Fit – Popular Canadian Brand, Over 10 years working in the manual and power tools for home repairs and professional construction. In the manufacture of rollers for plastic cutters, the company is focused exclusively on the standards adopted in the EU countries and the USA – this is not better indicative of reliability, high quality and ergonomics of products produced.

Montolit is one of the world’s leading manufacturers for processing and tile cutting. The company began its work in the middle of the last century in Italy. To date, the company has many unique developments and over 300 patents, some were awarded European and world awards. Rollers for wet cutting of this brand are implemented in 120 countries around the world. Warranty on products is 2 years.

Diam – another Russian enterprise, Which is engaged in the production of roller tools and tile cutters with bearing, as well as diamond equipment and consumables. Production is located in China. However, products are created taking into account the features of operation in our country. Rollers are widely represented in all building supermarkets, service centers work in different cities of Russia.

Experienced masters prefer Russian or European models, although Chinese videos are several times cheaper.

This is due to the fact that the Asian manufacturers make their consumables from “raw steel”. First time they cut well, but very quickly blinking.

Tips for choosing

The modern market offers many models of rollers for stovetur. They can have different sizes. The products are 180 and 200 mm in parameters of 22×10, 22x6x2 mm long in demand.

Most enterprises produce rollers with a diameter of 6 to 22 mm. In addition to diameter, they differ from each other sharpening angle. At the same time, the less diameter, the sharper will be the angle. This is done to make it easier to choose a roller directly to the material.

For instance, 6 mm roller with sharp sharpening angle is ideal for soft wall ceramics. And for enhanced porcelain stoneware, it is better to choose a roller by 10 mm. Of course, this does not mean that it will not cope with glazed soft ceramics. However, due to the more stupid angle, the risk that enamel will deteriorate.

When choosing a tile cutter, a separate attention should be paid to the parameters of the cutting carriage. The fact is that it takes over maximum loads and therefore should not be weak. In the center of the carriage placed roller. Choosing a tile circuit breaker, it should be remembered that the smaller the roller will be, the more subtle there will be a tile that he can trim.

Typically, most manufacturers on the package indicate all the necessary information for the user – manufacturer name, series, article article, diameter, type of coating (titanium or other). And also here contains information about which models this consumption is suitable. The most reliable stamps provide a table matching table with a type of materials for which the roller can be used. And also indicate the list of articles of the rollers of each manufacturer and models of the tile cutters for which they are suitable.

It should be noted that No equipment manufacturer can accurately declare the resource of its consumables. This is due to the fact that the same cutting base is different masters can cut a different amount of tiles. Someone will make 5 cuts, and the roller is extended. And someone will make 50, the video fits, he will sharpen it, and then will make another 50.

This is especially true when it comes to ceramics, since it can have a single, double or triple burning, it happens perhaps and unclear. In accordance with this, the parameters of hardness and hardness of the materials being processed. The manufacturer can not predict in advance that the master will cut, and what effort it will make it on the tile. On average estimates, the resource of European manufacturers is from 700 to 1000 p. m, in terms of one-line meter cost the cost of work will be about 1 rub.

How to sharpe?

The cutting roller of slab trees as exploiting its sharpness. You can correct the situation with sharpening it, these manipulations are performed on a diamond disk. To do this, hold the part in a drill or screwdriver, and pump one side, turning in a circle. Then the roller needs to be rearranged, and pump another part. Experienced masters for loyalty are another cycle.

Not all the masters know that on the tile cutting 18-22 mm you can change the rollers, without changing the entire rod of the whole.

Roller is primarily consumable. When it fails, it is always possible to replace on another, higher quality. At the same time change it will not be no difficulty.

All that is needed for this is to take a screwdriver and the key, and then unwind the axis of the rollers, which holds it. As a rule, in this case, small grooves can be noticed on the video, they confirm that the tool is worn out. After that, you need a roller from the new set to install the carriage in the groove, put the axis, secure it with a lock nut, and tighten the scold. With these simple operations on the replacement of the consumator can cope any, even a beginner master.

We considered the features of the work of rollers for stovetur. We hope our recommendations will help you purchase a durable item, providing high quality cut.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: