Finishing houses and utility structures, as well as various auxiliary buildings are often carried out using lining. This material is very good in its practical properties, but some people believe that its appearance is not perfect enough. It is not so, because there is a completely attractive solution – imitation of timber.
Such type of lining is significantly different from the usual varieties, and it is not only a matter of its unique trapezoidal configuration. Should not be confused with the Euro woman. Playing the timber allows you to give the items a variety of and shape, and such a product can be used in the inner, and in the outer finish. Modern technologies allow you to vary the width of each fragment from 9 to 19 cm; And individual manufacturers have mastered even the release of the imitation of a bar width in 25 cm. However, the cost of such solutions is large enough, and they are bought only in special cases.
The most claimed lining width 13.5 cm. As for the length, typical solutions are 3 and 6 m, although, if necessary, you can always choose the lining from 100 cm and above in 500 mm increments. Many trading organizations are made of non-format fragments, the cost of which is noticeably less, and the exact fit of parts to each other is ensured.
The thickness is of great importance; naturally improving the service life and strength of the product as it thickens. For interior decorations, lining with 1.8 to 3.4 cm thick, although it is preferable to the most subtle varieties of material. With outdoor work, the situation is directly opposite.
Models and options
Product classification is determined by quantity: the higher grade is assigned to the clap, the more reliable it itself, and the more beautiful the finish will look like. Work with the varieties of “Extra” or “A” is very good, because products of this kind have the least flaws. With the help of a variety “AV” you can achieve savings and at the same time get a rather attractive result.
Brusal imitation can be achieved with boards from various wood breeds. Most often, a spruce and pine array are used for the manufacture of such a finish, which are relatively available and very high-quality. Larch-based lickening is immunity to water, cedar has in addition to this property also with elegant appearance at high mechanical strength. But the excellent design turns into an increased cost of construction. In saunas and parilots, experts recommend applying a lipa or alder. In any case, below leave slots to ensure ventilation and release the inner part of the design from excess moisture.
Tips for choosing
To begin with, it is necessary to accurately decide on the tree of wood. In most cases, the lining with the imitation of the bar is made on the basis of coniferous rocks; The fastening device in the form of “spike – groove”, made of coniferous wood, helps guarantee dense adjacent, excellent thermal insulation and absorption of foreign sounds. For outdoor decoration, it is recommended to use the most durable and resisting negative weather influences. Inside the room fragility is admissible, but the grace and high plasticity become especially important. For internal works, pine looks preferably (at least in the budget category).
Acquire the lining need only where it is stored in the necessary conditions. Outdoor accommodation under the plastic film, even in dry weather, cannot be considered such conditions. Any seller who respes himself and the buyer always has a device for moisture measurement in wood. It is categorically unacceptable to acquire material with natural levels of humidity, because during the drying process it will inevitably crack or even get more serious deformations. The maximum allowable moisture indicator of the lining is 15%, and before the start of work, it should be stored to imitate a timber in suitable conditions so that it does not refuse.
When lining any room, even small, you need to pay special attention to the accuracy of measurements. When real dimensions allow, always better apply non-standard kits – it is significantly more profitable because the amount of waste decreases.
When buying the lining of two higher grades, you need to selectively control at least individual elements. Finding flaws on them, the consumer has the full right to seek replacement of low-quality products immediately. Of course, checking the boards in different packs, and not in one. For the crate, it is advisable to apply the board either the breed ram, identical breed of the lining itself. Thanks to this, temperature and humidity deformations will be excluded in the loudspeakers.
Tips for use
As in the case of other trimming materials, the lining with the simulation of the bar is applied after cleaning the walls from the previous finishes and pollution. On the smooth wooden walls you can install lining without crate. But if there are clear defects and deviations from geometry, which are hard or impossible to eliminate, it is recommended to use this design. Metal crate create on the basis of profiles, and wooden shape from the rails or bars. The gap between them should be ensured by a distance of at least 0.6 m.
In addition to actually, the cladding and the designs of the crates will also be needed:
- self-tapping screw;
- nails (in wet rooms);
- Kleimers (in dry spaces).
In cold premises, baths and saunas need to use insulation and waterproof materials or films. It should be impregnated with flag with anti-view drugs to ensure safety from fire. For outdoor decoration, it is recommended to use larger boards than indoors. You need to drive nails or screws at an angle of 45 degrees – this will allow you to hide the hats with the following panels. Observing these rules, it will be easy to choose and correctly use lining with timber imitation.
How not to be deceived when buying a building material, describes in detail in the video.