Emale PF-266: characteristics and color palette

In our country, there is still a huge proportion of private wooden houses with female floors, just covered with paint. Modern chemical industry offers a wide selection of paints and varnishes, which are created specifically for coating wood products. Among them – Enamel PF-266. What is its characteristics, and what color scheme exists, let’s figure it out.

Emale PF-266: characteristics and color palette

Peculiarities

Emale PF-266 is made on the basis of alkyd varnish. Its production in our country is regulated by GOST 6465-76.

According to the standard, the painting pigment, solvent, mineral fillers. Thanks to this content, it turns out a peculiar suspension, which provides not only decorative function when applied to the tree, but also protects the surface from the negative environmental impact, for example, moisture.In addition, the surface treated with this product acquires a glossy shine.

    Emale PF-266: characteristics and color palette

    Emale PF-266: characteristics and color palette

    Emale PF-266 designed specifically for wooden surfaces. It is intended only for indoor use. Outdoors coverage will have a small operating time.

    In connection with the availability of this product, it is often used for painting floor in public premises, such as gyms, hostels, production warehouses. Private individuals are rarely buying, mainly for the color of the floors in old wooden houses or in the darity at the cottage.

      Emale PF-266: characteristics and color palette

      Emale PF-266: characteristics and color palette

      Emale PF-266: characteristics and color palette

      Emale PF-266: characteristics and color palette

      Before using the EMALI PF-266, it is worth familiar with its technical characteristics:

      • This coating forms a smooth shiny coating on the surface. Glitter film is at least 50%.
      • Enamel gives surface moisture resistance.
      • Well withstands abrasion. Here the strength indicator is 0.25 kg / μm.

      Emale PF-266: characteristics and color palette

      Emale PF-266: characteristics and color palette

      • Perfectly tolerate temperature differences from -40 to +60 degrees. Do not fear the destruction of the coating under conditions when the building is not operated in winter and does not heated. Also paint can be stored and transported under negative temperatures. It will not affect the quality of the product and subsequent operational properties.
      • At a temperature of +20 degrees, its viscosity is 70-100 s.
      • The degree of peer of paint – a maximum of 40%.
      • The consumption of composition per layer is 80 g / kV. M. The number of layers depends on the color of enamel.

      Emale PF-266: characteristics and color palette

      • Paint dries in 24 hours under the conditions of ambient temperature not less than 20 degrees. But completely ready for the load floor will only be through three days. The final strength of the surface will drop only after 2 weeks. The fully dried layer of the film has strength while hitting at least 30 cm.
      • The elasticity of the bending layer is 1 mm.
      • The adhesion of paint composition with a covered surface corresponds to 1 point.
      • Diluted White Spirit.
      • The volume of containers in which the composition is bottled in production, you can meet various. It ranges from 0.9 l to 50 l.

      Emale PF-266: characteristics and color palette

      Emale PF-266: characteristics and color palette

      Colour

      The color gamut enamel PF-266 is quite limited. Here you will not find unusual bright shades, for example, red, blue. The color palette of this product includes only a few tones of brown. Among them are greatly popular with red-brown and yellow-brown enamels.

      Emale PF-266: characteristics and color palette

      Emale PF-266: characteristics and color palette

      Emale PF-266: characteristics and color palette

      Calculation of the required volume

      PF-266 enamel consumption depends on its color. As written above, it is 80 g per 1 m2. But it is necessary to apply paint at least two layers, and for a light golden-orange shade, the number of coatings should increase to three. Based on this, to calculate the required enamel volume, you need for paints of brown and terracotta shades area of ​​the room multiply by 160 g, and for golden tone – by 240 g.

      Emale PF-266: characteristics and color palette

      At the same time, the volume of enamels must be bought with a small margin, that is, rounding the resulting paint quantity in the large side of the volume sold.

      Application rules

      So that the coating that forms the PF-266 enamel was resistant and beautiful, You need to perform work in several stages:

      • Surface preparation. At this stage, it is necessary to clean the surface from pollution and dust. For this, the floor is washed with soap solution, and then rinsing with clean water. After which the paint is removed from the surface, if there is something available, and the floor is washed away again.
      • Painting preparation. The bank opens, a film is removed from the suspension surface. Next, the composition is well mixed. To do this, you can use a wooden blade. Enamel, spilled in the tank of increased volume, it is better to mix with a special mixer.

      Emale PF-266: characteristics and color palette

      Emale PF-266: characteristics and color palette

      • Dilution of the composition. If necessary, the Emale PF-266 can be diluted with White Spirit. In this case, its number should not exceed 10% of the paint itself. That is, in the amount of enamel 1 kg, only 100 g of solvent can be added.
      • Application. Emale PF-266 can be applied with brush, roller or paintopult. The tool is worth using depending on the floor area, so for the color of the plinths you can use the brush, and the floor itself is painted with a spray or roller.

      Emale PF-266: characteristics and color palette

      Emale PF-266: characteristics and color palette

      Emale PF-266: characteristics and color palette

      Since the paint is applied at least two layers, for drying each coating should be taken for a minimum of 24 hours. When applied, it is worth remembering that the alkyd varnish is pretty toxic and you should use the respirator and gloves. In addition, at the end of the work, the premises should be well ventilated to avoid poisoning.

      The difference between enamel PF-266 and PF-266M

      First of all, Emale PF-266M from PF-266 distinguishes the material on which the composition is applied. PF-266M paint can be applied, except for wood, and on concrete surfaces. It is also made on the basis of alkyd varnishes.

      The composition differs only by the introduction of additional fillers, which allow you to increase the adhesion of this composition with concrete floor. In this case, all specifications are completely saved.

      Emale PF-266: characteristics and color palette

      Emale PF-266: characteristics and color palette

      The way of removing the enamel of PF-266 can be viewed in the video below.

      Rate article
      ( No ratings yet )
      Share to friends
      Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
      Add a comment