Differences of plywood from chipboard and fiberboard

The range of finishing and building materials allows you to find the perfect option depending on the scope of use. Innovative technologies led to the emergence of a rich diversity of raw materials and methods of its processing. Each product has certain technical and operational characteristics. Consider Read more Differences of Plywood from Chipboard and Fiberboard.


To compare several product options, you need to give a characteristic to each of them and designate features.


This abbreviation refers to “wood-chip slabs”. The material is made from production waste, which are obtained when processing expensive wood, and cheap breeds are used. After drying, cleaning and other processing, raw materials. It is crushed and mixed with special solutions. The material obtained is passed through the press and permanently high temperatures. Formed sheets differ in texture and other indicators.

Laminated plates (LDSP) received great distribution. To align the horizontal surface, use untreated sheets. As well as widespread water resistant plates.

With competent use, one can arrange a single plane.

DVP (organite)

The second name of this material is organic. Reduction Indicates “Warm Plates”. This product belongs to the economy-class category. Basically, a solid variety of organics is used, which is manufactured using a “wet” method. Used in the production of raw materials prepare, shredding to the desired consistency. After special impurities and components are added. The resulting mass must be kept in the container, and after squeeze with the help of the press and handle with high temperature.

Fiberboard is divided into separate categories depending on the density, hardness and facial layer. So that the plates have become moisture-resistant, manufacturers use paraffin. Fiberboard sheets are often used for flooring, while they cannot be used as a rough coating due to insufficient thickness. This type of building material is remarkably suitable for alignment of the surface before installing parquet or linoleum. Some types of organics can be used as a major facing. Choose dense and solid sheets that are stained after laying.

Important! The two varieties described above are often confused with other types of materials, for example, with plywood. Despite the external similarity, each product is unique in its own way.

Comparison of characteristics

The comparative characteristics of each product represented by the construction and finishing materials market clearly demonstrates that in common between the plates and what the differences are. To select the most appropriate option for a draft or finishing of sexual design, it is necessary to take into account the main parameters of products.

What is safer?

Safety for the environment and health – This parameter is one of the main. There is no accurate answer to the question of which options eco. It all depends on the quality of the product. The process of production of wood plates must comply with certain standards and standards. These indicators are documented.

If in the manufacture of DVP from high-quality and selected raw materials, the material will not represent even the slightest threat. The second kind was the cause of disputes from specialists. The fact is that formaldehyde resins use for gluing plates. Because of this, the chipboard is considered more harmful, compared to fiberboard.

Wood-chipboard should be marked E 0.5 or E1.

What is stronger?

This characteristic depends on the density and structure of sheets. Areas of application DVP and DSP differ. Sheets made of compressed chips thicker and stronger. Warm sheets are not used to align voids because of their bending instability.

What larger?

The width and length indicator in the two above materials is practically no different. The difference lies in the thickness. DPS plates, which are used for horizontal surfaces, has a thickness of 16 to 22 millimeters. Such sheets without problems will be transferred to an increased load.

The thinnest material, among other types of wood products (plywood, DPS, etc.), is organitis. Its maximum thickness reaches 7 millimeters. The average number has 3.2 millimeters. Thunderstorm, naturally, harder, if compared with thin sheets.

Important! The differences between the two types of products are insignificant, but they are and must be taken into account when choosing and using material.

Scope of application

Scope of use of wood plates diverse. Chipboard and fiberboard have long found their use in the manufacture of furniture. Manufacturers use this product due to simple processing and affordable prices. Some attracts a neat and aesthetic type of material. Despite these advantages, chipboard and fiberboard are significantly inferior in the strength of natural wood. Furniture manufactured from pressed material.

To give furniture more expressive and attractive appearance, specialists use coloring compositions and synthetic coatings. Motions made of sheets that mimic natural raw materials are very popular. And also Feds and Chipboard found their use in the production of acoustics, including subwoofers. Sheets have the necessary strength and low weight. As a result, it turns out practical musical equipment with a slight weight.

Some types of chipboard are actively used in construction. Of these, reliable interior partitions are obtained, which can be made with their own hands and install without the help of specialists. Above, we noted that the plates also found their use as an additional flooring. From the fiberboard often make the rear walls of furniture and drawers. The use of plates reduces the cost of the finished product and its age. Fibrous sheets are used to finish loggias and balconies. With their help you can warm the location or close it from prying eyes.

Owners of private houses also drew attention to the woody building material. It is used as an additional thermal insulation. From sheets are light and practical temporary buildings that will be useful in the garden or garden.

In this case, it is recommended to use moisture-resistant chipboard panels.

What to choose?

There is no accurate answer to the question of which of the above materials is the best. Each option has the characteristic features to which you need to reference when choosing. Before you go to the building and finishing materials, you need to decide on the purpose of the wood plates. One option is better suitable for horizontal surfaces, the other is a practical choice for facing floors. To make the right choice, you need to get acquainted with the features of each option.

It is necessary to pay attention to the following criteria:

  • strength;
  • thickness;
  • height and width;
  • compound;
  • appearance (color, texture, imitation of another coating);
  • Resistance to moisture;
  • price.

Important! The price of the product depends on its quality and complexity of the manufacturing process. As a rule, the chipboard is more expensive, compared with the Fiberboard. The second option is cheaper by about 50%.

When choosing a material for the floor, it is worth considering the following features:

  • When using ceramic tiles, make a choice in favor of the chipboard; Only sheets with special impregnation from moisture and dampness are suitable, since only such plates will have the necessary technical and operational characteristics;
  • Orolete remarkably demonstrated itself in combination with a wooden base; With the help of sheets, you can align the horizontal surface, and after covering it with boards;
  • If you have made a choice in favor of the “dry” screed, it is recommended to use chipboard;
  • Another practical and common duet – laminate and fiberboard.

On the differences of plywood from chipboard and fiberboard, see the following video.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: