Differences Choosing Paints for Tree

The tree is very good and in demand in construction and decoration material. His advantages contribute to improving the appearance of various surfaces.

One of the frequently used finishes of this material – staining, for the successful execution of which you need to carefully choose the coloring composition.


Making residential rooms with paints and varnishes easy. It is only necessary to strictly observe certain conditions.

The finish must quickly fall asleep, not to have an outsider aroma (or have a unreasonous smell), differ environmental and sanitary safety.

The choice of ideas for registration is quite large, and it pleases many consumers.

Before considering the benefits and disadvantages of individual species of wood paint, you need to find out what is the required requirements for any composition.

They are as follows:

  • elimination of cracks;
  • Prevention of fungal (especially mold) infection;

  • preservation of a favorable appearance in any situation;
  • Durability (including high resistance to mechanical influences).

If at least one of these requirements is not met, we can assume that the composition is incorrect. Poor processing leads to the same result as a complete lack of treatment – a couple of years will pass, and wood will darken and cracks.

Unlike metal coating, stone or brick, for wood, it is necessary to use not only the painting composition, but also special oil and varnish.


Wood paint is often a special coating for external facade works. Such material effectively restrains the impact of moisture and is not destroyed, even if the sun’s rays are heated strongly.

  • Acrylic The basis is environmentally friendly, it does not have an unpleasant smell and does not overlap natural wood. It gives the painting the ability to resist the cold, with its help you simulate absolutely any shade. Water base, in contrast to synthetic materials, safe for human health. Acrylic paint is suitable for internal works, when coloring the floor is chosen, because it is possible to easily mix the necessary components.

It is important to take into account that it is not frost-resistant, so it is necessary to store such a composition solely with positive air temperature.

It should also be constantly protected from contact with any kind of moisture.

  • For wooden doors you can apply Perchlorevinyl paint KH-161. All dyes of this type give a rich thick color, quickly dry and thoroughly “grab” with the surface. The Red-161 formulation provides for the introduction of heavy portions of plasticizers. Normal temperatures during operation of the composition range from -20 to +40 degrees.

Drawing perchlorvinyl paint in one layer allows you to limit its consumption, but it is advisable to paint the surface twice.

Aggressive external environment is transferred to paint easily, but it should be verified that the base is quite well prepared and does not contain cracks and chips.

It is not allowed to paint wood with perchlorvinyl mixtures over acrylic paints, lime, silicate and silicone coatings of any purpose.

  • Coloring compositions in the canopy Good to the fact that they allow you to reliably prevent typical problems – the formation of sublishes and the difficulty of forming a homogeneous layer thickness on the entire volume of construction. In addition, any aerosol paints are always quick-drying. As a chemical basis for them, manufacturers use nitroemal, alkyd components and acrylic resins. Each modern formulation has been worked out to the smallest detail, and it is possible to apply all these varieties of coloring compositions with practically no limit.

  • Semit acrylic-based spray, You can use it for external work, and when painting indoor walls and interior items. To one layer of drying and acquired all the necessary properties, you will need a maximum of 20 minutes. Such a coating almost does not fade, serves long enough. A variety of appearance is impressive, you can calmly choose even the color of the wenge.

It is important that with the help of acrylic mixtures even attractive wood paintings are formed. It will hobble all who are interested in the artistic ways of interior design, and loves elegant details.

  • Water-repellent paint For wood it is recommended for premises with a high degree of humidity. The compositions of the most different species are in this category, but water-dispersion paints are recognized best on the ratio of practical qualities. They are absolutely safe for humans and animals, can have a glossy or matte appearance after applying. Such paint makes it easy to maintain the optimal microclimate in any room.
  • If you do not trust industrial products and you want to make a completely safe dye yourself, suitable Dairy paint (There are a number of similar compounds). In addition to skimmed milk in her recipe, the alcohol vinegar, hated lime and certain mineral pigments, which are specific species depend on the purpose of paint.

  • Brown paint, Reminder rosewood surface looks exquisitely and noble in almost any interior. Enamel can also have this shade, although in the chemical composition and other parameters it is quite far from the paints in the usual understanding. After applying the enamel layer, the basis with it should be thermal processing to form the most strong and resistant to destructive effects. The most reliable wear-resistant paint on the tree of such processing does not require, but also its protective properties are somewhat weakened. It is precisely because of low resistance to wear and mechanical load, all water-based dyes cannot be used for wooden floors.
  • Two-component paint on wood, regardless of the specific composition, most often better than the one that includes only one component. Thus, polyurethane mixtures form little sublishes (and when compliance with technology does not form them at all), even a significant mechanical load is easily transferred.


The number of paint consumed by 1 kV. M. wooden surface, always more than when painting metal, plastics or even stone, because the tree actively absorbs the dye. The exact figure is determined taking into account the dilution of the mixture, the complexity of the geometric shape of the surface, the number of layers preceding the processing and other factors. Amendments to the humidity and porosity of a specific sample of wood can be neglected.

The type of coloring composition is also taken into account, pre-applying primer reduces the need for it.


Inside the house, the color tonality can be the most different, it is dictated by design considerations. With any work, including outdoor, the choice of wood color requires preliminary definition of tasks. If you need to harmoniously combine the construction with the surrounding landscapes, it is advisable to use green and brown tone, And if you wish, the house is used to highlight red and orange dyes (both individually and in various combinations).

In addition to these tasks, a designer solution can also have other functions: disguise the external disadvantages of construction, visual change in design geometry, strengthening or reduced natural illumination. In hot areas it is advisable to cover the roof and other facade details with light paints, And if you live in the territory with a colder climate, it is worth preferred to dark surfaces.

Both outside the house and inside (albeit to a lesser extent) thick juicy tones burn out much more than less saturated. Therefore, for staining of a wooden wall or an open terrace sun, light shades should be used. But note that white paint can quickly ship, in addition, on the gray surface it is very difficult to notice the appearance of dust, and even after many years she can only change the shade slightly.

Architects, seeking to create a sense of maximum building, constantly use light, almost transparent paints. Their designers follow and designers when you need to increase visually separate room or part. At the same time, along with the demonstration of the exquisite interior, it is necessary to comply with the laws of color combination.

Excessive passion for beige and cream tonality can make the facade or the wall of the room with dim and unbroken. But if you skillfully combine them with dark colors, it turns out an elegant, attractive embodiment.

If the design (product, architectural element) is distinguished by a complex geometric shape, it is also necessary to paint in light tones. Isolation of bright colors is suitable for objects of simple configuration that do not have small parts.

Yellow or Golden Wall is perfectly combined with a window and a door that are made of dark wood. But in most cases, designers use a more traditional option – combine white and black paint in the interior on the principle of contrast. External white walls are most beautiful if there are many greenery around. But the gray tone in such a decision seems faded and inexpressive. It is preferred to pay the brightest design elements.

Matte paint can not give such elegant shine as glossy, but It does not mask the texture of the material. For staining of wood, this moment is especially important. It concerns not only the design of facade walls, but also the creation of art crafts. Translucent paint gives a similar effect, opening the source texture even more. Luxury paints and varnishes can be initially melted or unloaded, in the first case it is necessary to find out how safely the roller.


It is important to remember that the choice of specific paint is determined by the peculiarities and functions of the wooden surfaces to be separated.

  • For the stairs inside the house you can use a fairly wide range of dyes. When the original pattern of the tree is very elegant, and you do not want to hide it, it is worth using non-paint, and a varnish with a glossy or matte effect. Save texture will help light paints applied without prior priming surface. Along with these parameters, it is quite important to rapid drying and the absence of persistent concentrated smells.
  • Steps need to cover the composition that differs as high as possible mechanical resistance. If your staircase is outside the house or will be used mainly on the street, it is recommended to use wood paints for outdoor work.

  • Difficulties often cause paint for windows, as they are very diverse and differ in their characteristics. Mandatory requirements for staining the outer side of the windows are resurable to the action of moisture and cold, effective countering microorganisms, minor abrasion and fading even under harsh operating conditions.
  • When the paint does not meet these requirement, it cannot be called suitable for operation. But the level of toxicity is not so critical, so you can calmly choose the most resistant to various factors. Ask how paint will be plastic, because it will experience a lot of temperature differences.

What to choose?

Before painting a tree, you should consider several of the most important points:

  • breed of processed design;
  • conditions in which the product is used (will be applied);
  • whether the coating is applied for the first time or on top of the former layer;
  • What should be the appearance of the surface after painting – transparent or not at all skipping light.

Ophpatic coloring mixtures for wood almost always belong to one of three groups: alkyd, acrylic or oil.

  • Alkyd paint Easily survive even Siberian frosts and quickly dries, but it is not suitable if it takes deeply soak wood. Usually such compositions are needed for the design of the street door, the window frame or facade.
  • Paint based on acrylic resins It is considered more modern and practical, but its cost is quite high. Expenditures are justified if you want to make a fully safe game room or street construction. Wood will “breathe”, and you can apply acrylic paint not only with a brush, but also by any other tool.

  • Oil paints Practically out of use due to their toxicity, a small compatibility with other dyes (with re-staining), unpleasant odor and high risk of sublishes. In addition, these coloring mixtures are more expensive than more convenient acrylic paints.

The only case when the dye on an oil base is advisable to use, is the need to reduce the amount of work and thoroughly soak wood.

  • For decor you need to choose Fasteners, which protect the wood from the destructive environmental impacts. The advantage of such substances is the formation of the maximum thick outer layer. Deep penetration into the material and the impossibility of damage to the painted surface with water is very important when finishing the outer surfaces of the building.

Manufacturers and reviews

Building paints are produced by many firms, but not everyone produce really high-quality and decent products. The attention of the products of the Finnish company Tikkurila are drawn to the product, for many years they have been occupying one of the leading positions in the Russian market. Among the paints presented under this brand most often buy silicone mixtures. Skillful application allows you to give the painted surface not only glossy or matte shine, but even imitation of textures such as satin and mother of pearl.

Scandinavian developments miss steam, and this means that there will be no stagnation of moisture. They will serve for a long time, Completely safe for people and nature are practically not affected by mechanical exposure. Consumers note the positive aspects of these coatings as minimal pollution and a relatively small consumption of material.

For facades of private houses, paints are widely used under Brand “Kaparol”, Because choosing among them the dye suitable for you the tonality is not difficult. It is not necessary to worry for the service life, environmental and sanitary safety. Most often used azure, which allows you to separate external structures – roof, upholstery materials, enclosing elements, frames, wooden gates and shutters. In the line “Kaparol” there are solutions that allow you to maximize the texture and color of wood.

Slovenian company BELINKA produces a wide range of colors and means that protect the surface of the tree. All of them are designed to emphasize the natural texture, you can give the surface anyone as you wish. Toplasur UV Plus blocks ultraviolet rays very well and converts wood type with the most sought-after colors. Judging by the reviews, the first layer requires a lot of paint consumption, but it is he who allows to focus on the structure of the tree.

German paints Zobel fully comply with the requirements of Russian standards and practical terms of use. Even with the strong exposure of the cold, they show themselves from the best side, The undoubted advantage is also the ability to compose paint individually.

Guaranteed service life without peeling, as can be seen from many reviews, is at least 5 years even for facades of houses.

Products Biofa It is considered quite perfect, but it is necessary to take into account that it is more like oil for treating a tree with coloring effect, and not on paint. You can apply such formulations only on a well-orange and polished surface.

Dufa represents a fairly wide range of painting compositions. All of them are water-free (environmentally friendly) and may be selected for certain conditions of application. There is a moisture resistant on the market (in need of caller) and the most bright coloring compositions. Products about this company exclusively positive.

Sikkens For about two centuries, there are excellent paintwork materials that allow not limited to typical solutions and create a truly original interior. Users note the ease of searching for the necessary shades, very favorable prices and ease of use of varnishes and paints of this manufacturer.

Successful examples and options

Consider some good wood coloring options in various compositions.

For the terrace you need to pick up the paint individually, as accurately as possible, given all the features of the specific tree of the tree. There is no doubt that open areas of wood need to be painted darker, so that street dirt and dust have a smaller negative impact. At the same time, for the interior board, such a requirement is not always presented, but only by designer considerations.

Staining under the “older” does not always mean the use of the patina effect, but it should use darker and saturated tones. The picture is clearly visible as they replace the original bright wood background.

The use of polymeric paints is justified by their high penetrating ability, low susceptibility to ultraviolet rays, chemical and atmospheric resistance.

You can choose red, lilac, yellow or green tones – they will all look equally attractive.

Wood painting technology will see in the following video.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: