Hykovit is an indispensable assistant when you have to perform a large amount of work. In the market, many manufacturers who were able to establish themselves, and among them especially allocated deWalt.
DeWalt is an American manufacturer of high-quality power tools, and wrench – not the only category it produces on its factories. Production is scattered almost all over the world, there is in China, Mexico, Germany and other countries. The company was founded in the distant 1924, during which time it was possible to achieve high quality products, introduce its own developments to the market. All products, including wickers, are distinguished by high quality, reliability, available cost. Moreover, they comply with world standards, so successfully used in our country.
The devices from the battery are operating, specifications depend on the user-chosen model.
DeWalt is electrical, impulse or shock wrench that may have a weight from 2 to 5 kilograms.
The rechargeable tool is popular because it is autonomous and does not require a power source so that they can use. On such aggregates there is a regulator responsible for setting up the power and the mechanism that adjusts the number of revolutions. Their work is based on impulse rotation, and when choosing the consumer should pay attention to:
- Power of wrench;
- battery capacity;
The last indicator in the models of this manufacturer is presented in the range of 100-500 nm. It depends on the diameter of nuts that can be twisted. Battery capacity and operating voltage indicate the performance of the equipment used. One of the bright representatives of this class is dewalt DCF 880 m2 with an XR Li-Ion battery, a maximum torque of 203 nm and a number of shock per minute 2700. Aggregate weight 1.5 kilogram.
Electrical models can be more powerful, they work quische by rotating the existing drive that is transformed into pulses, blows. From how the direction of the movement put up the user depends, the nut is spinning or twisted. Such aggregates can be used even with elements whose thread size reaches 30 mm.
Most of these models are the power regulator. They demonstrate high performance, food is made from the standard network. The torque is adjusted in the range from 100 to 500 nm, on the percussion models the frequency per minute is 3000 beats.
So that the engine does not overheat, a fan is provided in the design. On the case there are fasteners for an additional snap. Be sure to pay attention to the Dewalt DW294, the total weight of which is 3.2 kilograms. This model is in demand for the maximum number of revolutions per minute of 2200. This is a shock unit that makes 2,700 shots, and the maximum torque is 400 nm. Can work with a maximum bolt diameter of 20 mm.
Instructions for use
Before starting working with a tool, the manufacturer recommends always to check it on. To do this, it is enough to examine the presence of explicit damage. If when you turn on the network, the smell of plastic appears, or go smoke, the wrench is turned off immediately. All moving items must be well attached if there is experience, it is better to view, whether all the nodes are assembled true. If you are repaired, then in the absence of experience, you should trust it with professionals or need to follow strictly instructions.
If the power button is defective, the tool is forbidden to use. You can use with electrical models extension, but only the input power that the wrench has a wrench. If the cable is in the coil, then it is completely unwound. Before configuring or collecting a wrench, it is defined from the network.
In the next video, you are waiting for an overview of the brushless shock wrench DEWALT DCF899.