COLOR SIDING “Under Brick”: Select material for facing

Cell siding panels, made under brickwork, are conveniently mounted on the surface due to the correctly selected manufacturing format. In addition, this material can be applied to the already finished material wall. At the same time, the requirements for the quality of the working surface do not have strict criteria, as when finishing with other materials.

Especially relevant this property becomes when the wall has serious defects, it is impossible to fix that with insignificant means of type plaster.

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

Facade siding, imitating brick, is produced using polymer casting technology. Raw materials for its manufacture optimally chosen under the operational features facade finishing materials faced. Panels “under the brick” – relatively new material, produced according to modern technologies on the latest equipment in accordance with European quality standards, which provides a long service life and high resistance of products to various negative impacts.

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

Advantages and disadvantages

Choosing the material of the finish, it is important to take into account what kind of benefits is one or another type of finishing materials.

Social panels “under the brick” have many positive qualities.

  • Mass finish. The small weight of the base siding significantly increases the load on the foundation of the building than the trim brick.
  • Simple montage. Money and time spent on the installation of siding, many times less similar work using stone or brick.

COLOR SIDING "Under Brick": Select material for facing

  • Weak site clogging. Installation of panels is made with minimal pollution of the surrounding space, in contrast to masonry operations using a cement mortar, accompanied by high dust and small garbage.
  • Long service. Modern production technology provide warranty period of operation of panels up to 50 years.
  • Easy in circulation. Siding is easily cleaned and washed, does not require special care conditions.

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

  • Wide range of. Unlike the analog materials, siding can imitate almost any texture and at the same time be the desired coloring, a pleasant appearance is preserved throughout the entire period of operation.
  • Economic access. Panel cheaper analog trim facing bricks, visually appearance is almost identical.

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

  • Preservation of air exchange wall. When carrying out installation work on the established factory procedure, the finishing material will not impede the normal air exchange wall. This will affect both a pleasant “non-stitching” atmosphere inside the house and in the absence of a rejection of structures that promotes their destruction.
  • Additional insulation. The framework on which siding is mounted, allows you to place inside the heat insulating materials, for example, polymer wool, and no additional installation work is needed and the insulation finish.

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

But also the base panels under the brick have its weaknesses, they include:

  • PVC is a fairly specific material, working with which it is necessary to take into account its ability to compress and expand under the influence of lowering and increasing the temperature, otherwise the facade finish will not last long;
  • Some properties are weaker than that of analog materials: bricks and stone, such as strength or durability;
  • Externally, the plate imitates the brick well, but if you look at close range, it will become clear that this siding.

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

Specifications

From an operating point of view, the base siding under the brick has such properties:

  • resistant to differentials, maximum and minimum temperature values;
  • Siding is not porous, which causes its high moisture resistance, as a result of which the material does not depair and does not destroy;
  • Another consequence of moisture resistance is the absence of fungal mold on the surface of the plates;

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

  • universal in circulation, can be used in combination with other materials for trim;
  • High resistance to aggressive phenomena of nature: snow, hurricane wind and other;
  • The color of the product will not fade and does not fade, while maintaining a pleasant external period of operation;
  • Durable and durable, not resolve, does not crack in any operating conditions.

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

Views

The gradation of the base siding occurs on the main component of the manufacture.

Vinyl

The main component – PVC (polyvinyl chloride), products are distinguished by a variety of dimensional execution and texture, extremely definitely imitating masonry facing brick. When finishing the base of the house, this material needs to consider the property of vinyl to a linear expansion, which should be reflected in the correct placement of the panels during installation. Otherwise, when the temperature drops, the adjacent products deform each other.

To other material features include:

  • Low weight provides an easy and simple process of installation of products;

COLOR SIDING "Under Brick": Select material for facing

  • products can be easily adjusted by size by cutting;
  • high resistance to deformation processes;
  • high heat insulating indicators;
  • powerful waterproofing properties;
  • Not subject to the devastating effects of ultraviolet and infrared radiation of the Sun;
  • Resistance to differentiaries, upper and lower temperature limits.

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

Metal

The main material is one of the metals suitable for these tasks: galvanized iron, steel, aluminum. Each option has characteristic advantages and disadvantages.

Aluminum features include:

  • The ease of structures, respectively, is facilitated by the process of installation work, and the material for its fix must be less;
  • not subject to corrosion;
  • less resistant to mechanical loads;
  • Easily succumb to coloring.

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

For steel saidding panels are characteristic:

  • high strength;
  • susceptibility to corrosion processes;
  • relatively large weight material complicating panel mounting.

Galvanized iron panels, made under brickwork:

  • Does not be corrosion;
  • relatively heavy, approximately 2.5 times heavier than aluminum, became somewhat lighter than steel;
  • relatively durable.

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

Cement

For the manufacture of panels, a cement solution with cellulose fibers, reinforced with synthetic additives. Fibro-cement siding is obtained by pressing the mixture. Before installing the work surface must be carefully prepared, otherwise the panel does not hold out on the wall.

The characteristic properties of cement siding are:

  • strength;
  • frost resistance;
  • resistance to weather phenomena and sunlight;
  • durability.

COLOR SIDING "Under Brick": Select material for facing

Features of choice

When choosing a material imitating brick, to finish the base, it is worth considering some factors, including those that strongly affect products.

The main part of the cost of finishing panels forms used raw materials. Foreign analogues: European or American, for production is used standardized raw materials, certified and many checks, respectively, the price of such products is significantly higher.

Also imported products after production should be transported over long distances, which ultimately imposes its mark on the price.

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

Corporate product is better to buy from the official dealer of the brand – they have the price itself low, and there is no risk to buy low-quality products without warranty. Preferred better known brands manufactured by products on factories, and not in handicraft workshops.

The main indicator of the properties of the base panels is their composition, It is he who defines the operational properties of products, if the domestic producer uses good raw materials, the quality of such panels will be slightly inflicted by imported.

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

Brands of manufacturers

Although the material is relatively new, the market shows a fairly wide selection of products, high-quality siding panels “under the brick” produce the following manufacturers.

  • “Dolomite”. Produces panels with imitation of stone in three main rules: “Monotonous stone”, “scratched stone” and “exclusive”. The size of the products produced 30 cm x 22 cm with a thickness of 1.6 mm and specific weight in 1.8 kg.

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

  • Docke. The manufacturer offers panels imitating brick laying, stone and layered sandstone. High quality at an affordable price made this brand very popular.
  • “Alta Profile”. Russian manufacturer of siding panels. In the range of companies with brick texture, laminated stone and canyon.
  • Fineber. Also domestic manufacturer from Novosibirsk, which offers siding panels imitating facing brick performed in red and yellow.

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

COLOR SIDING "Under Brick": Select material for facing

Calculate the required volume

After selecting the brand of baseline siding that satisfies all the criteria, you need to calculate the amount of material that will be needed for facing at home.

To do this, do the following. The area of ​​the separated surface is calculated by multiplying the length and width of the base.

It should be borne in mind that when processing and installing panels, the average damage of the material, in the process of fitting the plates, they subsided, chipping and other points, approximately 10%.

COLOR SIDING "Under Brick": Select material for facing

                Costs when installing increase with an increase in the length of the surface of the surface, The same rule acts in relation to the front plates than they are longer, the greater the addition to the adjustment. Profile and rails, from which the framework is built, there are no such problems, although they are worth buying not in principle.

                To find out the more accurate volume of the material that will be needed to finish the base, you can contact the seller-consultant in the store or to the online support service on the manufacturer’s website.

                COLOR SIDING "Under Brick": Select material for facing

                COLOR SIDING "Under Brick": Select material for facing

                About how to disassemble siding to not disassemble the whole wall, look in the following video.

                Rate article
                ( No ratings yet )
                Share to friends
                Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
                Add a comment