Choose the nozzle on the drill for sharpening drills

With frequent application, the drill appears the need for their sharpening. The modern market provides different devices for the implementation of this task. However, few people know that with the help of an ordinary electric drill today you can sharpen the drill. This is obtained due to all sorts of accrehensions and nozzles that make it possible to create a multipurpose device from a drilling device.

One of the similar devices is the nozzle on the electric drill electric drill, which, in the absence of emery and grinding stone, makes it possible to correct the form of drill and return the functional properties.

Distinctive features of the design and principle of operation

The structure of nozzles on the electrodes specializing in the sharpening drills, has a plastic shell within which the rotating sharpening circle is located. This is the surface of a specialized form, which creates the necessary sharpening angles on the working elements of the cutting tools.

Sharpened the nozzle is powered by the rotation of the electric drill shaft, with which it combines a specialized coupling.

Most of the newest samples of nozzles on the electric drill for sharpening the toolkit is equipped with an end cap on the casing, which are located. The diameter of each of them is proportional to the specific size of the drill.

These holes are performed in this way that the drill, the working area of ​​which is placed in them for sharpening, will be in contact with the working plane of the sharpening stone exclusively in a certain position.

The sharpening drill, carried out using a similar nozzle, occurs as follows:

  • The drill, the cutting area of ​​which should be supplied, is introduced into the hole in the housing cover, which has a suitable diameter.
  • The electric drill runs to work, as a result, the grinding stone begins to spin. A sharpening of one side of the working surface of the drill is performed.
  • The drill is scrolled in the opening of the nozzle of 180 degrees, and the sharpening of another cutting edge is made.

The operation described above is done several times, until the working part of the drill is brought to the necessary characteristics.

There are simple variants – without an end cover. They are primitive than a regular device, but to use them extremely uncomfortable. It is necessary to closely monitor the correct location of the rapid surface and the cutting edge of the drill.

This sharpened drill on an electric drill can also have a much more unassuming structure, where it is not provided for the presence of a lid nor the technological holes that are the conductor. Practice such nozzles are very difficult, they are uncomfortable for the reason that it is necessary to hold the drawable drill in the right position. Additionally, you need to withstand proper angles on the cutting part.

Positive moments and disadvantages of use

Giving an assessment of the rationality of such nozzles on the electric drill to sharpen the drill, it is necessary to designate that they are absolutely not intended for frequent and active use.

To a number of their positive moments, you can rank:

  • Small price of products. This is caused by the easy-to-fit design.
  • Easy use. Use the device is pretty easy, with this in the forces to cope even beginner. In contrast to the sandpaper, sharpening on a specialized nozzle not only simply, but also very quickly.
  • The possibility of applying a device for various drill diameter. Having great value factor that makes it possible to sharpen a large amount of parts from the home collection by means of a single nozzle.

The described device has the following negative points:

  • Impossibility to produce full-scale sharpening. Although the manufacturer also says that the device is intended for sharpening parts, actually nozzle specializes, most likely, for editing the cutting edge of the filled drill.
  • Not inspiring confidence fixing device on the cartridge Electrodel. The vast majority of manufacturers produce nozzles with a plastic stopper, which is committed in order to reduce the product.
  • Impossibility of changing sharpening angle. The degree of drainage is already in advance in the design.
  • Problems in use. In order to use the nozzle, it is required to fix the electric drill in a static position, which will allow for a comfortable use of fixture. At the same time, you need to hold the electric drill with one hand, connect and disconnect it, and the other hand to make manipulation with a drill, directing it into the holes in the lid of the device.

Nevertheless, despite the imperfection, the device found its own user. Thanks to a compact size, minor weight and relatively small cost, the nozzle is well implemented.

Practice her in the household, in “field” conditions, not very large workshops.

Not touching the parties, the analyzed devices are considered fairly effective if they are practicing them directly by appointment.

How to choose how to choose. Use area

The average price of equipment for sharpening – no more than 1000 rubles. Before purchasing, it is necessary to learn the compliance of the purchased tool of the electric drill, for which it is selected.

In any case, you need to measure the landing diameter in advance, but it is preferable to verify directly on the instrument.

The store will definitely be a brand of electric drills similar to your. To certain modifications of nozzles in the kit are reserve emery stones. This is practical and will prolong the service life of the nozzle.

Using the device, you must not forget that it is not professional sharpening equipment. From the very beginning, this precast device is not intended for significant loads.

Interest in such devices is not a simple coincidence. High-quality sharpening from specialists on professional equipment is very expensive, and the presence in the house of similar applications to the electric drills, which is available in almost everyone, guarantees the impeccable state of all cutting faces and surfaces.

As mentioned above, it is necessary to select the nozzle in proportion to the modification of the electric drill. You need to pay attention to devices of eminent companies. Most electrical tool manufacturers produce devices that are flawlessly suitable not only to their own products, but also to the electric drills of other companies.

The optimal option is if the nozzle is included in the electrode itself. Before the acquisition, it is necessary to determine the type of the necessary sharpening and the diameters of the drill, which in most cases are used to ensure that the nozzle operation is extremely effective.

Details for picking, spare parts

The ideal option for acquisition is a nozzle with reserve emery circles. If possible it is necessary to buy a holder for fixing the electric drill – it will significantly simplify the problem, especially if the sharpening will be performed quite often.

A guide is attached to any device that will help in mastering the new tool option. The ordinary sandpaper is intended for several dozen working cycles, therefore, it is possible to calculate the planned load and acquire details of the systematic.

Reviews

To what extent is effective, the use of nozzles for sharpening, the views of the owners diverged. Efficiency is regarded completely differently. Some consider adaptation too weak to practice it constantly. According to other things, the nozzle is simply indispensable in specific circumstances.

Based on the reviews, it can be concluded that if you do not impose to the adaptation of the too large queries, it will detect itself very effective.

Summarize

Nozzle on an electric drill for sharpening drills – a pretty necessary acquisition when you often use drilling snap. With it, it can be seriously saved on service companies. It is only necessary to commend the potentials of this product to not overload it too, in order not to.

Of course, an electric drill, even with a similar device, is not able to replace the emery machine, nevertheless, when needed to sharpen a drill in a home environment, it will provide such an opportunity.

On how to use the nozzle on the drill for sharpening drills, see the following video.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment