Choose a drill for furniture loops

Drill a hole for the furniture loop is not at all difficult if you know what kind of nozzle for this. Both choose and The use of a suitable drill on the purpose has its own specifics.


Drill for furniture loops is a milling nozzle, allowing you to create holes for further cutting of the corresponding elements. This item has the ability to handle whole wood panels and plastic required width, as well as MDF, chipboard and chipboard.

In most cases The device for looping holes looks like a base with a jumper and three teeth. The edge located in the middle is located exactly in the center of the circle intended for the furniture bowl, after which the rest instantly create a round deepening of the required diameter. As a rule, the depth of the resulting opening does not exceed 9 millimeters. Most of the furniture cups for which the drill is formed by the excavation are 4-hinge. Most often this nozzle is used to install door hinge furniture.


When it comes to drilling for furniture loops, in most cases, this term means its main variety – Drill Forstener.

It is it that is characterized by the most complex design with three episodes and requires the master of compliance with special caution.

Forcener drills are also divided into 3 types:

  • The first is the original structures that are created using milling and “bring to mind” manually;
  • The second has a cast working part and is suitable for machine operation;
  • The third type of drill is formed by casting, and the cutters from the high-speed steel are fixed with the help of welding.

The first variety of nozzles is the most expensive, and the most cheap is the last. The quality of the driver drills varies from high to mediocre.

A variety of drills for furniture loops is also centering or centering, it is self-centered. The specifics of this nozzle is the ability to accurately centered and, as a result, drill an absolutely smooth hole for a screw and twist it. Drills are made of high-speed steel and pressed with screw.

Separate nozzles are also isolated, suitable for non-standard furniture loops: card, bar, antlesol, lonely, secret, deaf, heel and 8-hinge.


Drills for furniture loops are used when creating holes in which the dishes themselves will be guided by. This means that the diameter of the drill must be selected in accordance with the dimensions of the furniture loop. Standard cups have diameters 26, 35 and 40 millimeters.

At the same time, the loops are most often used 35 mm. The length of the tail of the nozzle varies depending on the manufacturer, but, as a rule, does not go beyond the borders of 10-12 centimeters.

On the shank of some drills, especially forstner, not only the manufacturer’s logo is applied, but also the dive depth scale. It happens that the kit includes a part that limits the immersion at a certain level. It looks like a removable metal disk, the diameter of which is 4-6 mm somewhere exceeds the external diameter of the drill. To fix the limiter on the shank, it is necessary to twist screw in its sleeve.

Choice rules

In general, when choosing nozzles for furniture loops, it is important To ensure that its structure is harder than the material of the treated surface. For example, for plastic or drywall, the simplest drill is suitable made of high strength steel. For drilling brick or stone, you will have to purchase a drill with tips from solid metal alloys.

The selection of the element depends on the specifics of the work performed. Forcener drills are usually used for wood and plastic, the thickness of which is approximately 16 mm.

Four-acupuncture loops with a bowl of 35 mm require drills with a similar diameter. For non-standard mounts, drills are needed with the corresponding parameters – for example, about 12 mm.

Choosing a drill, be sure to estimate its appearance on the absence of chips and defects. Acquire items follows in specialized stores, focusing on the average market value.

Tips for use

The use of a specific nozzle is best to consider on the example of the forster drill. In order to cut a hole for the furniture loop, in addition to the cutting element, A number of other tools will be required. The main work will be made using either a hand drill or a screwdriver. Immediately prepare the roulette or ruler, as well as sewn or its analog. Another important tool is a screwdriver or a special bit that allows you to install a self-tapping screw.

Since the cup of furniture loop is crashed into the facade, so as not to spoil the prominent detail, you must first create Marking To find the center of the future recess. The loop as a result should be accommodated in such a way as to be combined both with the location of the shelves and with the location of another fittings on the frame. Recess center is customary to plan approximately 22-23 millimeters from the edge of the facade. If everything is done correctly, there will be about 4-5 mm between the edge of the cup and this edge, which will be enough. You can start drilling only after all the markings are drawn.

The depth of the opening must perfectly fit the size of the bowl. If you exceed this indicator, then the drill will pass through, and the furniture will be spoiled.

To prevent problems Recommended immediately set the limiter on the drill And, of course, be careful.

If the master has to drill a hole for the loop for the first time, then pre-makes sense Strain on the pieces of chipboard. During drilling, the angle of inclination of the tool is worth changing, but quite a bit. This, on the one hand, will accelerate the whole process, and on the other, will reduce the overheating of the drill.

Read more about Drills for furniture loops See in the video below.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: