Calibrated board

In modern construction and finishing of premises, natural materials are becoming increasingly distributed, especially wood. Environmentally friendly product is practical, durable, has aesthetic species. From the existing abundance of wood lumber, the calibrated board is popular, which has a number of positive characteristics.

Calibrated board

What it is?

Definitions for sawn timber are contained in GOST 18288-87. The board is a sawn timber in which thickness is up to 100 mm, and the width exceeds the thickness of 2 or more times. According to GOST, the calibrated board must be dried and processed to the specified sizes. This term is often referred to as a dry planed board. As a rule, this is a very high quality product.

Calibrated board

To get a product, wood is dried in a special drying chamber. The process takes up to 7 days when exposed to optimal temperature. With such a drying, moisture is removed evenly of all layers of material, which avoids subsequently warping, cracking and other defects. In addition, this board does not require shrinkage. Distinctive features of the material – practicality, durability and reliability.

For processing applies high-precision equipment. The board is obtained smooth, with a flat surface. The main characteristic of the calibrated material – it practically does not have deviations from the specified sizes and corresponds to the standard (45×145 mm). For the usual board, the allowable deviation is 5-6 mm, and if there are bitch and cracks, it can be large.

Calibrated board

A permissible deviation for the calibrated board is a value of 2-3 mm, while the whole length of the product is taken into account. Such a manufacturer accuracy is very convenient and practical during construction and finishing: items are carefully customized to each other, without requiring additional manipulations. Therefore, work happens faster, and buildings are obtained better, there are no cracks in them.

For the production of calibrated board use wood coniferous rocks.

Calibrated board

Pros and cons

Material has many advantages.

  • Can be used for various construction industries. It is suitable for the construction of structures, overlaps and internal and external finishing works.
  • Does not require additional preparation, the product is ready for use immediately after purchase.
  • Accurate fit elements. The absence of slots allows you to maintain heat in the construction.
  • Resistance to moisture, fungus, putrid processes, temperature drops.
  • Environmental purity, harmlessness for people, animal, environment.
  • High reliability, durability.
  • No deformations.
  • Suitable for use in different climatic zones.

Calibrated board

Minus it can be assumed that the calibrated board is 1.5-2 times more expensive of a non-stroke board. However, when working with the use of high-quality material, its rejection is minimized.

Views

To better understand the advantages of the calibrated board, you should understand the types of sawn timber. Each of them has its own characteristics and preferential applications.

  • One expensive and high-quality materials is a dry board. So called the sawn timber, the processing in the drying chamber. Such a product is not deformed and not crackdown, it is not dangerous of fungi, rot, and darkening appear only under the condition of gross violations of the storage and operation rules. Made of dry material construction constructs that should look attractive.

Calibrated board

  • Wide application finds a cutboard. It can be both raw (humidity indicator more than 22%), and dry (humidity rate is less than 22%). The edged it is called because from the edge cut the bark. Scope – external and interior decoration, manufacture of partitions, floor, ceiling.

Calibrated board

  • Universal material consider a planed board. All of her parties are processed on specialized equipment, she has geometrically correct sizes. Finds frequent use as finishing material and in the manufacture of furniture, as it has a surface of good quality.

Calibrated board

  • Tighter use of the material with the fabric, that is, with beveled edges. The chamfer can be located both on both sides along the boards and throughout the perimeter. Such a cut is often made on floor coatings for technical and aesthetic purposes.

Calibrated board

Where used?

Calibrated board – widely used material in different branches of activity.

  • Building. Suitable for frame house-building. From her you can build a hospostroy, bath, gazebo.

Calibrated board

  • Furniture industry. Often used as a basis for upholstered furniture.

Calibrated board

  • Finishing material. Can be used to decorate arbors, veranda, interior and outer side.

Calibrated board

    • Device fences.

    Calibrated board

    Rate article
    ( No ratings yet )
    Share to friends
    Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
    Add a comment