All about tisch clamps

In a plumbing and carpentry case, it is impossible to do without a vice. This simple tool is an excellent helper when fixing parts. Visits are different. Special attention should be emphasized on tisch-clamps. What are the features, species, manufacturing materials, sizes and criteria of choice – this will be discussed below.

All about tisch clamps

All about tisch clamps

Peculiarities

Thish clamps – auxiliary tool that carries out fasteners during carpentry and plumbing works. The design of the vice consists of two elements: the frame and the clamping mechanism. The frame is carried out by the tool rigidity, and the clamping mechanism reliably fixes the part. The housing is equipped with fixing sponges, between which there is a billet. One sponge Fixed, Second – chassis. The movement of the chassis is carried out due to the rotation of the running screw with the handle.

Some products are aimed at working with wooden details. Sponges are equipped with special lining, which eliminates damage to the surface of wooden products.

All about tisch clamps

All about tisch clamps

There are models Thish clamps for working with metal. They have different clips and width of sponges. To fix more overall metal blanks, use a tool with great capture.

Some producers produce Clamps with protection from slipping blanks. Such a tool is used to work with large details. Special protective layer eliminates the change in the position of the part and its slipping.

All tools have their own characteristics and destination. With varieties of thish-clamps worth read more.

All about tisch clamps

All about tisch clamps

Review of species

There are the following varieties of clamps.

  • G-shaped. Clamp has a durable, wrought steel case. Vice allow you to fix up to several parts at the same time. Possess a small thread rate. It provides a good clamp, which is necessary when welding. G-shaped vice also used for works with wooden products. In this case, special lining for sponges apply to eliminate wood deformation.

All about tisch clamps

  • Facial. The end clamp has a design similar to the letter “C”. Alloy, forged vice are equipped with three screw clamps. The tool is used for joinery. The use of clamp causes some inconvenience. During operation, you will have to hold the design itself and tighten the screws.

All about tisch clamps

  • T-shaped. Distinctive feature of T-shaped devices – the guide profile in the form of the letter “T”. Its length can be more than 1 meter. On the profile there are fixing sponges. The fixation of the blanks is carried out due to the screw with the handle, which connects to the sponge.

All about tisch clamps

  • F-shaped. The body of the tool is less reliable and durable, but the vice is quite in demand due to the presence of the adjustment range. The design consists of a rail, on one side which is a sponge. It is fixed. On the other hand, the running sponge has a screw clamp with a washer. The length of the tool may be different. Some models have a deep capture, which allows several products at once.

All about tisch clamps

  • Corner. The tool is characterized by a design with protruding elements. When working is clearly respected by an angle of 90 degrees. The angular clamp has one clamping screw for fixing and holes, due to which the vice can be fixed on any surface.

All about tisch clamps

All about tisch clamps

  • Manual. Manual-type models similar to an ordinary clothespin. They are also called spring visits. This simple tool is used where there is no greater clamping effort.

All about tisch clamps

  • Quickness. Simple design has a fixed sponge bar. In the opposite part of the tool there is a running sponge with two handles. The mechanism with handles is called a trigger and more like a trigger. Therefore, the quick-pressure clamp is often called pistol. Product fixation is performed by clamping handles. The tool is considered universal.

If you deploy sponges in different directions, the clamp will turn into a strut.

All about tisch clamps

  • Pipe. The tool has a pipe with a fixed sponge. The second sponge – chassis. It is fixed with a special locking mechanism. Clamp is carried out using a screw with a handle. Vice applied in working with dimensional items.

All about tisch clamps

  • Swearing. The tool is used to process blanks at different angles. The design is firmly attached to any surface. The fixed sponge has a movable part that connects to the base through the guide screw. Screw is equipped with a handle. It allows you to rotate the clamp around the axis.

All about tisch clamps

Materials and sizes

Thish clamps have a clamping property, the strength of which depends not only on the structure of the structure. The reliability of the clip depends also on the material of the manufacture.

Thish produce from the following materials.

  1. Cast iron It is considered the most common material for vice. Cast iron products are massive and durable, can be served not one dozen years.
  2. Steel. Cheaper clamps produce low carbon steel. In the production of expensive products use high quality, durable steel.
  3. Aluminum / Duralumin. Materials have low strength, so they make small visks, the clamping power of which is not too large. They are used when repairing electronic devices or for jewelry works.
  4. Wood. Wooden clamps are used when working with a tree. Wood vice do not deform products. The whole design is made of wood, except the clip screw.

All about tisch clamps

All about tisch clamps

All about tisch clamps

All about tisch clamps

    Parameters of clamp are essential. Main settings – Sponge width and their move. Based on these parameters, determine the depth and width of the capture of blanks.

    Dimensions Clamps are different. Some models have sponges size from 50 mm. Maximum capture – 250 mm. Clamping force varies in the range of 15-55 f. Length Thish can reach 667 mm, height – 311 mm.

    Visits are considered Small, If their length is 290 mm, the height is 140 mm, the stroke of the sponges is 50 mm. Middle Things are sizes – 370 mm, 180 mm, 126 mm. Parameters Big clamps – 457 mm, 221 mm, 161 mm.

    All about tisch clamps

    All about tisch clamps

    How to choose?

    When choosing it is worth paying attention to the following nuances.

    1. Material. It is best to choose a cast-iron tool with sponges of steel.
    2. Size of fixing sponges. Before buying, you need to decide on the assignment of the instrument. The choice of sponges is based on the dimensions of the billets that will be processed.
    3. Method of fastening. For carpentry and fitter work, you should choose vice with a screw clamping mechanism. They are comfortable and when working do not require maximum efforts. There are models that allow you to adjust the fixation of the details with one hand. For more serious and frequent works, it is recommended to use stationary models that are attached to the workbench.
    4. Universality. When working with billets of different forms and materials, attention should be paid to universal clamps. As a rule, such vice are equipped with removable sponges.
    5. Tool size. Small and light tools are recommended to choose if the clamp is supposed to move.
    6. Quality. Important factor when choosing. It is necessary to pay attention to the surface of the vice, on the state of each part. The tool must be without defects, scratches, distortions. High-quality product has the right shape with clear straight lines. Threaded elements should be covered with lubrication. Movable mechanisms have a smooth move.
    7. Price depends on purpose. For professional purposes it is better to purchase a model for more expensive. In an infrequent use, inexpensive models will be suitable.

    All about tisch clamps

    All about tisch clamps

    All about tisch clamps

    Hand Clamps of Deep Capture Jonnesway are presented on the video further.

    Rate article
    ( No ratings yet )
    Share to friends
    Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
    Add a comment