All about glued board

Currently, glued board becomes increasingly popular. Such wood material can be made from various wood species. It is made according to special technology. Today we will talk about what the main characteristics have such boards and how they are doing.

All about glued board

Characteristic

The gluedboard has a type of material consisting of glued with each other wood surfaces, sometimes bars, so it is called. Such a dry sawn timber is an environmentally friendly product, it is easily denominated even manual processing, distinguished by special durability and durability.

Such lumber possess good fire resistance. They relate to difficult to combine materials.

All about glued board

Similar wood bases, as a rule, under production are processed by antiseptics and other protective solutions, allowing to significantly extend their service life.

In addition, this type of boards has a relative low cost, so it will afford almost any customer. But it should be remembered that such lumber in the process of long-term operation can crack, a little deform. These basics have some natural defects that reduce their durability and durability.

All about glued board

Manufacturing technology

The production of glued material occurs in several stages. First, selected whole boards are cut into separate parts, then the initial processing of blanks is carried out. Prepared boards are allowed to small elements. After that, wood is sent to the chamber for drying.

All about glued board

All about glued board

As a result of its processing, the level of humidity of the material should not be higher than 10-13%.

Dried billets take place once again. Selected bars are trimmed, all irregularities, other defects are neatly removed from the surface of the tree. Later, the material is subject to careful machining, which allows you to adjust the geometry of products.

All about glued board

At the final stage of manufacture, the processed billets are spliced ​​among themselves by width. As a result, smooth and neat lumber, ready to use.

All about glued board

All about glued board

Glued boards go to warehouses. There the construction glue mixture finally hardens, the materials become the most durable and persistent. Before the sale of structures should be subjected to finishing using special antiseptic agents and some other protective impregnations for wood.

All about glued board

Dimensions and types of wood

Similar structures can be different types. Separately, you can allocate the following varieties.

  • Materials made of pine and fir. Such options are considered the most affordable, they perfectly carry a high level of humidity, temperature differences.

All about glued board

In addition, such rocks are distinguished by special resininess, which prevents damage to the wood insects.

  • Larch products. These sawn timber are the most durable.

They boast of excellent resistance to adverse water action.

All about glued board

Structures created from larch, almost do not spoil insects. But at the same time, the cost of these structures will be much higher compared to the rest of glued materials.

  • Designs from cedar.Cedar bases have an attractive exterior design, an unusual and neat natural pattern. Such boards are often used in the process of various finishing works.

All about glued board

This breed of wood has important bactericidal properties.

  • Boards from Duba. Oak materials have special strength and resistance. They have a porous and beautiful structure, pleasant yellow or yellow-brown color. Like the previous option, oak boards are also often used for decoration. Cedar wood is rather solid, dense and relatively heavy.

All about glued board

Oak resistant to the formation of mold and fungus, the appearance of harmful insects.

Durable sawn timber are made from this tree.

Glued handheld boards are produced with different sizes. Samples are considered standard with values ​​in 50×200, 50x150x6000, 50×300, 200×50, 50×150 cm. Thickness can also vary, most often there are products from 25 to 50 mm, sold and more subtle varieties with a thickness of 10 mm.

All about glued board

What glued array to choose?

Before buying such wood structures, it is worth paying attention to some essential nuances of choice.

So, you need to pay attention to the type of gluing.

All about glued board

Popular options are considered:

  • Compound “On Microcamp. In this case, the process of fitting will be the most simple as possible, as the slot will eventually be hidden. But with insufficient pressing press, the seam can turn out too thick and strongly noticeable.

All about glued board

  • The junction model with the junction “on the smooth”. In this case, in the manufacture, the most thin, barely noticeable seam between the layers will be formed. But this gluing technology requires more thorough processing and fitting lamellae.

All about glued board

  • Connection to Sandwich Panel. This compound is considered the most economical option because it makes it possible to produce ready-made material almost without waste. But at the same time, the external registration of such sawn timber will spoil ends.

All about glued board

  • Double gluing thicker and width of the product. Such a connection is used in the production where the thirty millionth mark is taken. Such blanks dry more quickly. When proper fit, as a result, the maximum durable array is obtained.

All about glued board

When choosing a glued board, you must pay attention to the texture of the tree, from which they are made.

Remember that the lamellas should not include the core.

Different options may have all sorts of types of dusting lamellae.

Models with docking “Furniture Shield” are special blanks of small length. In the process of their creation, all the bilks and other irregularities are sure to be removed.

All about glued board

Also distinguish the furniture shield, which will be trimmed by solid slats. In this case, the product is the same product as in the first version, but it will additionally attached to boards on both sides, the thickness of which ranges from 5 to 8 millimeters.

In some cases, a set of lamellaes arbitrary or the same width is used. In this case, wood blanks of the desired dimensions are selected, there should be even small bitch, scratches and cores on their surface. At the same time, the larger the length of such products, the harder it will be to choose the appropriate material, in addition, the cost of such structures will be much higher.

All about glued board

Before purchase, carefully view the surface of the material. Models made from poor-quality wood will not be able to last last, soon the design will begin to deform and collapse.

Also when choosing, make sure all layers are made of well-dried wood. Otherwise, the product will not be durable and quite reliable.

All about glued board

Do not forget that during the operation of the lamellas will change their parameters. When the tree is connected, it is given only a new form, even the array treated with a protective varnish will change its characteristics. Correctly glued design can easily transfer all changes, but the dimensions can still vary (mostly across wood fibers).

All about glued board

Scope of application

Such types of wooden boards are often used in the manufacture of different furniture designs, including table tops, shelves, racks, cabinets, chest of drawers, kitchen furniture.

All about glued board

In addition, such material was widely used in construction. It can be used in the formation of wall coatings, partitions, ceiling panels, window sills.

All about glued board

In any case, it should be remembered that such wooden materials are not recommended to expose to sharp differences in temperature and humidity, because it can lead to loss of strata strength between layers.

All about glued board

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment