All about docking profiles

Docking profiles – aluminum and flexible for floors, liquid for linoleum and LDSP – allow you to harmoniously arrange the transition between materials when installing floor coatings.They are produced in various design options, shades, do not require special efforts when attaching. When planning the use of different materials in the structure and texture in the floor finish, it is worth thoroughly consider which profiles will be used when they dock in the interior.

All about docking profiles

All about docking profiles

Description and appointment

Docking profiles – Special planks used when installing floor coatings for sealing and insulation of seams between materials. With the growing popularity of the combined design projects, it was necessary to solve problems that were previously simply not relevant. For example, For the connection of laminate and tiles, other panels, parquet and porcelain stoneware at the borders of the premises use special elements that replace familiar thresholds. In addition, profiles are needed for linoleum – where 2 of the material is connected, it is almost impossible to bore them without the formation of the gap.

All about docking profiles

The main difficulties in the installation of coatings of different thicknesses are as follows.

  1. Missing height. To dock the floor tiles with a parquet or parquet board, laminate has to adjust the drop in 2-5 mm, which occurs due to the features of laying coatings.
  2. Displacement elements. For panels or for drywall, fastening is not rigid, it is the norm. Laminate is also capable of moving vertically relative to the substrate.

Compound of coating with different ways of fastening (with rigid fixation and mobile) requires the use of special connecting planks. They are produced separately for linoleum, LDSP, DVP, chipboard, other materials.

Depending on the purpose, the depth of the disguised gaps, the appropriate profile option is selected.

Docking profiles play not only a decorative role. They have quite obvious functional purpose. This product category is available in several design variants.

  1. Classic straightforward. Such profiles are maintained by significant operational and mechanical loads. Stacked only in the same plane. Most often hard metal strips are used.
  2. Aligning. These profiles have a design of a corner with lying in different planes. The optimal option is selected based on the height difference. Self-stacks are attached, sometimes additionally apply elastic gaskets.
  3. Connecting-decorative. Such profiles are more like rages. They are the widest, have an outer decorative coating, provide simultaneous docking of different sections of the floor and eliminate not too aesthetic seam.
  4. Finishing or finishing. They are mounted along the wall where you need to overlap a small gap. Such profiles are well replaced by plinths, can have a plastic or metallic basis.

All about docking profiles

All about docking profiles

All about docking profiles

All about docking profiles

When selecting suitable connecting planks, it is necessary to take into account their appointment, features of application. Some decorative options require a professional approach to mounting.

The easiest most attached plastic profiles.

Varieties

There are several types of profiles used when connecting heterogeneous materials. Metal Docking material, most often aluminum, can have a width of 10 mm, 16 mm, 25 mm. It is not subject to corrosion, has a low weight, differs in a long service life. Where metal profiles are not used, go Plastic Options – based on PVC, other polymers with sufficient indicators of strength and elasticity. All existing varieties of docking slats for sex should be considered in more detail.

All about docking profiles

All about docking profiles

Liquid

Popular solution designed to connect linoleum beans, as well as tiles and laminates. The structure of liquid profiles is an adhesive basis mixed with fine particles of cork tree. Apply such mixtures after laying coatings, filling them with lumens formed between different types of surfaces. After pouring the excess glue, the remaining on the surface, they are simply cut off by a sharp blade of a knife.

A distinctive feature of liquid profiles can be called the possibility of their use for curvilinear compounds.

All about docking profiles

Such such seal sealants are supplied in packs of 0.5 liters. The process of hardening the mixture lasts from 6 to 12 hours. In the gap it is made using a glue gun.

Flexible

PVC-based or rubber profiles of this type are used when connecting coatings with uneven boundaries. This is the optimal option for the curvilinear docking of laminate, tile coatings. Profile is not afraid of operation in high humidity, it easily takes the desired bend angle. Standard sizes of such elements – 36 mm wide and 4 mm in height, the surface has a semicircular shape.

All about docking profiles

All about docking profiles

Installation of flexible profiles is carried out in the process of laying coatings. It is fixed in a special retaliatory bar, providing a dense fixation without displacements. Such a solution is well suited for coatings sensitive to the formation of scratches.

Hard

These are classic profiles for overlapping straight joints. Such connecting sheets are produced from durable and solid materials – wood, metal, PVC. Strict profiles are used where needed increased strength, stub resistance to abrasion, mechanical or shock loads. They are less pronounced with temperature drops, which allows you to finish commercial or unheated premises.

Also, the distinctive features of such profiles include:

  • Mounting versatility;
  • minimum requirements for coating stiffness;
  • long service life;
  • attractive appearance;
  • Wide size range.

All about docking profiles

All about docking profiles

Aluminum docking structures are fixed to the floor surface Self-timers. Plastic and wooden options most often just Insert In the joint, providing full seam sealing.

In some cases, such strips are used as thresholds on the borders of the premises. In this case, the installation is carried out both in the floor and with elevation above it. The most budget solution in this case becomes a metal profile.

All about docking profiles

In its cross section and appearance, such docking plates may be as follows.

  1. Brass T-shaped. Products are characterized by an attractive appearance, they are flexible enough to be used to form joints with different geometry. Brass is resistant to corrosion, it may require periodic cleaning, with time darkens.
  2. Brass chrome t-shaped. Products fit well in the aesthetics of High-tech style, combined with tile and laminate combinations. Such profiles are used only with straight mounted.
  3. Brass actions. Made specifically for parquet and stone flooring. Look more respectable. For the composition of the surface, the metal is subjected to annealing.
  4. Polished brass. Golden glitter profiles. This is a designer solution for pompous interiors. In such a framed, marble and tiled floors look good.
  5. Aluminum matte. Universal Option, optimally suitable for use with linoleum or laminate. Aluminum may darken, afraid of scratches. Such decorative strips are usually the most narrow, about 1 cm wide.
  6. PVC. Polymer profiles of T-shaped section are quite popular, produced in a monophonic design or with wood imitation, easily selected under the decor of the floor covering.

All about docking profiles

All about docking profiles

All about docking profiles

In addition to plastic and metal profiles, cork hard compensators are also available. They are produced in the form of planks with a length of 0.9-3 m, thickness of 15-22 mm, the width is determined by the size of the gap. Material can be painted alone in any colors, fix the tone with polyurethane varnish. Cork compensators manifest themselves well in operation between ceramic tiles and laminate.

All about docking profiles

All about docking profiles

All about docking profiles

Mounting

Most often, when installing different in the height of flooring, T-shaped profiles are used, the response plate for which (mortgage part) is installed under the joint, on the substrate. Most often, such a solution is applied on the border of the premises. Correct outdoor coverage with each other will be easier if you follow the detailed instructions.

  1. Upon completion of laying part of the coating with rigid adhesive fixation to attach to the substrate a plastic mortgage part. The width of the response is chosen based on the size of the gap. Mortgage can be laid in one section or share on blocks.
  2. Lay a coating with a movable basis. Measure the length of the resulting gap.
  3. Crop profile under the specified size. It is better to use a mobile circular saw.
  4. Tracing the docking bar, if necessary, be adjusted under the features of the joint, cutting one of the edges.
  5. Remove from mortgage parts plastic tape plug. She needs the entrance groove not clogged at the installation stage.
  6. Insert the docking profile to the mortgage part at an angle of about 20 degrees, slightly squeeze, put on the place intended for it. Make sure that the element has fully entered the mount. Walk in Cyans all over its surface, pre-laying felt or soft textiles.

All about docking profiles

All about docking profiles

All about docking profiles

When using plastic profiles, it is important to remember that such elements are not designed for reusable. Any montage errors will lead to the fact that the mortgage part and the bar itself will have to change. When using a flexible profile, the response part is fixed after laying coatings, without forming drops of heights. Remove the protrusion, removing the substrate, just cutting it.

When choosing a docking plank, it is important to pay attention to its limit level of bending.

How to set a docking profile, look next.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment