13 best staplers

Staplers are indispensable in furniture production and construction. They are used to attach fabric upholstery, film, tarpaulin, chipboard and other thin materials. Amateur models are useful in the country cottage and in the private household for building a greenhouse, installing a fence, creating a temporary shelter. Staplers can be manual mechanical, electric and cordless. We have reviewed dozens of models of each type and ranked the best staplers, dividing them into their respective categories. In preparing the TOP 13 we took into account the reviews of models and features of products. Pay attention to the advantages and disadvantages of the tool, as well as what they are praised for in reviews – this will help orientate in the available variety and choose the best product for yourself.

Best staplers

The best mechanical staplers

With mechanical staplers, the operating mechanism is actuated by the user’s hand pressure. Inside the housing, the actuating mechanism contains a spring (spiral or spring-loaded) that strikes the striker. The last one collides with the staple and clogs the fastener. This is a relatively inexpensive tool, but it is suitable for domestic needs or semi-professional activity, because you will constantly have to squeeze the lever. Here’s a ranking of the seven best examples of this type.

Rapid R153 WORK

NE RUS 5000061

Rating: 4.9

The third place in the rating is taken by the product of the German manufacturer. The stapler is designed for covering furniture or securing insulation material. Staple type 53/A. Key feature is the hammering force regulator on the back end. By turning the wheel you can set the degree of spring tension. This allows you to set the depth of the fastener from 4 to 14 mm. The body of the tool is full-metal, so nothing moves in the hand but the lever when holding the tool. Handle stopper to prevent accidental actuation. Soft padding does not chafe your fingers when pressing. Magazine spring pushes the tool reliably against the spout and prevents misfires. There is a small tab on the back for removing poorly hammered fasteners.

Our experts have rated the product because the stapler hits well despite its small size. Its dimensions are 28x108x220 mm and fit easily into a pocket. impact force enables fasteners of up to 1″ high to be driven in.4 cm. Users report in reviews that after 2000 shots, the impact force does not weaken.

Advantages

• safety hinge;
• Infinitely adjustable impact force;
• staple range 4-14 mm;
• all-metal case;
• Soft padding on the handle.

Disadvantages

• Only works with thin staples 0.7 mm;
• there is no individual number on the body to register on the website;
• It can be used only for household purposes (otherwise the paddles wear out).

COBALT 240-683

Rating: 4.6

The fourth stapler in our rating is from a Russian brand assembled in India. This is a quality professional tool, designed for 53/A staples. Can also handle type 500 studs and 47F nails. That is why it is called the “3 in 1” in the construction environment. On the bottom there is a pull-out magazine that can hold up to 150 staples, which provides for greater productivity. The creators realized a spring loaded impact mechanism that reduces the impact force on the hands. To adjust the desired hammering force, there is a wheel on the side. Steel housing is sturdy and withstands drops well. Lever is secured in the folded position with an additional ring to prevent accidental operation.

In our opinion, the stapler is worthy of the rating because of the soft grip on the take-up handle. Unlike other models, the lever is covered with a thick plastic shell and a rubber insert. This makes it voluminous and more comfortable to push regularly. When striking, the recoil is less felt in the hand. This design also helps to hold the tool more securely when working at heights.

Advantages

• The magazine can hold 150 pieces;
• The stapler has an adjustable impact force;
• fastener sizes 6-14 mm;
• Spring-loaded spring for precise strokes and little recoil;
• Can even handle Dexster 16 nails.

Disadvantages

• high value;
• weighs 800 g;
• No window to monitor tooling quantities;
• the spout is not elongated.

GROSS 41002

Rating: 4.5

Another German stapler from Gross was included in the top five rankings. It is an aluminum model designed for a wide range of fasteners: 53/A/13/19/H/37/59. The staple height can be from 6 to 16 mm. The tool is allowed to have nails for mounting denser chipboard sheets. Made of aluminum and padded in the grip area. Shot force adjustment is located under the lever, so it does not interfere during repetitive manipulation. Customer reviews praise the model for the staple flow indicator. The viewing window shows when the supply of consumables is low and helps you replenish it in time. The magazine loading from below speeds up the replacement process and increases productivity.

The product is added to the best rating because of the extended spout. It leaves a small gap between the body and the work surface, so the craftsman can see exactly where to place the machine. This increases productivity and facilitates better placement of fasteners for decorative purposes.

Advantages

• aluminum housing;
• Wide range of suitable accessories;
• Adjustment of hammering force;
• protruding spout;
• handle locking mechanism.

Disadvantages

• high cost;
• wide housing 45 mm;
• sometimes fires in pairs;
• The plastic casing gradually wears out and creates play.

Central tool 1609

Rating: 4.4

The sixth in the ranking is a product of the domestic manufacturer “Tsentroinstrument. The stapler has a spring mechanism of impact on staples that does not bend legs, unlike spiral devices. Under the main lever, there is a shot force switch that has two positions, soft and hard. This makes it possible to drive the fasteners into both pine and ash. The body is distinguished by enhanced strength and durability. Replenishment is simple through the end hatch. Weighs 560g, which also surpasses most of the rating participants in this category. Height of U-shaped fasteners allowed from 4 to 14 mm. Handle locks into place for convenient storage.

The stapler was added to the rating as the best in terms of price/quality ratio. Unlike other members of the top list it is two or three times cheaper. Yet it is made entirely of metal and has soft inserts. The driving force can be adjusted and the remaining amount of fasteners in the magazine can be seen through the inspection window. In the reviews the owners share that during the work of hammering 1000 staples, not a single misfire occurred.

Advantages

• metal housing;
• Many rubber pads;
• fits comfortably in your hand;
• leftover indicator in the magazine;
• spring mechanism.

Disadvantages

• It requires a lot of force to be pressed;
• Only two positions for adjusting the force of the shot;
• No spatula for prying the “back” of the fastener.

Inforce 06-09-42

Rating: 4.3

Rounding out this category is another domestic model. The stapler is designed for 53/A fasteners and will be able to drive them in to a depth of 4-14 mm. The magazine is inserted from the front, which is easy and convenient. Finger grip is covered by a thin rubber pad. Main arm is made of steel and brushed. For carrying the tool in the pocket, there is a loop that locks the drive. Customers in the reviews like the smooth adjustment of the impact force, which helps to select the desired degree of impact on the staple, depending on the density of the material. More expensive models have only modes without intermediate values. The impact spring here is quite powerful and confidently drives U-shaped elements through films, roofing felt or fabrics. But be prepared for a kick in the hand when using it.

This is the best mechanical stapler for domestic needs for the price. The product is suitable for self-repair of chairs, sofa, or stretching film on a seasonal greenhouse. Included with the model comes 400 staples, which is enough for the first time.

Advantages

• for staples 4-14 mm;
• End-shot force adjustment;
• powerful impact force;
• Does not crush the rubber when clamped to the wood;
• attractive price.

Disadvantages

• no replacement indicator;
• No extended spout;
• only for thin consumables 0.7 mm;
• The safety hinge often crawls under the lever and blocks it;
• Will not be able to hammer into the chipboard through the fiberboard.

Best cordless staplers

Cordless staplers are powered by a battery transmitted to an electric motor. the latter acts on the impact mechanism. This does not require constant effort from the operator and contributes to increased operating time. Here are a few best models in this rating category that have good reviews and characteristics.

BOSCH PTK 3,6

0.603.968.120

Rating: 4.9

Second place goes to the stapler from the American manufacturer Milwaukee. The product is equipped with a battery operated brush motor attached to the handle. But no battery is included. The stapler differs from the previous product in the ranking in that it has a metal clip that allows you to attach the tool to your belt to easily climb to a height or perform other processes, freeing up your hands. The handle of the machine is comfortable and covered with anti-slip pads. The impact force control is located in the thumb reach. + and – indicators help you know which way to turn the wheel. The nose protrudes forward and it is easy for the craftsman to position the stapler precisely where you want it. Four diodes on the side of the housing indicate the remaining charge. The magazine has four notches through which the supply of consumables is clearly visible.

Our experts put the stapler in the ranking because of its enhanced performance. In one minute, it can fire up to 140 shots. It helps to quickly perform processes of fixing soft materials, where you do not need a high accuracy of fixing points.

Advantages

• rubberized handle;
• convenient adjustment of the shot force;
• roomy magazine;
• belt clip for carrying on your belt;
• Protruding tip for precise positioning.

Disadvantages

• high value;
• very bulky housing;
• the battery will have to be purchased separately;
• weighs 1.6 kg.

Top of the range staplers

Network staplers are powered by an electric motor, but receive power directly from a single-phase network 220 V. This contributes to a more compact body and reduces weight compared to battery-powered products, but limits maneuverability. Operator will need an extension cord to work on the ceiling or along a long wall. Here is the rating of the best devices from this category.

BOSCH PTK 14 EDT 0.603.265.520

Rating: 4.9

We give first place in the rating in the category of the stapling pliers to Bosch PTK 14 EDT. D-case design with rubber mounts on handle and engine compartment. Power control is on the bottom in the form of a large wheel. The electronic control unit precisely determines the impact value, so that nails can be driven gently into soft materials and driven confidently into hard types of wood. Weight of the device is 1.1 kg and performs up to 30 blows per minute. Staple sizes are available from 6 to 14 mm. Masters reviews praise the stapler for its quiet operation and powerful strokes. This is a professional tool for comfortable operation. Nail compatibility is another plus point of this model.

We rated the product because of its double shock function (DuoTac). Mode selection is on top of body where intuitive rocker switch is located. In this mode, the unit drives two staples in one place at once, which increases the tensile strength. It comes in handy for fixing roofing materials and sheeting in places with high wind loads.

Advantages

• 1,000 staples as a gift;
• Soft grip padding on the handle;
• Controlled impact performance with spout stop;
• Stock indicator in the magazine;
• Stepless power adjustment.

Disadvantages

• 1 short wire.5 m;
• High cost;
• bulky housing;
• Soft base metal.

ZUBR ZSP-2000

Rating: 4.8

The second place of the rating belongs to a domestic product from the company “Zubr”. The stapler is optimally weighted due to the location of the motor behind the handle. The magazine is easy to fill and holds up to 50 cells. Power of the tool is 2000 watts, which allows up to 20 strokes per minute. Electronic power regulator is placed on the end of handle. Users in the reviews like that the model has a separate switch that completely de-energizes the unit. It does not require you to unplug the plug from the socket for brief interruptions when the tool is left unattended. Perforations on the body to keep the motor cool. The device interacts with both nails and U-shaped tooling.

We marked this model in the rating as the most suitable for fixing thick materials (insulation, plywood, roofing felt, etc.).). The stapler magazine has expanded parameters that allow filling staples with a stem height of 15-25 mm, and nails 15-30 mm. The construction site helper for the HPE2000C PREMIUM.

Advantages

• electronically adjustable impact force;
• 2000 W power;
• Suitable for all types of fasteners;
• a firm grip thanks to the rubber overlay;
• The striker is made of hardened steel.

Disadvantages

• unit weighs 1.6 kg;
• The magazine only holds 50 staples;
• Low frequency of blows – 20 per minute;
• pins occasionally stick in the working part.

Hammer HPE2000C PREMIUM

Rating: 4.7

The third place is given to a similar design model from the American manufacturer, but the characteristics are slightly different. With a 2000 watt motor of the same capacity, the stapler generates up to 30 strokes per minute. Staple size 55 allows the tooling height up to 25 mm for U-shaped elements and 32 mm for dowels. During operation, the device emits a noise of 91 dB. Adjustment wheel for hammering force is on the end of the handle. There’s also a common toggle switch that cuts power to the tool. The manufacturer puts both types of consumables in the kit. A single rubber grip extends from the beginning of the handle to the end of the motor unit to ensure a secure hold. Highly textured trigger with anti-slip grip.

We ranked the stapler as one of the best because of its narrow spout. Beveled shape near the end, giving good visibility to the operator. Despite the large size of the entire body, the tool can be precisely positioned at the desired fixing point. Still stapler is capable to drive nails with length of 32 mm – all models from our rating described above are not able to do it.

Advantages

• 30 shots per minute;
• Protective pressure actuation mechanism;
• Separate voltage switch on the handle
• electronic adjustment of power;
• staples and nails for free.

Disadvantages

• A short mains cord;
• weighs 1.8 kg;
• 50-unit magazine;
• No double shock function.

Kolner KES 650

Rating: 4.6

Completes this category ranking model from little-known German manufacturer Kolner. The product is assembled in a factory in China. The machine has a power of 650 W and produces a constant force with no possibility of adjustment. Owners say in reviews that the stapler fits well in the hand. The long window gives an excellent view of the remaining tooling. All body protrusions are covered in rubber, including the outside of the handle. The wide trigger is easy to pull with several fingers at the same time. To make the shot, you must first press the small round button on the side, and then the start button. This will not let the machine shoot at an accidental press. Tool change is done at the bottom, by pulling out the magazine. To release it, all you have to do is push the latch.

In our opinion, the stapler has earned a place in the rating because of the most affordable price in the category – it is difficult to find cheaper. It also weighs 600 g, which is a rarity for network models. But when buying this variant, you should be clearly aware that it is only suitable for short-term tasks.

Advantages

• works with staples and pins;
• The small dimensions are 22x6x16 cm;
• Protection against unintentional activation;
• attractive price;
• Can drive T- or I-shaped nails.

Disadvantages

• the power is not adjustable;
• no double hit;
• Magazine capacity of 50 units;
• Short mains cord 2 m
• soft plastic base.