10 best construction mixers

Construction mixer has completely displaced the usual drills in those cases where you want to prepare plaster or cement-sand mortar. This device allows you to quickly and efficiently mix dry mixes with water, mix glue or paint material. Today, mixers have become more affordable, so you can meet the tool not only in the hands of professionals, but also at home masters. In order to choose the optimal model in terms of technical parameters, you should listen to the advice of our experts.

How to choose a construction mixer

1. Power. One of the most important parameters of the construction mixer experts consider the engine power. This parameter should be chosen according to the amount of work to be done.
2. For professionals, the following will doModels with a capacity of 1200-1800 W, they do not overheat when stirring large amounts of solution.
3. For householdthe tool, equipped with electric motor 500-1000 W will suffice for the purposes.
4. Turning speed(RPM). Even with the same motor power, mixers can differ in spindle speed at idle speed. Models with lower speed (500-650 rpm) are suitable for mixing thick and viscous substances. And to obtain a homogeneous mass it is better to use high-speed mixers (700-900 rpm). Professionals choose two-speed devices that allow you to set the rotation speed depending on the type of construction mixture.
5. Turning speed adjustment. Many builders start the mixing process by gradually adding the dry material to the water and then slowly mixing it. As the density increases, the speed has to be increased. The best machines for this task are those with electronic speed control.
6. Torque.Very thick and viscous solutions put considerable strain on the mixer motor and gearbox. You therefore need to consider the rotational power or torque. The higher it is, the more viscous compositions the tool can work with without overheating. 50-60 Nm is most often sufficient for the preparation of most mortars. For the thickest compositions, it is better to give preference to devices with a torque of 70-85 Nm.
7. Number of spindles. Mainly mixers with one spindle are on sale. They are simple and reliable, only the rotation of the tool shifts the direction of rotation of the whisk. Models with two spindles have the nozzles rotating in the opposite direction. Therefore, such mixers are more convenient for intensive work.

We have selected the 10 best construction mixers in this review. All of them are sold in the Russian retail network. Opinion of experts and feedback from local builders were taken into account when assigning the place in the rating.

Rating of the best construction mixers

OSCH GRW 18-2 E

Rating: 4.9

Many professional builders warmly remember the old mixer BOSCH GRW 11 E Professional. On its basis, the German manufacturer has developed a new model BOSCH GRW 18-2 E. Instead of a one-handed design, the designers offered a tool with two handles. The device provides for the use of a single whisk, but thanks to the high power (1.8 kW), the device quickly and efficiently mixes dry mixes with water in any proportion. The mixer has an electronic speed control, which adds convenience in operation. Experts gave the model the laurels of the winner of our rating.

Professional builders are pleased with the high torque, high-quality construction and durability of the device. The only disadvantages are the high price.

Advantages

• high power
• electronic speed control;
• quality assembly;
• high reliability and durability.

Disadvantages

• high price.

Metabo RWEV 1200-2 1200 W

Rating: 4.8

German mixer is endowed with a power of 1200 watts and a two-stage gear reducer. This resulted in an increase in weight of up to 4.3 kg, but provided more stable stirring at different speeds. Two wide handles with rubber inlays are comfortable for holding the construction tool. There is a button to lock the start button, in case of long kneading. You can control the speed steplessly by pushing the button. Except for the preparation of construction mixtures, the mixer is also suitable for drilling metal and wood. In this case it is installed in a special mount and serves as a stationary machine with a lowering base. The maximum idle speed reaches 720 per minute, so it will be able to drill a thick channel.

In reviews, builders note the rapid speed of mixing and the quality of the mixture. Many people like the presence of a second speed, which was not present in the previous model RWEV 1200, making it easier to switch between cooking mortar for masonry and plaster. But because of the cost of such a machine makes sense to buy only for professional activities, otherwise it will never pay off.

Advantages

• gearbox in a metal case;
• low weight 4.3 kg;
• rubberized handles;
• Quickly switching speeds for mixing mortars of different densities;
• Can be mounted on a stand for use as a drilling machine.

Disadvantages

• high cost.

DeWALT D21510

Rating: 4.7

DeWALT D21510 is the choice for builders who appreciate mobility. This lightweight (3.0 kg) and compact model yields to the leaders of our rating in power (710 W). Manufacturer has provided only one spindle speed. By the way, its frequency is 550 rpm. Experts praised the high torque of the machine (50 Nm). The model falls on the third line for convenience in operation. Mixer drill is equipped with M14 chuck in which you can install a whisk up to 160mm in diameter.

Owners of the DeWALT D21510 mixer are satisfied with the mixing quality of loose and liquid building materials. The handle on the back is beyond praise. The disadvantages include low power and single-speed mode.

Advantages

• comfortable handles;
• metal gearbox and gears;
• low weight;
• M14 chuck.

Drawbacks

• modest power;
• One rotation speed.

Makita UT1401

Rating: 4.7

Not a bad set of options has a construction mixer Makita UT1401. The device has electronic adjustment of rotation speed, power button lock, two-speed mode of operation. Powerful electric motor (1,4 kW) can spin the spindle of the tool up to 730 rpm. The experts have included this model because of the great interest among the visitors of Yam. In only two months, the product card has been viewed by about 3140 people. With a cable length of 3 m, the craftsman will not be inconvenienced by an extension cord. The unit weight is 5,5 kg.

In reviews, domestic builders praise the tool for decent quality, convenience in operation and unpretentiousness. The disadvantages include the controversial design of the handle (rectangular adjustable), which is not to everyone’s liking.

Advantages

• good power;
• Two speeds of rotation;
• soft start;
• long cable.

Disadvantages

• uncomfortable handle.

RedVerg RD-Mix150/2DM 1500 W

Rating: 4.6

The mixer is endowed with the power of an electric motor 1.5 kW and a two-speed gearbox for a fast setting of 600 or 800 rpm. Finer adjustments are made by pushing the starter button deeper. Two handles of the construction tool are covered with anti-slip inserts. Gearbox is surrounded by a metal housing with elongated struts, which increases the heat dissipation area and allows you to rotate the motor for a long time without stopping. The latter is endowed with double insulation to prevent short circuits, in case the winding gets too hot. But the machine weighs 8 kg, which is important to consider when choosing – often lift it or carry it around the place is not very convenient.

The construction mixer stands out with its high power of 1500 watts and two mixer bars with whisk attachments. In fact, it almost doubles the mixing speed, improving the homogeneity of the resulting mixture. It is worth noting that the product is much more affordable than similar models with similar characteristics, and often surpasses them.

Advantages

• Quick change of speed by means of a step change;
• comfortable handles with rubber inserts;
• two whisk attachments;
• quick heat dissipation from the gearbox.

Disadvantages

• no significant.

Interskol KM-60/1000E

Rating: 4.5

Domestic development of the Interskol KM-60/1000E has attracted the attention of experts for several reasons. The manufacturer offers a fairly powerful device (1.05 kW) for a reasonable price. The motor spins the spindle to 850 rpm, and the model has a two-speed mode of operation. Aluminum gearbox housing is responsible for reliability and durability. You can choose the optimal mixing mode with the help of electronic speed control. The tool stands out from the competition due to its special shape and location of handles. For convenience there is a trigger lock.

The mixer gets into our rating for the positive feedback from users. They are pleased with the power, the lightness (4.3 kg), the effective cooling. The disadvantages are the weak housing, inconvenient fixation of the nozzle in the chuck.

Advantages

• affordable price;
• reliability;
• electronic speed control;
• compactness .

Disadvantages

• weak housing;
• Uncomfortable fixation of the whisk.

STANLEY SDR1400

Rating: 4.4

American designers managed to develop the lightest construction mixer. The STANLEY SDR1400 weighs only 3.5kg, but has an enviable power (1.4kW) and high torque (80Nm). The tool spindle rotates at a speed of 800 rpm, the developer has provided a two-speed mode of operation. Of the options, experts noted the ability to work in a drill stand, electronic speed control, locking the power button. The model is deservedly included in our rating.

Construction workers on thematic forums praise the American-Chinese mixer for its power, smooth start-up, high torque and lightness. The disadvantages are the high noise level and the short cable (2.5 m).

Advantages

• lightness and compactness;
• high torque;
• M14 chuck;
• the ability to use as a drill.

Disadvantages

• noisiness;
• short mains cord.

E

TECH MS 1600/2ED

Rating: 4.3

Domestic development ZUBR ZMR-1200E-1 has many advantages. While users are attracted by the affordable price, experts focus on the performance. Maximum mortar volume reaches 120 liters. The manufacturer has installed a powerful electric motor (1.2 kW), metal two-speed gearbox (620 and 810 rpm). Thanks to the efficient heat dissipation, the tool does not get hot during long-term work. There is a mixer and such useful options, such as an electronic speed regulator, button lock, soft start. The model hits the top 10 of our rating.

Domestic builders often use the ZUBR ZMR-1200E-1 mixer on the construction sites. They praise it for its reliability, compactness and reasonable price. Only the short cable (2 m) spoils the overall impression of the model.

Advantages

• affordable price;
• Two-speed gearbox;
• soft start;
• good performance.

Disadvantages

• short cable.

Philent MD1-11E

Rating: 4.1

Russian mixer Fiolent MD1-11E is equipped with an electric motor 1.1 kW, which provides a maximum torque of 85 Nm. The model can be used as a drill, but it does not come with a chuck for drills. The manufacturer used plastic for the housing, and the gearbox is made of aluminum alloy. The original shape has a handle-bracket, it becomes a support for the mixer when the operator needs to put it on the ground. Electronic speed regulator has been implemented in the start button. The trigger can be locked in any position. The maximum speed is limited to a number 600, there is only one speed mode.

Tenth place in the ranking is due to such disadvantages of the mixer as inconvenient speed control and self-tightening of the nozzle.

Advantages

• low price;
• multifunctionality;
• The original handle;
• high torque.

Disadvantages

• One speed;
• difficult to unscrew the nozzle.