Laying of paving slabs on a dry mixture

Know how to lay a paving slabs on a dry mix – a very important moment for any householders. It is necessary to pay attention to the proportions of the mixture for strokes and the thickness of the laidden. Talking how to put a tile with your own hands, you can not get around the topic and such a topic as the total consumption of cement-sand mixture.

Laying of paving slabs on a dry mixture

Laying of paving slabs on a dry mixture

Peculiarities

The layout of the paving slabs on the dry mixture is quite practical and convenient. This material:

  • durable;
  • serves long;
  • Not bad tolerate even strong moisturizing;
  • Not particularly susceptible to fluctuations in temperature;
  • does not produce substances harmful to humans, animals and plants;
  • presented in a wide decorative texture and palette.

Laying of paving slabs on a dry mixture

Laying of paving slabs on a dry mixture

The dry mixture can be putting vibration-liting and vibration and pressed tiles. The second option is characterized by a greater mechanical fortress. But only granite natural tiles can boast the greatest strength.

For stacked products typical:

  • wavy;
  • wedge-shaped;
  • rhombic;
  • rectangular;
  • square;
  • 6 coal configuration.

Laying of paving slabs on a dry mixture

Laying of paving slabs on a dry mixture

Laying of paving slabs on a dry mixture

Selecting the mix

Experts note that one of the best options is a typical dry mix of industrial manufacture. In it, all the basic components are perfectly balanced by quantity. The quality of individuals and composition is generally vigilantly watched the laboratory. Since manufacturers care about reputation and compliance with standards, they are forced to follow strict environmental restrictions. It is only necessary to carefully study the reviews and require the presentation of international class certificates.

The optimal mixtures are made based on:

  • Granite rubble value from 0.5 to 1 cm;
  • sand (with a major module from 2 or more);
  • Portland cement no worse m-500.

Laying of paving slabs on a dry mixture

If we talk about specific modifications, then the deserved glory uses:

  • Russian “Birsss” and “Petrolyt”;
  • Finnish vetonit;
  • American Kreisel (found in a variety of options).

All of them are usually packaged in bags of 25 kg.

Laying of paving slabs on a dry mixture

Laying of paving slabs on a dry mixture

Laying of paving slabs on a dry mixture

Laying of paving slabs on a dry mixture

Also can also be applied:

  • Water permeable drainage solution TDM / TCE;
  • Trail mixtures for thickened waterproof layers, such as NVL 300;
  • Moderately thick calculations TNM Vario-FX and analogues.

With a limited budget, it is necessary to host the territory “on the Hard”. So in everyday life call a dry sand-cement mixture (PCS). Its exact composition varies quite wide. On 1 share of cement may have from 4 to 8 stakes of sand.

The optimal sealing coefficient is 1.18 (if the vibration plate is used).

Laying of paving slabs on a dry mixture

Consumption

For a paving, the thickness of the support mixture cannot be less than 3 cm. It is better to even do even more to ensure the highest possible. Dry layout proportions are usually accepted as 1 to 3 – by 1 share of cement (protruding in the role of a binder) use 3 stakes of sand. But the problem is that it is not too reasonable to proceed from these proportions, since the pretty part of the mixture will be lost in the process of traaming.

Suppose you need to make a length of 12 m. Width (gap separating borders) Let’s take 0.8 m. Under such conditions and at the design depth of 0.15 m, the required volume of the composition is obtained by multiplying all three digits and the addition of reserve of 20%. TOTAL –1700 kg of working mix.

Laying of paving slabs on a dry mixture

Laying of paving slabs on a dry mixture

Accurate calculation of cement-sand composition per 1 m2 produce much more difficult. Suffice it to say that on all popular resources this topic or costs ice silence, or is supposed to be excessively in common. There are extensive reasoning on how to prepare a mixture in the required quantity. However, in practice, it still has to charge the calculation, including for seams, specialists – absolutely always and with any work. Too many subtleties and nuances appear in this case.

Laying of paving slabs on a dry mixture

The main stages of laying

Typical laying technology (regardless of the selected mixture, the type of tiles and so on) includes:

  • the loss of the underlying mass (otherwise crushed it will not provide the necessary stiffness and the base geometry will be impossible to support);
  • The installation of border stones with a cement solution or a full-fledged concrete is an important condition for the formation of spatial “trough”;
  • fastening of rainmobiles and storm trays;
  • Tile layout in prepared volume.

In any case, to put sidewalks with your own hands correctly, the territory should be carefully placed. For this purpose, the so-called hoarse. They do, connecting a couple of wooden stakes and bringing additionally horizontal planks. You need to put such hoops at the edges of the laiddenity of the site.

Stretching cords required with a slope in a certain side by 10-15 mm (in terms of each meter of length) – otherwise the natural stock of precipitation is not provided.

Laying of paving slabs on a dry mixture

To spend less time and quickly start laying the tile itself, it is worth fitting the width of the track in proportion to the width of the blocks themselves. Even in this case, alas, avoid blocking will not be able to. However, labor costs will noticeably decrease. If it is necessary to work on a radius or on a plot with a curvilinear form, it is desirable to place it by building paint or lime mortar.

Before putting a solution based on a dry mixture, the surface is required to prepare. For this:

  • cut off the fertile mass of at least 0.4 m deep into;
  • put the separation layer (ideally expensive or geotextiles);
  • fall asleep at least 10 cm rubbed;
  • form borders;
  • seal crushed stone manually either vibration slab.

Laying of paving slabs on a dry mixture

Laying of paving slabs on a dry mixture

If there are assistants, you can simultaneously lay out and solid, and tropped tiles. But practice shows that it is much more productive to start with integer fragments, and then put the pieces. The tile after installation in place is heated by rubber Cyans strictly by level. Square blocks lay out strictly by rows.

But the design of a complex form is more correct to have a ledge.

Laying of paving slabs on a dry mixture

Recommendations

And a few more useful councils of specialists:

          • Protect radii is better from a smaller side, spreading seams with a small wedge;
          • At the intersections you can use a variety of drawings;
          • saturate the seams better the same mixtures that are used to calculate or, more professionally, replace them with quartz sand.

          Laying of paving slabs on a dry mixture

          How to put the paving slabs on the dry mixture will tell the following video.

          Rate article
          ( No ratings yet )
          Share to friends
          Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
          Add a comment